GST : 24AHGPS9379D1ZX
Verified
Write a Review
Our Product / Services
Paints
2 Products availableHose Pipes
2 Products availableSpanners
2 Products availableHand Tool
2 Products available
Typical Use
Heat Resistance
Rapidgrip wrench
When using a pipe wrench of any size. a gap must be maintained between the shank of the hook jaw and the work piece. (Figure 3) This permits the two gripping points (heel jaw teeth and hook jaw teeth) lo produce the gripping action of the wrench. Allowing the shank of the hook jaw to contact the work piece greatly reduces the gripping action and can cause slippage. It may also result in the failure of tie hook jaw. (Figure 4)
Compound Leverage Wrenches
Mount trunnion on pipe dose to treads, with shankd Pun-nion pointing towards the threads as shown in Ague 6A. %litho:liner pipe, hook inb ears& trumionand secure' tighten with chain screw handle.With wrench head property adjusted fa work piece size (maintoingap between hock jaw shank and woik piece), place the end of the wrench handle aver the shankof the trumion. Place tiewrench head on the work piece. Secure the wrench handle b tie trunnion shark with fiscal& pin.(Figne6B)
Details
| Pipe Wrench Size | Suggested Pipe Size Range | Maximum Pipe Size |
|---|---|---|
| 6" | 1/8" – 1/2" | 3/4" |
| 8" | 1/4" – 3/4" | 1" |
| 10" | 1/4" – 1" | 1 1/2" |
| 12" | 1/2" – 1 1/4" | 2" |
| 14" | 1/2" – 1 1/2" | 2" |
| 18" | 1" – 2" | 2 1/2" |
| 24" | 1 1/2" – 2 1/2" | 3" |
| 36" | 2" – 3 1/2" | 5" |
| 48" | 3" – 5" | 6" |
| 60" | 3" – 6" | 8" |
Figure 3 - Maintain Gap Between Hook Shank And Work Piece
Make sure the work piece is stable and well supported to prevent tipping and falling during use.
When using a pipe wrench of any size. a gap must be maintained between the shank of the hook jaw and the work piece. (Figure 3) This permits the two gripping points (heel jaw teeth and hook jaw teeth) lo produce the gripping action of the wrench. Allowing the shank of the hook jaw to contact the work piece greatly reduces the gripping action and can cause slippage. It may also result in the failure of tie hook jaw. (Figure 4)
Figure 4 -Wrench Too Small For Work Piece, Hook Shank Touching Work Piece.
Adjust The hook position by rotating the nut as needed. Wench should be square to the pipe. Do not use with the wrench at an angle to the pipe.
Duratuf multipurpose Rubber Sheet is an all-purpose rubber sheet in black colour made from Ethylene Propylene Diene monomer, commonly known, as EPDM Rubber. It has high temperature esistance and chemical resistance to most acids and alkalis. It is UV stable making it highly resistant to ozone effects and extreme weather conditions and is ideal for both indoor and outdoor applications.
Our multipurpose rubber sheet has good physical properties and is resistant to hot water and steam.It offers the best price to performance ratio delivering a superior value propositions for its buyers. It is however , not recommended for application having contact with oil and hydrocarbons.
CompositionWEICON Plastic Metals are two-component epoxy resin systems. All types are supplied in a retail package which contains the resin and hardener components in the correct mixing ratios. Depending on type, the resin component is filled with either steel or aluminium powder or in some cases, a mineral filler (except Casting Resin MS 1000).
The different hardeners determine the viscosity and curing behaviour of each product type.
StorageStore WEICON Plastic Metal dry at room temperature. Unopened packages can be stored at temperatures from +18°C to +28°C for at least 24 months after the date of delivery (Epoxy resin putty - max. 36 months). The contents of opened packaging must be used up within 6 months.
ApplicationsMany different materials may be reliable and durable bonded to themselves and among each other, e.g.:
For workshops and maintenance departments in all industries,
WEICON Plastic Metal is the ideal product for:
Details
Technical Details
| Catalog Number | Model No. | Total Length | Pipe Capacity | Chain Length | Chain Breaking Load | ||||
| In. | Mm. | In. | Mm. | In. | Mm. | Lb. | Kg. | ||
| R 92665 | 3229 | 27 | 686 | 1/4-21/2 | 13-73 | 17 1/2 | 445 | 13800 | 6260 |
| R 92670 | 3231 | 37 | 939 | 3/4-4 | 26-114 | 22 1/2 | 572 | 17600 | 7983 |
| R 92675 | 3233 | 44 | 1117 | 1-6 | 33-168 | 32 | 813 | 20100 | 9117 |
| R 92680 | 3235 | 50 | 1270 | 11/2-8 | 48-219 | 40 1/2 | 129 | 22000 | 9979 |
| R 92685 | 3237 | 87 | 2209 | 2 -12 | 60-323 | 55 1/2 | 1410 | 31000 | 14061 |
| R 92660 | 3215 | 87 | 2209 | 4- 18 | 114-457 | 74 1/2 | 1892 | 56000 | 25401 |
Friction Properties
Co-efficient of Friction
Operating Temperatures
Mechanical Properties
Technical
Additional Information:
Payment Terms : L/C, D/A, D/P,
Weight Lifting Size List :
| Lifting Capacity | Chain Length | |
| 1 Ton | 3 Mtr | 6 Mtr |
| 2 Ton | 3 Mtr | 6 Mtr |
| 3 Ton | 3 Mtr | 6 Mtr |
| 5 Ton | 3 Mtr | 6 Mtr |
| 10 Ton | 3 Mtr | 6 Mtr |
Applications :
Can be used in virtually many types of sealing applications throughout industry including :
Duratuf Multipurpose Rubber Sheet is an all-purpose rubber sheet in black colour made from Ethylene Propylene Diene Monomer, commonly known, as EPDM Rubber. It has high temperature resistance and chemical resistance to most acids and alkalis. It is UV stable making it highly resistant to ozone effects and extreme weather conditions and is ideal for both indoor & outdoor applications.
Our Multipurpose Rubber Sheet has good physical properties and is resistant to hot water and steam. It offers the best price to performance ratio delivering a superior value proposition for its buyers. It is however, not recommended for application having contact with oil and hydrocarbons.
Applications
Duratuf Multipurpose Rubber Sheet has been designed primarily for use as a flexible strip, pad, lining or gasket and is mainly used for Sealing, Insulating, Isolating and Protecting steel or other surfaces. Its properties make it suitable for a number of applications including :
