The Ribbon Vacuum Mixer Dryer operates at low temperature efficiently under vacuum. It is used for raw materials drying and mixing powder or granules of Pharmaceutical Materials, Crystalline, Insecticides, Pesticides, and Food industry and heat sensitive products. The Ribbon Vacuum Mixer Dryer cannot operate at low Temperature easily as it gets oxidized and is poisonous by nature. The Ribbon Vacuum Mixer Dryer is specially designed with a Double Helical Ribbon Agitator type blade by rigid fabricated structure motor, gear box which consists of a jacketed cylindrical shell with rotator.

During the rotation of the stirrer, there is provision for application of vacuum inside the shell and circulation of heating media in the jacket. As the product gently moving while the ribbon stirrer rotates, the large heating surface area presented by the internals of the cylindrical shell ensures uniform drying of the product. A fresh layer comes into contact with the indirectly heated walls of the shell when the diffusive action is induced by the mixing stirrer constantly. A well designed sealing system ensures positive circulation of a heating media in the jacket and also enables maintenance of deep vacuum inside the shell.

Optional Features :

• Option for two type designed of shell 1. Cylindrical type and 2."U" shape.
• Option for Flame Proof Electrical.
• Option for Automatic Charging.
• Option for lump breaker.
• Option for condenser, Receiver & Cyclone for solvent recovery.
• Option for advance PLC Controls with HMI touch screen.

Safety Features :

• Temperature controls, Vacuum relief Valve, Over load protection and Emergency stop.

salient Features :

• Design is cGMP- Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Continuous rotation of ribbon blade, material will make continuous movement motion in the container and reach to uniform mixing and drying at low temperature
• Dust free operation.
• High vacuum operation
• Fast and uniform homogeneous mixing & draying at low temperature.
• Solvent recovery
• Continues vacuum maintain during process.
• Very low value of final moisture even at low drying temperatures.
• Option for two type design of shell 1. Cylindrical type and 2. "U" shape.
• Continues vacuum maintenance during process.
• Vacuumized closed system with condenser, Receiver for solvent recovery & Cyclone separator to recovery the solid particle.
• Rapid & Complete discharge / Zero holdup after discharge
• Heating media can be used steam/ hot water / hot oil.

Blenders are used for mixing, lubricating and blending in Pharmaceutical, Nutraceutical, Food, Chemical, cosmetics, ceramics, pesticide, plastics and other Allied industries.

The Double shape blenders have long two corner of product container for more rubbing and tumbler effect to the material for fast and homogenizing mixing. It can perform homogenously dry mixing of free flowing powders, granules requiring low shearing force, Mixing and Blending of particles with rapid intermixing of particles irrespective of varying specific gravities. The material is loaded into the double cone blender drum. The double blender is tumbles the material in the container and spread out. The mixing is achieved in 5 to 15 minutes with better homogeneity.

salient Features :

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All Product contact parts AISI 316 & non contact parts AISI 304.
• Double Cone shape product container for Ideal dry mixer for lubrication of granules and homogenization mixing of multiple batches in to single batch.
• Available Capacity model in octagonal blender 25 kg to 2500 kg batch size.
• Enclosed rigid drive with reduction gear box and motor.
• "A" type rigid structure of the machine with two sides resting of product container.
• Product container having discharge with butterfly valve and man hole.
• Charging hole with hinged lid with seal for charging and cleaning.
• The product container rotates on sped 8 RPM.
• Safety reeling provided for rotating area of product container.
• Fixed baffles provided for lumps braking.
• Electric controls panel with cycle time.

Optional Features :

• Charging Option:
  • Loading & Unloading by Product container with Jacking trolley.
  • Vacuum conveying system.
  • Bin loading by hydraulic hoist.
• Rotary Intensifier with AC variable drive.
• AC Frequency variable drive for product container.
• PLC Controls with HMI touch screen,
• Flame proof motor and Push Button station.
• Inline milling and loading with vacuum transfer systems.

Safety Features :

• Safety reeling with limit switch.
• Overload protection and emergency stop.

Drum/ Barrel mixer is staple machinery used in pharmaceutical and chemical industry. Drum mixers are highly efficient mixing equipment used for mixing of powders. These mixers have gallon drums which rotate in order to mix powder. The mixing process involves loading the material into the drum, which is secured in a hoop and rotated thereafter.

This equipment is very useful for mixing of ingredients or raw materials to be dispatched in barrels. Unlike other mixers, this mixer does not have any internal moving parts like blades or impellers; so the mixer avoids deterioration of material from friction-induced heating, since the drum has no dead space, so the material is uniformly blended. The drum mixers are powered by pneumatic or electric motors and available in various sizes. These mixers are configured in such a manner so that proper mixing and quality control of the end product is attained.

salient Features :

• Design is cGMP - Current Good Manufacturing Practices compliance
• All Product contact parts AISI 316 & non contact parts AISI 304.
• Available Capacity: 100 kg and 200 kg.
• This is a closed and contained system for blending and store.
• Main advantage of this system is that it is totally dust free.
• Controls panel with Cycle timer.
• Totally dust free.
• Option for Variable speed.

Safety Features :

• Interchangeable Product Container
• AC Frequency variable drive for product container.
• PLC Controls with HMI touch screen,
• Flame proof motor and Push Button station.

The Ribbon Vacuum Mixer Dryer operates at low temperature efficiently under vacuum. It is used for raw materials drying and mixing powder or granules of Pharmaceutical Materials, Crystalline, Insecticides, Pesticides, and Food industry and heat sensitive products. The Ribbon Vacuum Mixer Dryer cannot operate at low Temperature easily as it gets oxidized and is poisonous by nature. The Ribbon Vacuum Mixer Dryer is specially designed with a Double Helical Ribbon Agitator type blade by rigid fabricated structure motor, gear box which consists of a jacketed cylindrical shell with rotator.

During the rotation of the stirrer, there is provision for application of vacuum inside the shell and circulation of heating media in the jacket. As the product gently moving while the ribbon stirrer rotates, the large heating surface area presented by the internals of the cylindrical shell ensures uniform drying of the product. A fresh layer comes into contact with the indirectly heated walls of the shell when the diffusive action is induced by the mixing stirrer constantly. A well designed sealing system ensures positive circulation of a heating media in the jacket and also enables maintenance of deep vacuum inside the shell.

Optional Features :

• Option for two type designed of shell 1. Cylindrical type and 2."U" shape.
• Option for Flame Proof Electrical.
• Option for Automatic Charging.
• Option for lump breaker.
• Option for condenser, Receiver & Cyclone for solvent recovery.
• Option for advance PLC Controls with HMI touch screen.

Safety Features :

• Temperature controls, Vacuum relief Valve, Over load protection and Emergency stop.

salient Features :

• Design is cGMP- Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Continuous rotation of ribbon blade, material will make continuous movement motion in the container and reach to uniform mixing and drying at low temperature
• Dust free operation.
• High vacuum operation
• Fast and uniform homogeneous mixing & draying at low temperature.
• Solvent recovery
• Continues vacuum maintain during process.
• Very low value of final moisture even at low drying temperatures.
• Option for two type design of shell 1. Cylindrical type and 2. "U" shape.
• Continues vacuum maintenance during process.
• Vacuumized closed system with condenser, Receiver for solvent recovery & Cyclone separator to recovery the solid particle.
• Rapid & Complete discharge / Zero holdup after discharge
• Heating media can be used steam/ hot water / hot oil.

Blenders are used for mixing, lubricating and blending in Pharmaceutical, Nutraceutical, Food, Chemical, cosmetics, ceramics, pesticide, plastics and other Allied industries.

The Double shape blenders have long two corner of product container for more rubbing and tumbler effect to the material for fast and homogenizing mixing. It can perform homogenously dry mixing of free flowing powders, granules requiring low shearing force, Mixing and Blending of particles with rapid intermixing of particles irrespective of varying specific gravities. The material is loaded into the double cone blender drum. The double blender is tumbles the material in the container and spread out. The mixing is achieved in 5 to 15 minutes with better homogeneity.

salient Features :

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All Product contact parts AISI 316 & non contact parts AISI 304.
• Double Cone shape product container for Ideal dry mixer for lubrication of granules and homogenization mixing of multiple batches in to single batch.
• Available Capacity model in octagonal blender 25 kg to 2500 kg batch size.
• Enclosed rigid drive with reduction gear box and motor.
• "A" type rigid structure of the machine with two sides resting of product container.
• Product container having discharge with butterfly valve and man hole.
• Charging hole with hinged lid with seal for charging and cleaning.
• The product container rotates on sped 8 RPM.
• Safety reeling provided for rotating area of product container.
• Fixed baffles provided for lumps braking.
• Electric controls panel with cycle time.

Optional Features :

• Charging Option:
  • Loading & Unloading by Product container with Jacking trolley.
  • Vacuum conveying system.
  • Bin loading by hydraulic hoist.
• Rotary Intensifier with AC variable drive.
• AC Frequency variable drive for product container.
• PLC Controls with HMI touch screen,
• Flame proof motor and Push Button station.
• Inline milling and loading with vacuum transfer systems.

Safety Features :

• Safety reeling with limit switch.
• Overload protection and emergency stop.

Drum/ Barrel mixer is staple machinery used in pharmaceutical and chemical industry. Drum mixers are highly efficient mixing equipment used for mixing of powders. These mixers have gallon drums which rotate in order to mix powder. The mixing process involves loading the material into the drum, which is secured in a hoop and rotated thereafter.

This equipment is very useful for mixing of ingredients or raw materials to be dispatched in barrels. Unlike other mixers, this mixer does not have any internal moving parts like blades or impellers; so the mixer avoids deterioration of material from friction-induced heating, since the drum has no dead space, so the material is uniformly blended. The drum mixers are powered by pneumatic or electric motors and available in various sizes. These mixers are configured in such a manner so that proper mixing and quality control of the end product is attained.

salient Features :

• Design is cGMP - Current Good Manufacturing Practices compliance
• All Product contact parts AISI 316 & non contact parts AISI 304.
• Available Capacity: 100 kg and 200 kg.
• This is a closed and contained system for blending and store.
• Main advantage of this system is that it is totally dust free.
• Controls panel with Cycle timer.
• Totally dust free.
• Option for Variable speed.

Safety Features :

• Interchangeable Product Container
• AC Frequency variable drive for product container.
• PLC Controls with HMI touch screen,
• Flame proof motor and Push Button station.