Laboratory Equipments #1114798

A powerful permanent magnetic type base holds firmly to any steel or iron surface, horizontally, vertically or up side down, thus eliminating time spent on clamping indicator to machine. When magnet is turned ‘ON ‘ by the lever, the base and two sides are energized for attachment on flat surfaces and a ‘ V ‘ slot facilitates gripping of the cylindrical shafts.

Salient Features :Accepts all unique dial indicator stem.‘ ON ‘ & ‘ OFF ‘ lever releases the magnetic base from the work piece without damaging the surface.

Specifications :

• Base - 50 * 50 * 60 mm
• Main Cloumn - 12.5 mm O.D. 175 mm L
• Extersion ARM - 8 mm * 150 mm L magnetic
• Pull - 80 kg (175 lbs)

This Base is similar to KM - 525 in dimensions but a special feature provided in this model is this fine attachment assembly fitted on extension arm 10 mm diameter and 175 mm length for quick setting of dial indicator at a desired position.

 

Specifications :

• Base - 50 * 50 * 60 mm
• Main Cloumn - 12.5 mm O.D. 175 mm L
• Extersion ARM - 8 mm * 150 mm L magnetic
• Pull - 80 kg (175 lbs)

A powerful permanent magnetic type base holds to any steel or iron surface - horizontally, vertically or up side down, thus eliminating time spent on clamping indicator to machine. When magnet is turned 'ON' by the knob, the base remains firmly clamped in any desired position. The base and two sided energized for attachment on flat surfaces and a 'V slot facilitates gripping of the stand of shafts with a diameter range of 20 to 120 mm. The unique clamping which can hold dial indicator 8 mm or 5/16" stem diameter simple and quick setting is obtained by a new clamping of the extension arm, which guarantees absolutely rigid clamping even with moderate tightening.

Specifications :

• Height - 275 mm
• Length Of Base - 73 mm
• Width Of Base - 50 mm
• Height Of Base - 64 mm
• Magnetic Pull - 100 kg

This Base is similar to KM- 5250 in dimensions but the special feature provided in this model is a fine attachment assembly fitted on extension arm 10 mm diameter and 175 mm length for quick setting of dial indicator at a desired position.

Salient Features :Accepts all unique dial indicator stem ‘ON‘&‘OFF‘ lever releases the magnetic base from the work piece without damaging the surface.

Specifications :

• Base - L60 x W50 x H55 mm
• Main Cloumn - Dia12mm x L175 mm
• Extersion ARM - Dia 10mm x L150 mm
• Magnetic Pull - 80 kg (175 lbs)

Small bodied square in shape of a magnetic base with a “ V “ which permits use on round or flat surface, can easily be mounted on machine tools orwork surfaces, with greater magnetic pull and quickly released by a simple leverage. Supplied with two rods namely, one for standard dial gauges and dial test indictors and other for standard. Machine shop clamps with a step of 5 / 16 “& 7 / 32 “at the ends.

SRD - 96 :

• Similar to SRD - 95 but it is having Fine Adjustment
• for rapid setting indicators to desired readings.

Special Ball Joint Base

• SRD - 95 and SRD - 96B Dimensions are same as SRD - 95 and SRD - 96. But the pillar is provided with Bolt and Socket Joint Action.

 

Specifications :

• Base - 1.1/ 4” * 1.1 / 4 * 1.5 / 16”
• Column - 5 /16” Dia* 4” Height
• Magnetic Pull - 25 kg (50 lbs.)

The instrument is mainly used on machine tools for checking true running on iron plates, surface plates as well as for general checking operations. The base can also be used as a Magnetic - V - Block to hold arbor checking tapers and parallelism.

Salient Features :Can be used as a Magnetic Stand as well as a Magnetic V-Block. Proper clamping can be done by use of large knobs. Dial clamping dia is 5/16" or 8 mm. A small setting screw is provided for fine adjustment.
A powerful magnet is in the base. On/Off switch is provided on the magnetic base. The base has four adhesion faces and V - groove for mounting arbors ranging 20 dia to 150 dia.

Specifications :

• L x W x H of Base - 65 x 56 x 70 mm
• Main Column - 18 x 200 mm
• Extension ARM - 18 x 220 mm
• Magnetic Pull - 90Kg

This is one of our innovative technologies. As per the customers’ requirement, we have designed the base to help measure longer distances. The very powerful magnet is switched on by means of a turning switch. The stand will stay in any position that the stand can be used on flat surfaces. An extra heavy-duty base is used to withstand rough working surfaces and last really long.

This model utilizes a heavy base unit and the massive rigid fittings make it suitable for use with larger dial gauges. A fine adjustment screw is provided and maximum magnetic performance gives security even on rough surfaces. The base and two sides are energized for attachment to flat surfaces and a 'V slot facilitates gripping on curved surfaces. Universal movement of crossbar is controlled by one screw.

Specifications :

• Height of column - 230 mm
• Diameter of column - 22 mm
• Length of base - 63 mm
• Width of base - 63 mm
• Height of base - 75 mm
• Magnetic pull - 90 Kg

A model range 3 - D measurement, articulated stand with unlimited adjustment. A mechanical central clamping system with one lock mechanism (All joint locks). Maintenance free and has micro fine adjustment for dial gauges and feelers. A well - planned model, guarantees individual field of application.

Specifications :

• L x W x H - 60X50X55
• ARM Length - 300MM

A unique combination of Surface Gauge with rigid Permanent Magnetic Base, holds indicator firmly to any iron and steel face. The lifting lever releases the base from its firm holding.
Main pillar adjusted quickly and locks firmly to any desired angle above or below base. The fine adjustment by knurled thumbscrew makes it possible to obtain quick and accurate setting. Provision is made for indicator holding and Scriber attachment.

Specifications :

• Main Pillar O.d - 5/16 “* 9“l, 8mm * 225mm
• L*w * H Of Base - 80 * 62 * 35mm
• Magnetic Pull - 25kg

This is a universal stand with a permanent magnetic base used for easy application of dial test indictors.

Specifications :

• Base Diameter - 38 mm
• Total Height - 75 Mm
• Magnetic Pull - 10 Kg

This is a compact universal permanent magnetic stand. It’s medium size and exceptional magnetic pull makes easy application of dial test indicator and dial inductor to machine tools for the purpose of setting and checking work pieces

.

SALIENT FEATURES

Can hold plunger as well as lever type dial indicator. Guaranteed magnetic pull to permanent magnet.Easy locking device to lock gauges.With little leverage base can be taken over from iron surface.

Specifications are same as SRD-100. But it is provided with Fine Attachment Screw for accurate final setting of the indicator dial. It has Magnetic Pull of 50 lbs.

 

Medium duty rectangular shape magnetic base with powerful magnetic pull and a quick release lever with ‘V ‘ shape at the bottom which facilitates easy mounting on a machine tool or work surface. Exclusive fingertip release tilts unit away from work for easy removal.
Supplied with two rods, one to hold standard dial gauges and dial test indicators 1 / 4 “ in diameter and other multi step rod 1 / 4 “ dia with 5 / 6: O.D. at one end and 7 / 32 “ O.D. at the other end for use with standard machine shop clamps.

 

Specifications :

• Base - 1.1 / 8” * 1.1 / 8” * 3. 3 / 4”
• Column - 5 /16” Dia* 4” Height
• Magnetic Pull - 30 kg (50 lbs.)

A model range 3 - D measurement, articulated stand with unlimited adjustment. A mechanical central clamping system with one lock mechanism (All joint locks). Maintenance free and has micro fine adjustment for dial gauges and feelers. A well - planned model, guarantees individual field of application.

Specifications :

• L x W x H - 75X50X65
• ARM Length - 390MM

A powerful permanent magnetic type base holds firmly to any steel or iron surface, horizontally, vertically or up side down, thus eliminating time spent on clamping indicator to machine. When the magnet is turned ‘ON ‘by the lever, the base and two sides are energized for attachment on flat surfaces and a ‘V ‘slot facilitates gripping of the cylindrical shafts.

 

Salient Features :Accepts all unique dial indicator stem ‘ON‘&‘OFF‘ lever releases the magnetic base from the work piece without damaging the surface.

 

Specifications :

• Base - L60 x W50 x H55 mm
• Main Cloumn - Dia12mm x L175 mm
• Extersion ARM - Dia 10mm x L150 mm
• Magnetic Pull - 80 kg (175 lbs)

This is one of our innovative technologies. As per the customers’ requirement, we have designed the base to help measure longer distances. The very powerful magnet is switched on by means of a turning switch. The stand will stay in any position that the stand can be used on flat surfaces. An extra heavy-duty base is used to withstand rough working surfaces and last really long.

Specifications :

• Length of Base - 120 mm
• Width of Base - 55 mm
• Height of Base - 60 mm
• Height of Column - 600 mm
• Diameter of Column - 18 mm
• Extension Arm - 530 mm
• Magnetic Pull - 150 Kg

By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. The assistance of our experienced quality analyst guarantees us that we make use of quality raw materials for the production of our entire range. Therefore, our buyers enjoy flawless products.