Our Products
Pulverizers
2 Products availableConveyors
2 Products availableElevators
2 Products availableRoll Forming & Bending Machines
1 Products availableGrinding Mill
1 Products availableCrushing Machines
1 Products availableFilters & Filtration Systems
1 Products availableWet Grinder
1 Products availableDryers
1 Products availableOur product range contains a wide range of Eccentric Sieve and Cool Grinder
Shri Krishna Pulverisersis a high swing type grinding mill pulverisation is achieved by the impact of the grinding chamber. The fine Powder is swept by the blower suction from the grinding chamber via whizzer cone. The function of whizzer cone is to check the oversize particles and thus to regulate fineness SAND IS SEPARATED OUT from material from the grinding chamber by a special arrangement at an extra cost.
The blower delivers the pulverised powder in the cyclone air separator. The powder is discharged from the cyclone spout. The separated air return to the grinding chamber to complete the air circle.
The excess air is bled off through dust collector filter bags. The extra fines are collected there.
Shri Krishna Pulverisersis an ideal unit for grinding non-abrasive soft medium and hard minerals and also Gram-dal tamarind seed. The pulveriser is manufactured from best raw materials. The main body of the grinding chamber whizzer chamber and the blower are made of heavy duty cast iron every portion which comes in contact with the materials is lined with heavy duty steel plates. The striking face of the grinding chamber is lined with hard iron replaceable plates. Thus protecting the machine from wear and ensuring it for long life. The grinding chamber is provided with a pocket in which small pieces of iron nuts and bolts are trapped.
The main drive shaft is run on two double row self aligning heavy duty Ball or Roller Bearings.
Shri Krishna Double Drive Pulverisersis a high speed swing type Mill. Pulverisation is achieved by the impact of the grinding chamber. The fine powder is swept by the
Shri Krishna Double Drive Pulverisersis a high speed swing type Mill. Pulverisation is achieved by the impact of the grinding chamber. The fine powder is swept by theseparate blower from the grinding chamber via Double whizzer clamp. The function of the whizzer cone is to check the over size particles and thus to regulate fineness silica/heavy Particles Separated out through a gravity separator if necessary from material from the grinding chamber by a special arrangement at an extra cost.separate blower from the grinding chamber via Double whizzer clamp. The function of the whizzer cone is to check the over size particles and thus to regulate fineness silica/heavy Particles Separated out through a gravity separator if necessary from material from the grinding chamber by a special arrangement at an extra cost.
Shri Krishna Roller millswith integral separator provider an automatic dust free complete system for medium & fine grinding and classification of wide variety of mineral and chemicals as well as simultaneously removing surface moisture from many products while they are being grind.
Principles of OperationThe grinding operation inShri Krishna Roller Millsis performed on the principal of Attrition and compression, which results due to the centrifugal force generated from the suspended rollers running inside a stationary Bull Ring.
The material to be grind enters the grinding chamber through an automatic feeder and falls on the mills floor. There it is scooped up by steel into the nip space between the rollers and Bull Ring where grinding takes place.
A constant quantity of air is circulated through the mills and system. The air from blower enters the mills through a series of tangential ports round the bases of grinding chamber and sweeps the fine and medium fine material to the classifier above the grinding chamber leaving no grinded material in the chamber and allowing the rollers to work & efficiently crushing coarse material.
The classifier separates grinded materials, and coarse particles return to grinding chamber for further size reduction. Fine materials are carried by air to the cyclone air separators where air and grinded material are separated and collected. The clean air is returned to the blower for close circuit operation.
Dustless Operation:For providing dustless operation, the mills is operated under negative pressure and is equipped with a Dust Collector system where any surplus air in the circuit is vented and fine dust is collected in dust collector bags.
Shri Krishna Hammer Millcrushes material crushed between high-speed hammer & material, which features in its simple structure, high efficiency, etc. Hammer mill were developed for the crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries etc.
CharacteristicHammer millsis a economical unit designed for general all-round work for time saving operation. Most often, the only changes necessary are of Screen, hammers and liners.Feed Material passes through a wide feed hopper into the grinding chamber. The swinging hammers, in the rotating hammer rotor, crush materials at the stationery liners before driving them trough a screen and type of hammers used. The method of operation is impact grinding. This machine, having total flexibility. Combination of different hammer styles, liner plates, sieve inserts and wear resistance technology offer almost unlimited possibilities of crushing lumpy, bulky, irregularly shaped hard fit fibrous materials, into course to medium fine powder.
Hammer millsis subjected to rigid final inspection and actual grinding tests at our experimental station before it is delivered to the stores for dispatch, Grinding tests with your materials one also be carried out without obligation the testing the suitability of the mill for your satisfaction.
Shri Krishna Jaw Crusheris the product of long experience and skilled workmanship. The crusher is available mild steel body.
The crushing is achieved between the fixed jaw held in the body and the swing jaw held in the jaw stock. The main driving shaft, which is eccentric gives elliptical to and fro motion to the jaw stock. The discharge opening is adjustable hence the size of the end product can be controlled by the control lever.
The two heavy cast iron flywheels are provided to ensure steady running. Drive arranged either direct through the flywheels or through a suitable pulley.
Jaw Crusher Features:(A) Jaw Stockmade of heavy duty cast iron/mild steel with provision to held the swing jaw.
(B) Swing Jaware made of manganese alloy iron or steel and are replaceable can be used both ends.
(C) Fixed Jaware made of manganese alloy or steel and are replaceable. They can be used both ends.
(D) Check Plateshave two fold purposes. First it holds the fixed jaw with the body and secondly it protects the sides of the body from the wear.
(E) Tie Rodmade of steel. Meant for hold the jaw stock.
(F) Toggle Plateis made of cost iron. It impart the rolling motion to the jaw stock.
(G) Fly Wheels:made of heavy duty cast iron for ensuring the smooth running and providing reserved power to jaw.
(H) Bearing:All bearing are heavy duty ball Bearing and Roller Bearing.
(I) Control Lever:To adjust the discharge opening of the crusher.
Shri Krishna Vibrating Sieveis the most Efficient Vibrating Screen or Vibrating Sieve for Dry Screening. Vibrating Screen is compiled of mainframe, eccentric bock, screen web, rub spring, electric motor, coupler and some more. Very much suitable for chemical and Pharmaceutical Industries. Depends on physical properties and particle size of the material.
ApplicationThe top weight on the motor shaft rotates in a plane close to the centre of the mass of assembly, Rotation of the top eccentric weights creates vibration in the horizontal plane which causes material to move across the screen cloth to periphery increasing the top eccentric mass.
The bottom eccentric weight rotates below the centre of vibrating, mass creating till on the screen giving vibration in vertical & tangential planes increasing the vertical component of motion which promotes turn over of material on the screen surface helping maximum quantity of undersize material to pass through the screen.
The effective vertical motion helps in minimizing blinding of screen by near size' particles. The tangential component of motion is controlled by the angle of lead given to bottom weight with relation to top weight.
Features
Shri Krishna Eccentric Sievemoves round .It has multi-layers and is of high efficiency. The eccentric shaft vibration exciter and partial block help to adjust amplitude. The material drop down the long line .
Eccentric sieve bears the features of different specifications:-
Eccentric sieve is widely used for classification in mining, construction material, transportation, energy, etc.
Shri Krishna Belt Conveyorsare predominantly used for handling all types of packing or loose products. Depending on the use, the belt finish can either be a grip surface for inclines, low friction or food quality; this is achieved using rubber, canvas or specified materials. The frame construction can also be manufactured in various materials, e.g. mild steel, powder coated, zinc coated or stainless steel. Fixed or variable speed can be achieved via an extremely mounted end drive unit, or motorized drum assembly. Roller bed is usually preferred because it requires low power, and the belt has a longer life. Slider bed is used for loads with small, regular bases, conveyor loading areas and next to operators such as assembly stations, because it does not have high speed travelling and heavy load capacity. These conveyors are ideal for general goods transportation in application such as packing, testing, inspecting, recycling and various assembly line operations.
These types of conveyors are basically for bulk materials with variable properties depending on the application. They can be sealed against dust or moisture, jacketed to act as dryer or cooler. Screw flights fabricated in an array of configurations perform different tasks or help to convey different types of materials. Ribbon flights density and viscous materials which may usually cause bridging at the centre tube. Screw conveyors are compact and easily adapted to suit any location.
They can be manufactured in any type of orientation and direction either horizontally, inclined or vertical. These types of conveyors can be used to feed, distribute, collect or blend materials flow in processing or conveying operation.
[1]Screw feeder / dozer
[2]U- Trough / Tubular Screw
[3]Inclined Screw
[4]Bi-direction Screw
The materials of construction may be mild steel or stainless steel depending on the requirement. Special materials like polymers have also proved to be an excellent alternative to steel.
These types of elevator is mostly used for bulks materials, which are free flowing, fine or small lump materials, such as grain, sand, clay, sugar and dry chemicals. Buckets are mounted at intervals on a belt or chain. They usually operate vertically but have the capability to be designed to be inclined according to the requirement. Buckets are filled with materials by a combination of direct materials loading into buckets and by scooping from the boot, which is the lowest part of the elevator. Speed is comparatively higher and is basically controlled by the head sprocket or drum diameter and its eject from the bucket containers
These are similar to the centrifugal discharge type, except that buckets are snubbed back under head sprockets to gain a more complete discharge at a slower chain speed. The elevators can handle light aerates, dusty and sticky materials that are not easily dischargeable from a centrifugal discharge elevator. The buckets are mounted at intervals on two strands of chain. Providing a capacity equal to the centrifugal discharge type requires larger buckets or closer spacing of buckets on the chain. This is a forced type of discharge and is thus effective in transferring maximum of the carried material over to the destination.
Shri Krishna Cool Grinderwith Air Blower & Cyclone Separator along with dust collector is economical unit designed for general all round work for time saving operation. It is available in various models depending upon production capacity & HP required. All types of products pass through a wide feed hopper into the grinding chamber. The swinging hammers, in the rotating hammer rotor, crush materials at the stationery lines before passes through a screen and rotating hammers.The ground material is continuously sucked by a powerful air blower through screen and conveyed through the pipe line into the cyclone separator for bagging. The air blower maintains constant atmospheric cool air flow into mill chamber in order to obtain a cool product and continuously clean the screen, thus increasing the output of the ground material.
The particles size of the ground material can be varied by a large range of sieveswith the desired opening. The dust & ground material gets separated in the cyclone separator. Top of the cyclone air balloon is fitted. Air balloon separates clean air & dust. The dust gets collected in air balloon. As soon as air balloon shacked the dust dropped into the cyclone separator and gets collected from bottom of the cyclone separator.
Whole grinding operation is carried out in a cool atmospheric temperature, which prevent their oil, color.
Economic Products Introducing Wet & Dry Grinder. The Description of Wet & Dry grinder Machine Non Jacketed which is as Follows.
Grinding of the material by hammering & material will discharge from the screen as per customer's requirement. It is based on heavy duty Angle / Channel Frame, heavy duty main shaft with bearing housing as per our std. fifty. It is available in 8 modles
A tray or Compartment Dryer is an enclosed insulated chamber in which trays are placed on top of each other in trolleys. The material to be dried either wet or solids are placed in the tray. Heat transfer is done by circulation of hot air by electric heaters in radiator coils. Blower fans are installed inside to ensure proper circulation and transfer of heat. A control panel to control the temperature and other parameters is fixed outside the dryer. There is also arrangement of digital temperature controller.Used for converting molten Slurries into dried solid flakes. In the rotary dryers material is fed into a feed hopper which directs the materials on the face of rotating drum. The drum is heated or cooled depending on the application to enable the material to cling to the outside of the drum. The material is dried during the rotation of the drum and is removed by a blade or scrapper mounted along the length of the roll.
Materials processed in the drum dryer are:(1) Caustic Soda(2) Resins(3) Waxes(4) Fatty Acids(5) Guar Gum(6) Sulphur Dyes.
Shri Krishna Stirrersare versatile mixers used for mixing of liquid at slow speed. Any one fixed speed is provided. The units are available with various different types of impellers
Optional
Shri Krishna Rotary Air Lock Valveis designed to efficiently transfer non-stringy materials from one air system component to another, ensuring maintenance of a required vacuum or to prevent pressurization.
The air lock maintains a tight, positive air seal by keeping a maximum of the six flexible neoprene steel backed wipers in full contact with the interior housing at all times.
The neoprene wipers are bolted to the vanes of the rotor tips for easy of maintenance. The rotors are open-ended.
The rotor housing is heavy-duty steel construction with a removable side plate to provide easy access and maintenance of the rotor.
Shown below is products specification
|
HP |
1/2 HP to 2 HP |
|
Driven Through |
Belt Pulley |
|
Space Requirement |
Different as per model |
|
Feeding System |
No needs of feeding. It comes automatically through cyclone |
|
Mounting |
On Cyclone and as applicable |
|
Ideal for following Material |
For all types of Powders and Course Material which need air locking on output area or use for dust Preventive |
Shri Krishna tablet punching machine has following salient features
Kalpi, Jalaun, Uttar Pradesh 
