Our Products
Jigs, Casting Dies, Die Casting Moulds & Moulding Tools
2 Products availableMarking Machine
1 Products availableCompression Springs & Air Springs
1 Products availablePVC, PP & Plastic Products
1 Products availableMachine And Precision Tools
1 Products availableDecoiler
1 Products availableMaterial Handling Machines & Systems
1 Products availableBearings And Bearing Components
1 Products availableOur product range contains a wide range of mold parting lock, Die Spares and mould spares
We offer Bordignon, Italy make nitrogen cylinders and nitrogen gas springand they are designed and built to guarantee the longest service life. We have more than 300 models of cylinders and mostly in stock for immediate delivery in Italy. It have six series of self contained cylinders like CS, C, CSM, TOP, SML, CISO having different sizes, load parameter, fitments and work at different temperature etc. The life of these cylinder is up to 10 Crores strokes if used according to the manufacturer advices.
Our bunch of imported products comprise of high quality PU rods and pads that have varied applications in a large number of industries. These are available with us in different specifications that enable us to successfully cater to the needs of our clients even on receiving urgent order. We strive to ensure that these rods & pads conform to the industry standards and uphold qualitative feature which fulfill industrial requirements at the actual site of use.
Polyurethane Springs comes in Rod as well as Tubular. The outer diameter of these springs ranges from 12mm to 120mm. All sizes are available in our ex-stock. Polyurethane is a new wonder material, which combines the strength of plastic and elasticity of rubber. Polyurethane can sustain very high loads and higher hardness than rubber, Corrosion resistant, Low noise and Low cost. PU-springs exceed the capacity of coiled springs in generated forces and strokes in a similar space. This is accompanied by the non-compressibility and resiliency. Life expectancy is also very good. PU springs and pads are ideally used in Press Tools, Jigs, Fixtures etc., where the action of stamping, forming, damping, cushioning involved.
Pads / Mats: The Pads and Mats are available in standard size ranges from 5mm to 40mm and size is 300mm x 300mm.
Our collection of industrial products comprises of qualitative die spares that are procured from reliable vendors who are well-known for their quality standards. We import die spares such as Spool Retainers, Wear Plates, Guide Post/Pillar Sets, Cam Units and Ball / Pin Plunger (lifters) charged with springs as well as Nitrogen Gas from Italy and Japan against requirement of customers. We also offer Sprue bushes, Sine plate, Push back pins, Date marking pins, Date inserts, Parting locks, Ball Cages etc.
These mounts have an adjustable bolt, which moves the center wedge between top and bottom stationary wedges to provide lift, to the top wedge. Anti-Skid plate is provided on the top wedge therefore, machines are installed as free standing. Large supporting surface ensures solidity and rigidity. Vibration reduction is possible through assembling respective insulation plates.
Our Anti- vibration damping and machinery installation solutions are characterized by: -
We take care that these industrial decoilers are constructed from superior grade material of construction by utilizing latest technology as per the industry standards.
Both motorized as well as non-motorized decoilers are available. This is used along with Straightener and feeder in order to automate the process for power press. This is used to hold the coil of sheet and de-coil the sheet as per the speed of power press. De-coiler posses the following characteristics:
Model | Coil Width | Coil Wt. | Coil ID Adjustment | Main Shaft | Power of Motor (if Motorised) |
SRL-300 | 100 to 300mm | 300 Kgs. | 10” to 14” | 55mm | 0.5 H. P. |
SRL-500 | 100 to 300mm | 500 Kgs. | 15” to 20” | 75mm | 1.0 H.P. |
We offer wide assortment of high performing marking machines that are sourced from well-renowned vendors who are located in technologically leading countries. Our bunch of products comprises of precision engineered marking machines which ensure deliverance of output to the optimum level. These are available with us in various technical specifications such as capacity, working speed and many more.
Electrolytic Etching machine are used to mark LOGOS or identification on untreated or finished surfaces (both flat as well as round surfaces). These machines are mostly used to mark on Bearing, Engine Valve, Piston Rings, Tools, Scissor, blades etc.
To ensure the highest levels of marking, please use reliable Stencils and electrolytic liquid. This Liquid consists of non-toxic and non-acidic mineral salts to avoid oxidation and corrosions.
Another indispensable element in the marking system is the Stencil, which bears what must be marked on the metal piece. With this stencil all the type of logos and images can be etched with surprising precision and faithfulness to the original.
We deal in Pneumatic Stripe Feeder as well as Gripper/mechanical Feeder as per Italian Standards of extremely high quality. These are perfect replacement of imported feeders at very reasonable price. All of our customers are very much satisfied with the quality of our products as well as services. We are getting repeated orders from our customers. Not only this, they are referring to others. More than 120 models available in Pneumatic feeders width ranging from 0-50mm, Pitch 0-50mm, thickness 0.05-1.8mm and sheet width up to 900mm, Pitch up to 600mm. Gripper Feeders are available in two models: 130 x 130 and 200 x 200mm.
Ball cages are made from specially treated solid Aluminum alloy and Brass. These are available in standard size and according to customers drawing also. We have following standard sizes and available in our ready stock :
Code | Pillar Dia. | Length in mm | Ball Diameter |
B 20 | 20mm | 54 & 74 | 4mm |
B 25 | 25mm | 54, 74 & 85 | 4mm |
B 28 | 28mm | 54, 74 & 85 | 4mm |
B 30 | 30mm | 58, 85 & 100,Ø 4mm | |
B 32 | 32mm | 58, 85 & 100 | 4mm |
B 38 | 20mm | 58, 85 & 100 | 4mm |
B 40 | 40mm | 58, 85 & 100 | 4mm |
B 50 | 50mm | 85,105 & 125 | 5mm |
Imported Guide Post Sets are available according to Misumi Standard. The quality is very high at very reasonable price and short lead time. The life of die depend on the quality of Guide post Sets. It has of highest accuracy under strict quality Control. The details of accuracy are as below: