HUBLI, Karnataka, India
Our Products
| Two Bottom Fixed Mould Plough are tractor drawn conventional implement being widely used for primary tillage operations.It can perform toughest ploughing jobs by cutting heavy thrash and burying it completely with deeper penetrations at any hard soil conditions. Extra heavy duty sturdy mainframe construction and usage of wear resistant shares with hardened steel bar points ensure longer life to the plough. These ploughs can be easily attached to a tractor through 3 point linkages and operated with help of tractor hydraulic. FEATURES
|
| MODELS | SPECIFICATIONS | CUTTING DEPTH in mm. |
CUTTING WIDTH in mm. |
WEIGHT in Kgs. |
|
35 HP HD |
FOR 25 HP TO 35 HP TRACTORS | 300 | 600 | 200 |
| 50 HP HD | FOR 36 HP TO 50 HP TRACTORS | 350 | 660 | 230 |
|
60 HP HD |
FOR 51 HP TO 60 HP TRACTORS | 400 | 710 | 250 |
| Single Bottom Reversible Plough has been designed and developed in Heavy Duty models to perform primary tillage operations satisfactory at any soil conditions providing deep opening and loosening of the soil. It can be attached easily to a tractor through three point linkage and operated with the help of tractor hydraulic Usage of heavy duty main shaft, wear hardening technology in clutch box & special manganese steel share points increases the life of the plough.The plough can cut thrash and buries it completely as well as it can cut heavy soil clods into small particles and give complete inversion of the soil. features
|
| MODELS & H.P. OF THE TRACTORS | PARTICULARS | CUTTING DEPTH in mm. |
CUTTING WIDTH in mm. |
WEIGHT in Kgs. |
|
CHETAK SPECIAL |
Used 100 mm shaft and Heavy Duty Tines | 410 | 450 | 250 |
| ECONOMY (For 35 HP to 45 HP Tractors) |
Used 80 mm shaft and Medium Duty Tines | 350 | 425 | 225 |
|
ROYAL-25 |
Used 80 mm shaft and Medium Duty Tines | 325 | 325 | 190 |
| YUVARAJ (For 18 HP to 22 HP Tractors) |
Used 70 mm shaft and Medium Duty Tines | 190 | 275 | 110 |
| In confirmity with the soil conditions it is being produced with 2, 3, 4 & 5 bottom versions. | |
| It is directly mounted to the tractors | |
| Extra Heavy-duty pipe frame has high trash clearance allowing the plough to operate under heavy crop residue. | |
| It is used to open the new fields and to process the stony areas. | |
| It can be used easily at rocky and rooted areas. | |
| It is especially useful in hard and dry trashy land conditions and in soils where scouring is a major problem. | |
| MODELS | 2 BOTTOM DISC PLOUGH | 3 BOTTOM DISC PLOUGH | 4 BOTTOM DISC PLOUGH | 5 BOTTOM DISC PLOUGH |
| SIZE | 2 Bottom | 3 Bottom | 4 Bottom | 5 Bottom (4+1) |
| FRAME | Extra Heavy Duty Tubular Frame (0D-168mm, ID-146mm) | Extra Heavy Duty Tubular Frame (0D-168mm, ID-146mm) | Extra Heavy Duty Tubular Frame (0D-168mm, ID-146mm) | Extra Heavy Duty Tubular Frame (0D-168mm, ID-146mm) |
| MOUNTED | CAT II | CAT II | CAT II | CAT II |
| LENGTH | 1800mm | 2400mm | 3000mm | 3600mm |
| WIDTH | 820mm | 1040mm | 1260mm | 1480mm |
| HEIGHT | 1220mm | 1220mm | 1220mm | 1220mm |
| DISCS | 660 x 6mm | 660 x 6mm | 660 x 6mm | 660 x 6mm |
| DISCS SPACING | 570mm | 570mm | 570mm | 570mm |
| COLTER DISC | 500 x 6mm | 500 x 6mm | 500 x 6mm | 500 x 6mm |
| SCRAPPER | 6mm adjustable | 6mm adjustable | 6mm adjustable | 6mm adjustable |
| BEARINGS | 2 nos. taper Roller / Disc | 2 nos. taper Roller / Disc | 2 nos. taper Roller / Disc | 2 nos. taper Roller / Disc |
| WIDTH OF CUT | 500-550mm | 875-925mm | 1150-1200mm | 1575-1625mm |
| WEIGHT (approx.) | 295 kg | 395 kg | 495 kg | 590 kg |
| TRACTOR POWER | 50-65 HP | 70-85 HP | 90-110 HP | 120-150 HP |
Offset Disc Harrowis tractor hydraulic operated implement which trails behind the tractor and effectively breaks up clods with deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried. Provision of handle screw enables it for the adjustment of inclination required for the disc penetration depth hence suitable for different cutting depths for varying soil conditions. Heavy duty sturdy mainframe with heavy duty spools and hardened discs ensure proper centerweight and longer life.
FEATUES
| Sturdy Mainframe and design. | |
| Handle Screw arrangement for cutting depth adjustment. | |
| Hardened sharp edged discs to ensure proper cutting of roots and clods. | |
| Easy to mount on tractor with three point linkages and easy to operate. |
| MODELS | WIDTH in mm |
LENGTH in mm. |
HEIGHT in mm. |
WORKING CAPACITY in mm |
WEIGHT in Kgs. |
| 10 Disc | 1650 | 1550 | 1250 | 1150 | 310 |
| 11 Disc | 1550 | 1800 | 1250 | 1420 | 340 |
| 12 Disc | 2100 | 1500 | 1371 | 1250 | 355 |
| 14 Disc | 2130 | 1803 | 1371 | 1450 | 410 |
| ADVANTAGES & SPECIAL FEATURES : | |
| Heavy Duty main frame. | |
| Boron steel discs for more life. | |
| Angle adjustments. | |
| Easy attachment & easily transportable. | |
| SIZE | 7X7 | 8x8 | 9x9 | 10x10 |
| No. of Disc | 14 | 16 | 18 | 20 |
| FRAME | Heavy Duty Box Frame | Heavy Duty Box Frame | Heavy Duty Box Frame | Heavy Duty Box Frame |
| Gang Bolt | Centre Square Solid Bar 31mm | Centre Square Solid Bar 31mm | Centre Square Solid Bar 31mm (Split Gang) | Centre Square Solid Bar 31mm (Split Gang) |
| Distance between Disc | 225 mm | 225 mm | 225 mm | 225 mm |
| Disc Diameter | 610mm Boron Steel | 610mm Boron Steel | 610mm Boron Steel | 610mm Boron Steel |
| Type of Disc | Notched in Front & Plain in Rear | Notched in Front & Plain in Rear | Notched in Front & Plain in Rear | Notched in Front & |
| ADVANTAGES & SPECIAL FEATURES : | |
| Sturdy main frame. | |
| Heavy duty spindle and bearing hub. | |
| Boron steel discs for more life. | |
| MODELS | NO. OF DISC | DIAMETER OF DISC | MAX. WIDTH BETWEEN RIDGER | WORKING DEPTH | FRAME WIDTH | TRACTOR POWER | WEIGHT In kgs. |
| 2 BOTTOM DISC RIDGER | 2 Nos. | 660 x 6 mm | 1000 mm | 330 mm | 1840 mm | 35 - 40 HP | 195 |
| 4 BOTTOM DISC RIDGER | 4 Nos. | 660 x 6 mm | 1000 mm | 330 mm | 2520 mm | 60 - 75 HP | 452 |
