Shri Balaji Scientific Works

Uttam Nagar, Delhi

We are capable of catering to the customers situated anywhere and we are located in Delhi(India). We are specialist in making available Ductility testing machine in a wide spectrum of grades and specifications. Ductility testing machine The equipment consists of the following replaceable parts Ductility mould, with base plate.3 no.

 

Details : Two rates travel 50mm/min. and 10mm/min. Electric pump circulator Heater 220v, 50hz, single phase ac supply

We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. High-quality and certified inputs are used for the production of our finished goods. We, as a trusted name, only select the certified vendors for procuring quality raw materials.

 

Specification :

• For conducting torsion and twist tests on various metal wires, tubes, sheet materials
• Capacity - 50kgm

 

Ranges : 50, 25, 25 & 10 kg-m No. of division on dial- 500 Torsion speed & direction- Fixed Reverse Clearance between grips- 0-500mm Grips for round ba r- 10-30mm Width - 40 mm Motor - 3 H.P.

TORSION TESTING MACHINESPECIFICATION:-For conducting torsion and twist tests on various metal wires, tubes, sheet materials . Capacity-50kg-m Ranges- , 50, 25, 25 & 10 kg-m No. of division on dial- 500 Torsion speed & direction- Fixed Reverse Clearance between grips- 0-500mm Grips for round bar- 10-30mm Width- 40 mm Motor- 3 H.P.

TORSION TESTING MACHINESPECIFICATION:-For conducting torsion and twist tests on various metal wires, tubes, sheet materials . Capacity-50kg-m Ranges- , 50, 25, 25 & 10 kg-m No. of division on dial- 500 Torsion speed & direction- Fixed Reverse Clearance between grips- 0-500mm Grips for round bar- 10-30mm Width- 40 mm Motor- 3 H.P.

We own a well-maintained storage facility that helps us in meeting bulk and urgent requirements of the clients at a time. It is managed and maintained by the storekeepers. Founded in Delhi(India), our company has been successful in capturing the local and domestic markets as trader of this product Specification of 20 tonne universal testing machine It is based on the Constant hydraulic principle. The machine provide tension & compression test .load frame depend on the machine capacity. Middle slide is moving with the help of leading screw and upper slide is stile with help of two pillars. And lower slide up & down with help of hydraulic cylinder to control oil tank, pump and two wall & limit switch to auto stop. Pressure Tran juicer and sensor connected directly indicates the load & displacement (elongation) in Digital form in Newton and kg as we set and displacement show in mm. Middle slide traveling speed is 80mm _+ 5mm per min. lower slide traveling speed is 25mm _+2mm per min. measuring the load with help of hydraulic pressure

Charpy impact testing involves striking a standard notched specimen with a controlled weight pendulum swung from a set height. The standard Charpy-V notch specimen is 55mm long, 10mm square and has a 2mm deep notch with a tip radius of 0.25mm machined on one face. The specimen is supported at its two ends on an anvil and struck on the opposite face to the notch by the pendulum. The amount of energy absorbed in fracturing the test-piece is measured and this gives an indication of the notch toughness of the test material. The pendulum swings through during the test, the height of the swing being a measure of the amount of energy absorbed in fracturing the specimen. Conventionally, three specimens are tested at any one temperature and the results averaged. Charpy tests show whether a metal can be classified as being either brittle or ductile. This is particularly useful for ferritic steels that show a ductile to brittle transition with decreasing temperature. A brittle metal will absorb a small amount of energy when impact tested, a tough ductile metal absorbs a large amount of energy. The appearance of a fracture surface also gives information about the type of fracture that has occurred; a brittle fracture is bright and crystalline, a ductile fracture is dull and fibrous. The percentage crystallinity is determined by making a judgement of the amount of crystalline or brittle fracture on the surface of the broken specimen, and is a measure of the amount of brittle fracture.

We allow our patrons to make payment through a variety of methods. We are comfortable with patrons making payment through online or offline mediums that are legal and trusted. Situated in Delhi(India), the company has carved a niche for itself in the market with its flawless range of products.

 

Specification :

• Designed for conducting Izod & Charpy Test.
• Specs - charpy Test Izod Test
• Pendulum drop angle 140 deg. 85deg.
• Pend. Effective wt. 20.996kg 22.059kg
• Striking Velocity 5.3466m/sec 3.587m/sec
• Impact energy 300J 164J
• Min. scale graduation 2 J 2 J
• Distance of axis of P. Rot 825mm 825mm
• Max. permissible loss 0.5%. Striking edge angle 30 deg. 75 deg.
• Radius of Curvature 2.25mm 0.75mm
• Width 18mm