Our Products
We are leaders in the market for providing best range of Digital Thermometer Model, Dynemech Make Wedge Mounts, Rainforced PTFE Packing, SS Barell Pump and SRE-503 DRUM HANDLER Equipment
This instrument is a portable 3 digit, compact sized Digital Thermometer designed to use external K-type thermocouple as temperaturesensor. Temperature indication follows National Bureau of Standards and IEC 584 temperature / voltage tables for K type thermocouple.RTD Thermometer is mainly using for monitoring high-precision temperature and measuring scopes. The thermometer can displaychanges among the three units : Kelvin, Fahrenheit and Centigrade, and it also has memory, reading the MAX and MIN values function.
Weoffer Dynemech Make ANTI VIBRATION SHEETS made from high grade synthetic composite material. These sheets have different load capacities and are available in different natural frequencies to suit various industrial applications. These are resistant to water, oils, lubricating oils, fuels etc. used in the shop floor. Each sheet has defined stress value and can be placed directly under the machine as per the weight of the machine and no. of mounting positions. These plates will not deform plastically, if the weight of machine does not exceed maximum load value of the insulation plates. The available thicknesses are 2mm, 8mm, 15mm, 20mm, 25mm and 65mm.
Type | Load (Kg./Sq.cm.) |
Thks (mm.) |
Applications | |
Du | 3-9 | 15 | Tool room machine, plastic injection moulding machines, pressure die casting machines, printing and textile machine (For Machine having high axial forces). Coefficient of friction 0.9, natural frequency range 35Hz – 18 Hz | |
Dm | 5-10 | 15 | Lathe machines, milling machines, grinding machines, machining centers, turning centers etc. Coefficient of friction 0.7 natural frequency range 50 Hz-30 Hz. | |
Di | 5-14 | 25 | For machine with high vertical dynamic forces such as power presses, punching machines, stamping machines, shearing machines etc. Coefficient of friction 0.8, natural frequency range 25 Hz -7 Hz | |
Dp | 1-4 | 20 | Tuned to low natural frequency, suitable for passive vibration control of Measuring & Testing Machines, Grinders etc. Coefficient of frication 0.8, natural frequency 20 Hz-7 Hz. | |
Ds1 | 2.5-5 | 20 | Light weight presses, tool room machines, compressors etc, on ground floor as well as upper floors coefficient of friction 0.8, natural frequency range 35 Hz-15 Hz. | |
Ds2 | 2-8 | 25 | High vibration insulation for both active and passive range, medium presses, stamping machine, also well suited for high speed rotating machine on upper floors. Coefficient of friction 0.8, natural frequency range 35 Hz-8 Hz. | |
Dhs1 | 5-15 | 65 | Forging Hammers, Heavy Gen-Sets, Heavy Industrial Machines. Coefficient of friction 0.8, natural frequency range 25 Hz-8 Hz. | |
Dh | 10-35 | 15 | Very heavy and long bed machines, long machining centers, planners etc. Coefficient of friction 0.6, natural frequency range 70 Hz -45 Hz | |
Da1 | 2-18 | 2 | Anti- Skid Plate | |
Da2 | 2-10 | 8 | Anti- Skid Plate |
We supply the Dynemech Wedge Mounts are designed for industrial machinery that require precision levelling and vibration absorption. This three piece wedgemount has an adjustable bolt which moves the centre wedge between the top & bottom wedges. The movement of the center wedge provides precision height adjustment which can be used for machine leveling. Large supporting surface ensures solidity and rigidity.
All Wedge Mounts have a specialized elastomeric insulation plate at the bottom which provides vibration damping capabilities. These insulation plates are customized for damping different frequencies. All our Anti Vibration mounts have different vibration damping materials for precise machine vibration control. Different models of Anti Vibration Wedge Mounts are available depending on whether the machine needs to be:
Freely placed on the mounts (Series DF), Bolted to the mounts (Series DB), Bolted to the mounts and grouted to the floor (Series DT), Transmit load of the machine to the floor at 90 with very precise leveling (Series DTSP), Requires very high height adjustment range (Series DTH), A large centered hole instead of two eccentric hole with offset adjustable bolt to accommodate a bigger size bolt (Series DTO)
Vibration reduction is possible through assembling respective Dynemech insulation plates. These Anti Vibration mounts are suitable for heavy CNC machines and Power Presses as these mounts can take large loads and provide levelling adjustment. The Anti Vibration mounts have large surface area for maximum coverage under machine body and provide maximum support to machine during levelling.
We supply teflon coated rubber diaphragms for dispensing pumps, vacuum pumps and compressors, conveying pumps, brakes systems, exhaust gas re-circulation valves, hydro mounts, other automotive valves, bladders, accumulators, valve actuators, closing valves, other industrial valves, regulator valves (short stroke), (medium stroke), (long stroke) etc.
Roto-Moulded Pallets offers truecombination of Static, Dynamic &Racking load as per therequirements of different customers.
High Load Bearing capacities No Deflections while carryingStatic Load : as per your requirement
Dynamic Load : as per your requirement
2 way & 4 Way both are available
Size: as per your requirement
Cleaning can be done till its lastparticle with a single sweep by usingwaater, steam, chemicals & air blowmaintaining 100% hygiene.
DYNEMECH MACHINERY RAISER DAMPING BLOCKS offer easy and quick installation of CNC machines. These blocks offer both levelling and vibration damping besides raising height of the machine for proper cleaning and repairing under it. Raiser Damping Blocks are assembled with insulation plates for vibration reduction. They provide fast and easy installation, flexible shop floor plan, enhanced component finish/part tolerance, extended tool and machinery life, improved health protection, better structural safety. Ideal for CNC Turning/Machining Centres, Cylindrical & Centreless Grinding Machines, Precision Machine Tools. Help implement TQM norms for machine installation. Proper maintenance, cleanliness, vibration reduction results in enhanced machine tool reliability (zero breakdowns), reduced operation and life cycle costs which are the driving factors for adoption of Total Productive Maintenance (TPM) practices. Machines are installed at a height of 100-150 mm which help implement TPM norms for machine installation as recommended by IMTMA.
MACHINERY RAISER DAMPING BLOCKS, Series DRCSeries DRC are suitable for machines having plain hole in the base. Levelling is done by turning the bolt which lifts the cover plate along with the machine. Available both in 150 &100 mm height.
SS Classic Hand Dryer offered are made available by us with drying time of 20 Sec, operating velocity of 11 M/S, dimensions of 265X170X100 as well as working wattage of 750 watts. These are backed by latest technology support and feature use of stainless steel outside body finish which provides for smooth shining surface as well as years of consistent usage values. Coming with long-service life based motors as well as energy saving abilities, these can be also adjusted for different air blowing speeds as well as temperature and usage requirements as per the demands of particular facilities where tehse are installed.
Drying Time | 20 Sec |
Velocity | 11 M/S |
Dimension | 265X170X100 |
Wattage | 750 watts |
pallet trucks are the efficient and simple mode of transporting palletized loads on the shop floor. Available in both manual and electric operated versions, pallet trucks come in different variants to suit desired applications. Maini's floor transportation range enables effortless transfer of heavy loads in your shop floors and warehouses. This range includes the quintessential electric pallet trucks and electric platform trucks, designed to enhance productivity, ensure safety and optimize returns. Streamlined design and small turning radius make it ideal for operating in narrow passageways. Ease of maintenance makes it your best choice for the long run.
Additional Information:
Payment Terms :
Delivery Time : 2-3 weeks
This Drum Lifter is composed of hydraulic system, main body, Drum holding device and tilter. The Frame work is welded of high quality swage. This Drum Lifter lifts drum with manual hydraulic jack and hauls loads by hand. The hydraulic gear is equipped with return valve and foot pedal to control drum carriage lowering rate and ensure the hydraulic action accurate and reliable. To Pull or push the Drum Lifter manually to place the Drum to required place. When need rotating the Drum brake the rear wheels to avoid moving Lifter. Keep on lifting to required height, turn the handle so that Drum can rotate. You have our assurance of the best technical expertise with meticulous attention to all aspects of product quality to your satisfaction. Our Hydraulic units are leakproof +with special wear resistant seals. The ram & Plunger are ground & HARD CHROME plated to avoid friction & rusting particularly while working out doors.
Model No. |
SRE-504 |
Capacity | 350 Kgs. |
Lifting Height | 1425 mm. |
Overall Length | 1190 mm. |
Overall Width | 890 mm. |
Overall Height | 2020 mm. |
Net Weight | 155 Kg. |
Drum Handler: Capacity: To Lift, Shift, Tilt, rolls & Emptying purpose Std. 210Ltrs. M.S. Drum.Discharge Height: 16 Inch. Approx.Structure: Will made from Various Dia. M.S. Pipe & M.S. Flat.Wheel: 2 Nos. 10 X 2 Size & 2 nos. 6 X 2 SizeWheels with doubel ball bearings. 4 Nos. Wheels for, rotating purpose ofM.S.Drum.
Wire mesh is primarily used as industrial filters in the application of filters, strainers, baskets, sieves and separator. Wire meshes are available in the below materials.
Wire meshes MaterialWire Mesh are readily available in the form of rolls, cut piece, round discs and can also be customized as per requirement. Plain weave, Twilled weave, Plain Dutch Weave & Twilled Dutch Weave are the different types of weave.
We supply premium qualityMoulded Rubber Productssuch as, Diaphragm, Conductive Pads, etc. Our products are made of the finest quality rubber and other raw materials, ensuring good elasticity and flexibility. All products are made by our competent team as per the customers needs. We are able to deliver flawlessMoulded Rubber Productsin the market. Our products carry several features such as, wear resistance, durability and cost-effectiveness.
Features:
Made from High Impact Polystyrene, these drawercontainers are ideal for storing hardware andstandard parts inside drawers of tool cabinets
These drawer containers are available in 6 sizes.
These drawer containers when positioned, inside the standard tool cabinet drawers make easy and well defined compartments for each type of part stored in them.
These drawer containers being modular help in organizing the drawers of tool cabinets to store different parts very easy.
Each Container has a label holder which permit the insertion of labels for easy part identification.
These containers are individually removable if required in the drawer.
These containers are available in blue colour only.
We supply the Dynemech Rubber Air Springs are designed for industrial machinery for controlling passive vibrations. These mounts remove all unwanted vibrations creeping into sensitive laboratory equipment and machinery. These mounts are suitable for both active and passive vibration control.
Machines mounted on Air Springs not requiring any precision levelling (Series DRAS), Machines mounted on Air Springs requiring precision Auto-Levelling (Series DLPM).
Dynemech air springs make very low natural frequencies possible, from 0.5 to 6.0 Hz depending on the type. With loads ranging from 25Kg to more than 6500 Kg, Dynemech air isolators provide effective mounts for sensitive measuring instruments as well as heavy foundations.
Dynemech Leveling Elements are ideal for vibration absorption along with leveling accuracy. These resilient elastomeric units boast of rugged construction , simple installation and leveling flexibility even on uneven floors. These damping cushions also provide anti slip- high friction grip to prevent machine walking. Best protection against structure borne noise.
Dynemech Machine Base Mounts for light to medium weight machines (Series-SL)Dynemech Texl Foot Machine Mounts for bolting option and rugged construction (Series-DTXL)Dynemech Jackup Mounts for multitude of leveling problems (Series-DJM)
Dynemech Systems has a range of Anti Vibration Mountings suitable for various applications for both compression and shear applications.
Dynemech STUDMOUNTS (Silent Blocks) for various applications(Series DS), Dynemech FlexiFoot (Cushy-Float) for Generators, Blowers(Series DGF), Compac Machinery Mounts (Series DH), Dynemech Horizontal Stops for damping horizontal vibrations (Series DHS).Dynemech Sandwich Mounts for supporting very high axial loads(Series DMS).
TPM Series Mounts have a height of 100mm/150 mm (as per client requirement) at mean position to help proper cleaning and repairing under the machine as per TPM guidelines for machine installation by IMTMA.
All TPM Series Mounts have a specialized Anti-vibration elastomeric insulation plate at the bottom which provides vibration reduction. Different models of TPM Series Mounts are available depending on machine to be installed.
Wedge Mounts Free Standing and levelling adjustment is available (Series DFP), Wedge Mounts Bolted to Machine and levelling adjustment is available (Series DBP), Wedge Mounts Bolted to Machine and anchored to ground with levelling adjustment (Series DTP), Circular Mounts suitable for machines having plain hole in the base and requiring levelling adjustment (Series DRC), Circular Mounts for machines having tapped hole in the base with bolt resting on the top face of our mount (Series DR).
The Stairway tower is the ideal for safe and ergonomically working at height. Thanks for the specially designed stairways it is an easily accessible tower and very user friendly when working with tools or other equipment
This scaffold is the most useful ascending aid for activities involving frequent ascend/ descend and transport of loads. Stairway rails add to the all round safety. No tools required, Spacing of platforms every 2 meters (Optional) ease is assembling or dismantling of the tower. Ribbed rung tubing for increased grip.
Four stabilizers are further connected to the unit: spring loaded clamp assembly connects them to the H frames to give a better stability required forthe structure.
WHEELSThe wheel and brake unit consists of adjustable nut placed on thrust bearing to take axial thrust. The wheel has been fitted with radial bearing. When the mounting surface is uneven the adjustable nut is used forthe alignment. The lever is provided to release or apply brakes.
PLATFORMSThe Aluminium platform is made up of rectangular sections framed and welded to the checkered plate with ends consisting of claws. The platform could be placed on the frames depending on working height as per requirement.
WeOffers a single-width folding tower which is particularly suited to work indoors. It has base measured of 750mmx1800mm
Wealso offers a double-width folding tower which is suited to work indoor and outdoor. It as base measurement of with 1400mm and legth of 1800mm, 2000mm and 2500mm
In addition to all the advantages offered by the scaffolds, the folding scafforld with extension frame assembly provides even more advantages in use and in safe ascent/descent and access. The extension assembly is quick and easy to install. working 3.80m.
We supply a supreme qualityRubber Expansion Joints. The offered rubber expansion joint are designed using quality assured of material.
Features:
Applications:
We supplya wide range of quality transparent rubber tube, silicon rubber tubing, transparent rubber tubing that provide non-toxic, non-leading and pyrogen free service temperature. Available in different sizes and thickness with in accurate dimensions, excellent finish and consistent physical properties.
Salient Features :Strong ribs provided for optional dividers to increase storage options.
Full length rear lip supports provided for hanging bins on louvre panels or rails.
Reinforced ribs adds strength and avoids spreading.
Extra wide stacking base for secure stacking.
Extra wide label slot for easy content identification.
Stopper prevents stacked bins from shifting forward.
We supply silicon rubber Cap / Seal which provides a cost-effective method for the dust-tight transfer or containment of powders.
By cutting a hole in the center of the cap, a dust-tight seal can be made with the penetrating spigot. This enables the contained charging of mills, tablet presses, vessels, drums / IBCs and almost any other item of process equipment where charging / discharging can produce dust. After the charging process is complete, the cap (with hole) can be replaced with a cap (without hole), to seal off the inlet.
Transparent Platinum Cured Nylon Braided Silicon Hose Pipe with Both Sides TC End Connection
Standard Construction Hose has a 70 Sh natural translucent silicon rubber inner hose, rubber silicon hose, a braided polyester mulch-filament yarn or fiberglass reinforced a 70 sh A Silicone rubber coating (natural translucent). Suitable for continuous operation at temperature from -600 C to 1500 C and for intermittent exposure upto 1800 C . No harmful toxic or physiological effects. Chemically extremely stable and suitable for use with many acids and alkalies. Resistant to ozone. UV to ozone and corona discharge.
Typical ApplicationsAlternative Constructions available subject to minimum order