Verified
Write a Review
Our Products
Industrial Machinery
2 Products availableTesting Equipments
1 Products availableMeasuring Instruments & Equipment
1 Products availableDynamometer
1 Products availableEngine & Engine Parts
1 Products availableFuel Injection System
1 Products availableGearbox & Gear Parts
1 Products availableWe offer a complete product range of Motor Car Steering, Thermal Conductivity (Insulating Powder), Car Chases, Venturimeter & Orificemeter Setup and Losses Due to Friction in Pipelines
We are an illustrious Manufacturer and Supplier of Motor Car Steering from Ambala, Haryana. Our team of adroit professionals precisely construct the Car Steering system with all essential parts installed including front axle with wheel & braces, brake drum and steering arm, track rod which are completely mounted on base. Owing to our efficient logistics network, customers can rely on us for delivering small or bulk orders of Motor Car Steering.
We bring to afore the Lab Apparatus, which is meant to appropriately measure the Thermal Conductivity of the Insulating Powder. We share space with the A-listed Manufacturers and Suppliers of the Thermal Conductivity (Insulating Powder) Apparatus from Haryana, India. Our quality auditors fastidiously check these Heat Transfer Lab Equipments to ensure complete compliance. For rational pricing, count on us!
Scope of Experimentation :
Utilities required :
Technical Details :
Whole set up is mounted on powder coated base plate.
Owing to our rich industry experience, we are counted among the eminent Manufacturers and Suppliers of Car Chases. It is made out of full size original used car/van/LCV/Truck/tractor chassis. In order to meet the bulk and urgent requirements of the buyers, we maintain a large stock of the Chases in our state-of-the-art warehouse. Buyers can obtain these at market-leading rates from us.
Details : The cut section model is constructed such that all the following systems can be demonstrated in working conditions
Engine : Maximum parts and accessories of an engine like of the cylinders, cylinder head, Inlet and Exhaust manifolds, Fuel system, Lubrication system, cooling system, self-starter, Alternator, etc, are sectioned to show the internal constructional details.
This complete sectioned models is coupled with 220/230V A.C single phase Motor through a Reduction drive unit. By running the motor the complete working details of the individual parts, different mechanisms can be demonstrated as the model is running at a very low speed (about 15 to 20 rpm).
Transmission System : It consists of a Clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The Hydraulic/Mechanical circuit from the pedal to the Clutch is active and will help to demonstrate the response of clutch systems. The gearbox is coupled to Differential gear box with an axle and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting.
Fuel System :The components related to fuel system will be suitably sectioned and made working to explain the internal details of the system.
Exhaust System :It consists of Exhaust Manifold and silencer in cut section to explain internal construction.
Lubrication System :It consists of the engine Lubrication system along with the Lubrication oil pump.
Suspension System :This will explain both the front and rear Suspension systems along with necessary linkages etc. The construction and internal details can be explained using the same.
Braking System :This Mechanical/Hydraulic/Air circuit of the Braking mechanism is suitably sectioned to show the internal constructional details. The principle of Pedal braking and hand braking can be explained . (Only Hydraulic Braking circuit will be made working.)
Steering Mechanism :This can be seen and included in the Steering wheel, Steering gear and coupling at the wheels.
Electrical System :The Electrical system gives a complete idea of the electrical system and circuit of a vehicle. It has been provided with Sectionised battery and terminals are provided to connect another working battery to show the working of the individual parts and accessories such as a Sectionised Self starter, Alternator, Wiper Motor, Distributor, Horn relay, etc., and working of head light Brake light, side indicator, Horn, parking lights, spark in spark plugs, etc
We, hailing from Haryana, are among the high-standing Manufacturers and Suppliers of the Venturimeter & Orificemeter Setup across the country. Contrived using innovative technology and quality-examined raw materials, our Venturimeter & Orificemeter Setup assures infallible performance and durable life. Place order with us; bespoke or bulk & fetch lucrative offers.
Scope of Experimentations :-
Utilities Required :-
Technical Details :-
To prevent Losses Due to Friction in Pipelines, we have come up with the highly-efficient range of Fluid Machine and Hydraulic Lab Equipment. Made with inch perfection, these Machines are deeply appreciated for accurate functionality, high durability and low upkeep. We facilitate the buyers by offering these Machines & Equipments to them at unbeatable prices.
Scope of Experimentations :-
Utilities Required :-
Technical Details :-
The whole set-up is well designed and arranged in a good quality painted structure.
Based in Haryana, we have built a wealth of reputation for manufacturing and supplying the Double Stage Air Compressor Test Rig of superlative quality. Our deft team aligns these Double Stage Air Compressor Test Rigs with the prevailing industry standards to guarantee fail-safe functionality to the buyers. Plus, the prices quoted by us are insignificant in comparison to the quality!
Scope of Experimentations :-
Utilities Required :-
Technical Details :-
The whole set-up is well designed and arranged in a good quality painted structure.
Situated in Haryana, we are the credible Manufacturer and Supplier of the Multi Cylinder Four Stroke Petrol Engine Test Rig Rope Break Dynamometer in the country. Designed with perfection, these I.C. Engines are immensely demanded for the applications in laboratories, automobile industries & domestic and industrial sectors. Furnished in different stipulations, these are economically priced by us.
Description : IC engines are widely used in automobile, domestic and industrial sector. They are classified to cycle number of cylinders, arrangement of cylinder, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC engine, dynamometer, fuel measuring, air intake measuring and various other arrangements, provision for mores test is done.
Scope of experimentation :
Technical Details : Engine : A four stroke, four cylinder, water cooled, self start, lubricating petrol engine provided with battery dynamics, lubrication oil filter, air cleaner, ignition and clutch arrangement.
Type of Loading :
Customers can get in touch with us for acquiring our range of Rear Axle Assembly. Located in Ambala, Haryana, we are a well-known Manufacturer and Supplier of Rear Axle Assembly. Our assembly is stable as it is fitted on heavy wooden base divided into various sections to show different parts including pinion and bevel, crown wheel, brake drums, etc. We are offering Rear Axle Assembly to customers at nominal prices.
Our company has made its mark as the reputed Manufacturer and Supplier of Multi Cylinder Four Stroke Diesel With Electric Brake Dynamometer from Haryana (India). The Electric Brake Dynamometer, we offer, is fabricated using the latest technology under the guidance of our experts. Conforming to the international quality parameters, our Brake Dynamometer is performance oriented. Rely on us for reasonable price!
Details :
Purchase from us the Torsion Testing Machines (50Kg-m) at economical prices. These Torsion Testing Machines are performance-oriented, sturdy and durable. Further, they are in line with the international quality standards. To get these Machines at fair prices, contact us. Located in Haryana (India), we are a trustworthy Manufacturer and Supplier of Torsion Testing Machines (50Kg-m).
Specification :
Digital Mode Also Available : Torsion Testing Machine is designed for conduction torsion and twist tests on various metal wires, tubes sheet materials. Torque measurement is by pendulum dynamo meter system. Torque ranges can be adjusted. Torque can be applied to specimen by geared motor through gear box. Autographic recorder can be provided to know the relation between torque and angle of twist on specific request.
We are a reputed Manufacturer and Supplier from Ambala, Haryana involved in providing high quality Refrigeration Kit. Our Refrigeration Kit is easy to operate on and known for its accurate calculation. We ensure customer satisfaction by testing the kit on various parameters before dispatching. Buyers can acquire Refrigeration Kit at reasonable rates.
Used for :
Details :
We bring forth a qualitative range of ICE Plant Tutor Test Rig for our esteemed customers. Our test rig is preferred by professionals for its compact design, smooth operation and dependable result. Our company is a renowned Manufacturer and Supplier of ICE Plant Tutor Test Rig from Ambala, Haryana and known for our fair pricing policy.
Used for :
Details :
We are ranked amongst the credible Manufacturers and Suppliers of Diesel Engine Fuel Supply System based in Ambala, Haryana. Our Diesel Supply System consists of original parts including diesel tank, Filter, Fuel injector pump and atomizer. We check the system on stringent quality parameters before delivery to ensure customer satisfaction. We are proficient in delivering any order of Diesel Engine Fuel Supply System to any part of the country.
We are engaged in manufacturing and supplying Air Conditioning Test Rig from Ambala, Haryana. Our Test Rig is widely preferred across the country to accurately measure the cooling capacity of the air conditioner. Customers can obtain Air Conditioning Test Rig in retail or bulk orders from us at most economical rates.
Used for :
To study PH and psychometric chart
Details :
To study the By Pass Factor of a cooling coil : Technical Specifications of the Equipment.
From Haryana (India), we are a distinguished Manufacturer and Supplier of Impact Testing Machine (Izod & Charpy). The Impact Testing Machines that we make available are widely acclaimed in the national market because of their several features like compact design, outstanding performance and longer functional life. With us, feel free to place medium as well as bulk orders of The Pendulum Impact Testers.
Details : The impact energy absorbed by the specimen during reputure is measured as the difference between the height of drop before repute and the height of rise after rupture of the test specimen and is read on the dial scale.
We deal in the Motorized Gyroscopes that are accurately constructed, and performs without a flaw for the long duration. We are associated with the #1league Manufacturers and Suppliers of the Motorized Gyroscope in India. To assure unscathed delivery, we enclose the Motorized Gyroscopes in tamper-proof packaging. Also, the prices quoted by us are pretty reasonable.
Description : The set up consists of heavy disc mounted on a horizontal shaft, rotated by variable speed motor. The motor shaft is coupled to a motor mounted on a trunion frame having bearing in yoke frame, which is free to rotate about vertical axis. A weight pan on other side of disc balances the weight of motor. Rotor disc can be move about three axis. Torque can be applied by calculating the weight and distance of weight from the center of rotor. The gyroscopic couple can be determined.
Scope of Experimentation :
Utilities Required :
Technical Details :
Based in Haryana (India), we are a notable Manufacturer and Supplier of Universal Spring Testing Machine. We have a team of adroit professionals who use high-grade materials and the latest production methods for fabricating the Spring Testing Machines. Their features like sleek design, remarkable performance and high durability make them an attractive deal at such reasonable prices.
Details : The machine is designed to conduct tention test and comperision test on spring specimen and calculate the "K" factor. The comperision plates are harded ground and polished with guides provide on the bottom platen to eliminate slippage of spring during testing.
Specifications :
Description:
The experimental set up consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. A cylinder shell filled with the asbestos insulating powder surrounds the middle portion of the bar. The temperature of the bar is measured at different sections. Heat input to the heater is given through variac and measured by Digital Voltmeter and Digital Ammeter. By varying the heat input rates, wide range of experiments can be performed. Water under constant head condition is circulated through the jacked and its flow rate and temperature rise is noted.
Scope of Experimentation:
To plot the temperature distribution along the length of bar.
To determine the thermal conductivity of given bar at various temperatures.
Utilities Required:
Water supply 3 lit/min (aprrox)
Drain.
Electricity Supply : 1 Phase. 220 V AC, 2 AMP.
Table For set-up support.
Technical Details:
Metal Bar : Material Copper, length 450mm and dia. 25mm.
Insulating Powder Shell : Length 250mm and Dia 200mm.
Cooling Water Jacket : Length 75 mm and Dia. 100 mm.
Heater : Nichrome Wire.
Water Flow Measurement : Measuring Cylinder and Stop Watch.
Control Panel Comprising of: a. Digital Voltmeter : 0-300 Vots.
b. Digital Ammeter : 0-2 Amp.
c. Variac : 0-230 V, 2 A.
d. Digital Temperature : 0-200°c with multi switch
e. Temperature Sensor : RTD PT- 100 Type (8 nos)
Description:
The set-up is designed to determine thermal conductivities of insulating materials in the form of slabs. The apparatus consists of main central heart and ring guard heater, sandwiched between the specimens. Cooling plates are provided on the either wide of the specimen. Two identical specimens are clamped between heater ensures unidirectional heat flow through specimen. The whole assembly is kept in chamber and insulated by ceramic wool insulation around the set up.
Scope of Experimentation:
Determination of thermal conductivity of insulating material in the form of slab.
Study of variation of thermal conductivity of the material with temperature.
Utilities Required:
Water supply 5 lit/min (aprrox)
Drain.
Electricity Supply: 1 Phase. 220 V AC, 2 AMP.
Table For set-up support.
Technical Details:
Specimen : Dia ( 180 mm approx.), Thickness ( 12 mm )
Central Heater : Dia 100 mm, sandwiched between copper plates.
Ring Guard Heater : Width 35 mm, sandwiched between copper rings.
Cooling Chamber : Made of Aluminum for water circulation. 2 Nos.
Insulation : Ceramic Wool.
Control Panel Comprising of: a. Digital Voltmeter : 0-300 Vots.
b. Digital Ammeter : 0-2 Amp.
c. Variac : 0-230 V, 2 A.
d. Digital Temperature : 0-200°c with multi switch
e. Temperature Sensor : RTD PT- 100 Type (6 Nos.)
Description:
The set up is designed to study the heat transfer in a pin fin. It consists of pin type fin fitted in duct. A fan is provided on one side of duct to conduct experiments under forced draft conditions. Air flow rates can be varied with the help of damper provided in the duct. A heater heats one end of fin and heat flows to another end. Heat input to the heater is given through variac. Digital temperature indicator measures temperature distribution along the fin.
Scope of Experimentation:
To study temperature distribution along the length of fin in both free and forced convection.
Comparison of theoretical temperature distribution with experimentally obtained distribution.
Utilities Required:
Electricity supply: 1 Phase, 220 V AC, 1 KW.
Bench Area of 1.5 x 1.5 m.
Technical Details:
FIN
Material : Brass
Size : 12.5 mm (aprrox), 15 cm long (Aprrox)
Duct : made of Stainless Steel
Heater : Nichrome Wire (band type)
Control panel Comprising of
Dimmerstat : 0 - 230 V, 2 A
Digital Temperature Indicator : RTD PT- 100 type ( 6 Number) 5 for Pin
and one for duct temperature.
The whole set up is mounted on a powder coated base plate.
Metallurgical Polishing Machine Disc with ¼ hp ac motor with lapping
control speed 100rpm to 1400 rpm with 1000W electronic regulator comes with
powder coated finish machine facilitates to bring the specimen to mirror finish.
With disc dia 8”&rust proof S.S basin with following accessory
(DOUBLE PIPE HEAT EXCHANGER)
Description:
Heat exchanger is devices in which heat is transferred from one fluid to another. The apparatus consists of a concentric tube heat exchanger. Hot water flows through inner tube in one direction only and cold water flows over the inner tube in outer tube. Direction of cold fluid flow can be changed from parallel or counter to hot water so that unit can be operated as parallel or counter flow heat exchanger. Flow rates of hot and cold water are measured using Rota Meters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and Digital Temperature Controller.
Scope of Experimentation:
To calculate the following parameters both for parallel and counter flow arrangement.
To find the rate of heat transfer.
To calculate the LMTD.
Overall heat transfer co-efficient.
To compare the performance of Parallel and Counter flow heat Exchanger.
Utilities required:
Water supply 10 lit/min (aprrox.)
Drain.
Electricity Supply: 1 Phase. 220 V AC, 3 KW.
Floor Area 2m x 0.6m
Technical Details:
System : Water to Water.
Length of Heat Exchanger : 1.6 m
Outer Tube : OD= 33.8mm and ID= 27.5mm
Water Flow Measurement : Measuring Cylinder with stop watch, Rota Meter
for cold and hot fluid.
Hot Water Circulation : Magnetic Pump made of Polyproplene to circulate
hot water for maximum temperature of 85°C.
Heater : Nichrome Wire Heater ( 2 Nos. )
Control Panel Comprises
a. Digital Temperature Controller : 0-199°C ( for Water Tank)
b. Digital Temperature Indicator : 0-199°C ( With Multi Channel Switch)
c. Temperature Sensors : RTD PT- 100 Type 6 Nos
Mr. Vishvanath Verma (Shri Sai Mechanical Engineering)
787/88, Cross Road No. 5, Near Hargolal Post Office, Ambala Cantt, Haryana - 133001, India
Share us via
View Contact Number 
