shreenath industries

Sardar Patel Ring Road, Ahmedabad, Gujarat

Separators are designed for heavy duty large volume liquid and semi-liquid line flow system. The T - Trap employs a slip in cage of stainless steel permanent m magnet tubes. The function of the magnet tubes is such that the captured tramp metal particles migrate to the rear of the tubes where they remain protected from wash-off until the tubes are cleaned. The magnet cage has positioning lugs that mate with locating recesses in the body of the tramp. Having a top access bolt on steel plate and seal, the T-Tramp is easy to clean. With the top removed the magnet cage is simply lifted out, Wiped clean and reinstalled.

Thepermanent MagneticDrum consists of stationery permanent Magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumferences as shown in fig

Drum shell made of non magnetic stainless steel revolves around the magnetic filed. As the material fed evenly from the chute falls over the drum , powerful magnetic, field attract & holds ferrous particles to the revolving shell. As the revolving shell carries the iron particles through the stationery magnetic field, the non magnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of magnetic field
The strength of thepermanent magneticdrum is guaranteed to be greater than corresponding electromagnetic Drum.The permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through out the life of the installation.

Size Range:
The Permanent Drum Separators are available in standard drum diameters of 300 mm. 400 mm, 450 mm, 500 mm, 600 mm, 800 mm Drum width range from 300 mm to 1500 mm. Other sizes can be made as special to your requirement. the larger the diameter and width of the drum the greater is the volume of material which can be handled

Magnetic Materials :
Magnetic separators are offered with two different type of magnets:

Ferrite Magnet:
The magnetic separator with ceramic magnet are useful for the application where free and larger iron particles are to be separated. The average magnetic intensity on the magnetic drum surface will be 1500-2000 Gauss.

Rare Earth Magnet :
The magnetic separator with high intensity Rare Earth Nd-Fe-B (Neodymium- Iron- Boron) magnets are useful for removing magnetic contamination with low magnetic properties and fine iron particles are to be separated. The average magnetic intensity on the drum surface will be 3500 - 5500 Gauss.

Working Principal & Magnetic System :

Thepermanent MagneticDrum consists of stationery permanent Magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumferences as shown in fig. Drum shell made of non magnetic stainless steel revolves around the magnetic filed. As the material fed evenly from the chute falls over the drum , powerful magnetic, field attract & holds ferrous particles to the revolving shell. As the revolving shell carries the iron particles through the stationery magnetic field, the non magnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of magnetic field. The strength of thepermanent Magneticdrum is guaranteed to be greater than corresponding electromagnetic Drum . Thepermanent Magneticused are everlasting magnets and its strength does not diminish during normal use and can be used through out the life of the installation. SizeRange:The Permanent Drum Separators are available in standard drum diameters of 300 mm. 400 mm, 450 mm, 500 mm, 600 mm, 800 mm Drum width range from 300 mm to 1500 mm. Other sizes can be made as special to your requirement. the larger the diameter and width of the drum the greater is the volume of material which can be handled. Magnetic Materials :Magnetic separators are offered with two different type of magnets. Ferrite Magnet :The magnetic separator with ceramic magnet are useful for the application where free and larger iron particles are to be separated. The average magnetic intensity on the magnetic drum surface will be 1500-2000 Gauss. Rare Earth Magnet :The magnetic separator with high intensity Rare Earth Nd-Fe-B (Neodymium- Iron- Boron) magnets are useful for removing magnetic contamination with low magnetic properties and fine iron particles are to be separated. The average magnetic intensity on the drum surface will be 3500 - 5500 Gauss.

Roll Crusher

A very heavy construction, very hard surface of alloy steel to crush materials like, Emery, Glass, Quartz, Ceramic in granule form or a coarse powder. Even two stage crushing is possible to get fine powder.

A specially designed hammer mill with cyclone and dust collector & dust collector system. to suit spice & like materials. Fineness may be changed of screen.

Themagnetic Drum pulleyreplaces the drive pulley at the end of conveyor belts. In view of the wide variety of conveyor belt types, the drum pulley are supplied made to measure and ready for installation. As the figure clearly show, the magnetic head roller extracts the iron particles from the material flow and carries them to the underside of the belt where they are removed and collected. Head roller magnets for conveyor belt are supplied in permanent magnets.

The version with permanent magnets are fitted with powerful and An-IsotropicHard ferrite Magnets /high intensity Rare Earth Nd-Fe-B Magnetsand operate without the need for power supplies. The magnet system is available in two types: with Longitudinal polar field distribution for use with low levels of iron contamination and thin material layers, and with lateral polar field distribution for greater material thickness and larger iron particles.

SHREENATHVibratory motors are Robust, Reliable, High Loadable Quiet Running and require no maintenance. SHREENATHVibratory motorsare totally enclosed 3 Phase, Squirrel cage induction motors with adjustable, eccentric weights mounted at both the ends of the shaft, to set up vibrations during rotation. The design of shaft and the selection of bearings has been carefully done to withstand heavy radial loads.

APPLICATIONThese motors are used in various material handling equipments such as vibrating screens, conveyors, and feeder. They are also used on hoppers, silos to prevent congestion of material flow. Foundry shake - outs and compacting machines use these motors for fast and efficient operation.

SHREENATH'T-Trap Magnetic' Separators are designed for heavy duty large volume liquid and semi-liquid line flow system. The T - Trap employs a slip in cage of stainless steel permanent m magnet tubes. The function of the magnet tubes is such that the captured tramp metal particles migrate to the rear of the tubes where they remain protected from wash-off until the tubes are cleaned.

The magnet cage has positioning lugs that mate with locating recesses in the body of the tramp. Having a top access bolt on steel plate and seal, the T-Tramp is easy to clean. With the top removed the magnet cage is simply lifted out, Wiped clean and reinstalled. Available in 7 standard line sizes from 2 to 18 inches in diameter, T-Traps can also be produced to meet special applications.