Shri Krishnaji Industries

Panki, Kanpur, Uttar Pradesh

Shri Krishnaji Industries Disintegratorsare well designed hammer mills of simple andsturdy construction.

They are ideally suited where coarse grinding of soft and medium hard minerals products is required. The main shaft is the only revolving parts, which require no adjustment. This main shaft runs on Ball/Roller bearings and it contains fix/swing type hammers. The fineness of the finished products is controlled by the replaceable screens fitted on the lower of the disintegrator body. The screens of desire mesh can be easily changed. All portions of the body where wear and abrasion is expected are lined with replaceable hard alloy liners. The screen is adjustable.

The grinding (disintegration) is achieved by the impact of hammers against the liner fitted in the body; and the fine products passes through the screens of desired fineness.

Range of Sizes

Shri Krishna Disintegratorsis available in Eight Sizes of different production capacities and power consumption.

Beaters

The beaters are of steel alloy forged and heat treated. Their tips are coated with hard alloy.

Screens

There are two kinds of screens
(1) Steel Screens:having steel bars welded in steel frame for heavy work.
(2) Perforated steel Plate screens:held in M.S. iron frame suitable to fibrous materials and light work.

shri krishnaji pin millis specially designed to deal efficiently and economically with a wide range of materials and can be easily adjusted to give the fineness required from a coarse granulation to finely ground powder.

pin millgrinding is gradually done from the centre to the periphery of the rotor, allowing heavy pieces of material to be reduced by stages to the fineness required. Constructional materials and operating components are manufactured out of the best applicable raw materials, so as to yield close particle size for a similar product.

pin millyields greater output in relation to the electrical energy consumed, since the material can be ground is fed automatically in the centre of the rotor by the feed hooper provided with an automatic vibrating tray / rotor feeder & gear box for automatic feed.

pin millis subjected to rigid final inspection and actual grinding tests at our experimental station before it is delivered to the stores for dispatch. Grinding tests with your materials can also be carried out without obligation, to testing the suitability of the pin mill for your satisfaction.

industries pin mill is used in

(1)dye stuff pigment and color
(2)chemical
(3)food stuff
(4)spice
(5)bakery
(6)confectionary
(7)agro
(8)salt
(9)ayurveda
(10)pharmaceutical
(11)dehydrated fruit fit and vegetable
(12)tea
(13)cosmetic
(14)glass
(15)plastic
(16)bakelite fit resin
(17)mineral
(18)ceramic
(19)rare earth metallic ore
(20)explosive item
(21)cattle feed
(22)tobacco-snuff
(23)wood chips
(24)coke and other many

applications

[1]permissible feed size up to 6.00 mm
[2]fineness achievable up to 40 mesh
[3]permissible hardness up to 3 moh's scale
[4]permissible brittleness medium to high
[5]permissible moisture up to 3%

standard supply

pin mill fitted with feed hooper, set of fixed beater plate, set of rotor plate, screen drum with screen, & v pulley for machine.

It should be noted that for finer and of average heavy work, the medium Size disintegrator is more suitable. The larger sizes are more suitable for coarse grinding.

It is better to install coarse screen and shift in rotary shifter afterwards (if necessary) to separate fine mesh powder. Extremely fine screens. If used, continuously, restrict the out put, hence they should be avoided.

The disintegrator are supplied & fitted with one set of hammers and one pair of screens fitted in the machine.