Our Products
Our offered Product range includes HARDENED VEE BLOCKS, Roller Bearing V Block, SH-455 & SH-456 Hardened V Blocks, MAGNETIC V - BLOCK SPECIAL FOR BORING BAR and V- BLOCK HARDENED (UNIVERSAL) (with clamp).
These hardened vee blocks come with these special inbuilt features:
V blocks are hardened and ground to 60+2 HRC
Precision V Blocks for Tool Room, Inspection Work, Assembly Shop, Marking
All sides precision ground, parallel and square
V groove ground central and parallel 2 sides and base perfect aligned in matched pair
Supplied with special clamp for holding job
Hold square and round work
Cat No. Size Range
SH- 455 [4”v-b] 175 * 100 * 65 mm 5-125 mm
SH- 456 [5”v-b] 200 * 125 * 75 mm 5-150 mm
ROLLER BEARING V BLOCK
Used for checking heavy and odd shaped round jobs.
Perfectly matched pair having accuracy 0.005 mm
Included angle of rollers is 90
Standard bearings are used which are replaceable
Jobs dont get damaged due to bearing on top
SPECIFICATIONS:
Cat No. Sizes mm. Range mm. Load
Lx W x H Capacity Kg
SH - 888 150 x 60 x 100 Æ3 - Æ 55 1,000
We are identified as one of the commendable names in the market offering SH-455 & SH-456 Hardened V Blocks at affordable prices. Only high quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement. These hardened vee blocks come with these special inbuilt.
Features :‘V’ blocks are hardened and ground to 60+2 HRC Precision ‘V’ Blocks for Tool Room, Inspection Work, Assembly Shop, Marking All sides precision ground, parallel and square ‘V’ groove ground central and parallel 2 sides and base perfect aligned in matched pair Supplied with special clamp for holding job Hold square and round work.
Specifications
Cat No. | Sizes | Range |
---|---|---|
SH-455[4”v-b] | 175*100*65mm | 5-125 mm |
SH-456[5”v-b] | 200*125*75mm | 5-150 mm |
These Boring tool devices are used to set boring tool to the exact diameter on boring machines and machine tools with rotation boring tools. Because of their magnetic bases, they can be held directly on boring spindle. The clamps can fit at any desired position whereby any particular bore size can be set on the device. These devices have ON / OFF switches, as per requirements and aid in holding the job on boring spindle. The V slot is ground to 5micron accuracy.
CAT. NO. SIZE [L W H] CLAMPING RANGE DIA. IN MM
[Without ON / OFF switch]
KM - BSD - 201 70 * 22 * 40 mm 10 TO 60
KM - BSD - 202 75 * 22 * 50 mm 10 TO 85
[With ON / OFF switch]
KM - BSD - 203 50 * 28 * 60 mm 10 TO 50
KM - BSD - 204 60 * 30 * 60 mm 10 TO 60
KM - BSD - 205 65 * 35 * 60 mm 10 TO 70
KM - BSD - 206 75 * 35 * 70 mm 10 TO 90
KM - BSD - 207 70 * 40 * 60 mm 15 TO 105
KM - BSD - 208 90 * 40 * 70 mm 15 TO 120
KM - BSD - 209 120 * 40 * 90 mm 15 TO 150
V BLOCK HARDENED (UNIVERSAL) (with clamp) SH - 447
Hardened and ground on all working surfaces to an accuracy within 0.005 mm.
We are a trusted name in the industry, serving the customers from our base in Maharashtra(India). We are staffed with a team of deft professionals who diligently furnish varied requirements of the clients and ensure qualitative packaging of the placed orders.
Specifications
Cat. No. | SH - 447 |
---|---|
Clamping Range | 5 - 50mm |
L*W*H | 70*50*60mm |
These ‘V' Blocks have two ‘V’ angles of different sizes to take jobs of different measurements. The clamps help the work to be held rigidly to the ‘V’ block. The top ‘V’ and the bottom ‘V’ are parallels with ± 3 micron and its square ness to the end faces and the height variation to the ‘V’ Block in pair is within ± 3 microns.
Specifications
Cat No. | Sizes | Clamping Range |
---|---|---|
SH - 451 | 63*40*40 mm | 3 - 25 mm |
Used for checking heavy and odd shaped round jobs.
Perfectly matched pair having accuracy 0.005 mm
Included angle of rollers is 90
Standard bearings are used which are replaceable
Jobs dont get damaged due to bearing on top
The V Blocks have two V angles of different size to take parts of varying dimensions.
By means of the clamp the Work can be held tight in the block. The accuracy of the vee block/100mm is within 0.005 mm.
MRM – 475, 475 H, 575, 575H, 676, 676H, 856, 856H, 876, 876H, 976, 976H
These ‘V' Blocks have two ‘V’ angles of different sizes to take jobs of different measurements. The clamps help the work to be held rigidly to the ‘V’ block. The top ‘V’ and the bottom ‘V’ are parallels with ± 3 micron and its square ness to the end faces and the height variation to the ‘V’ Block in pair is within ± 3 microns.
Specifications
Cat No. | Sizes | Clamping Range |
---|---|---|
SH – 454 | 150*100*100 mm | 5 - 85 mm |
These Magnetic Vee blocks are invaluable and versatile in tool making and inspection, in quality control and tool room. Due to their extremely high magnetic power they can be used for drilling and grinding (both wet and dry) and even for light milling work.
The - Blocks have a total of three magnetic surfaces. Top and bottom each with 90-degree v angle and end surface opposite from switch. All three magnetic surfaces as well as the two sides are carefully ground. Their accuracy for flatness, parallelism and square ness is within 0.005 mm or 0.0002 inches for all work, which requires accurate positioning.
When turned ON all three magnetic surfaces are activated simultaneously. The permanent magnet holds the work firmly in the V and the block holds itself firmly on a ferrous surface. Coolants or other fluids cannot damage the magnetic system, being shielded from penetration of moisture.
CAT NO. SIZE CLAMPING MAGNETIC
CAPACITY EFFICIENCY
MRM – 475 55 * 50 * 60 mm 5 – 35 mm 50 kg
MRM – 475 H 55 * 50 * 60 mm 5 – 35 mm 50 kg
MRM – 576 75 * 65 * 85 mm 5 – 55 mm 75 kg
MRM – 576 H 75 * 65 * 85 mm 5 – 55 mm 75 kg
MRM – 676 100 * 75 * 95 mm 5 – 65 mm 150 kg
MRM – 676 H 100 * 75 * 95 mm 5 – 65 mm 150 kg
MRM – 856 150 * 85 * 100 mm 8 – 80 mm 250 kg
MRM – 856 H 150 * 85 * 100 mm 8 – 80 mm 250 kg
MRM – 876 150 * 125 * 125 mm 10 – 120 mm 350 kg
MRM – 876 H 150 * 125 * 125 mm 10 – 120 mm 350 kg
MRM – 976 200 * 150 * 150 mm 10 – 150 mm 450 kg
MRM – 976 H 200 * 150 * 150 mm 10 – 150 mm 450 kg
These ‘V' Blocks have two ‘V’ angles of different sizes to take jobs of different measurements. The clamps help the work to be held rigidly to the ‘V’ block. The top ‘V’ and the bottom ‘V’ are parallels with ± 3 micron and its square ness to the end faces and the height variation to the ‘V’ Block in pair is within ± 3 microns.
Specifications
Cat No. | Sizes | Clamping Range |
---|---|---|
SH – 453 | 107*75*75 mm | 5 - 65 mm |
These ‘V' Blocks have two ‘V’ angles of different sizes to take jobs of different measurements. The clamps help the work to be held rigidly to the ‘V’ block. The top ‘V’ and the bottom ‘V’ are parallels with ± 3 micron and its square ness to the end faces and the height variation to the ‘V’ Block in pair is within ± 3 microns.
Specifications
Cat No. | Sizes | Clamping Range |
---|---|---|
SH - 452 | 80*57*57 mm | 5 - 50 mm |