Shreeji Expeller Industries

Partap Nagar, Ludhiana, Punjab

FEATURES :

• Steel Fabricated Structure
• Circular motion with gravity cleans the seeds
• Separated the dust and other particles from the Cleaned seeds.
• Removes impurities and give them on side using screw conveyor
• Highly Efficient for every seed.
• Low Maintenance.

FEATURES :

• Steel Fabricated Structure
• Vibratory motion for easy cleaning of seed.
• Also grades the seeds into sizes
• Separated the dust from the Cleaned seeds.
• Highly Efficient for every seed.
• Low Maintenance.

Hammer Mills are mainly used to disintegrate the product to a desired size ensuring proper expelling. Hammer Mill is mainly used in case of Copra, Palm Kernel & Soya bean processing.

Combined Action of Vibrating Motion of Fluidized bed creates separation of stones or any other impurities heavier than Product. Pressure type de-stoner is economical and simple to operate. Speed facilities almost complete removal of heavy impurities from products in one pass only.

Combined Action of Vibrating Motion of Fluidized bed creates separation of stones or any other impurities heavier than Product. Vaccum Type Destoner ensures better air distribution and provides dust free working in the plant through totally enclosed aspiration system with cyclone. Speed facilities almost complete removal of heavy impurities from products in one pass only.

FEATURES :

• Improved drive and thrust
• New air throat design no loss of good product
• Fast removes all heavy foreign material
• Easy to operate and adjust
• All material design allows easy cleaning
• Rubber busing Suspension.
• Less Maintenance

Most Suited as pre cleaner before further processing in Oil Milling in Oil Expeller. Positive eccentric, Four bearing design, High Speed Machine. Variable speed drive ensures quality separations at high capacity.

Flaker is normally used in case of Rape Seed to increase the capacity of expeller as well it reduces the wear & tear of the Expeller Machines.

Mixture Machine is Used to Mix the different ingredients of the cattle feeds in a batch.

HOPPER FOR MIXTURE
Hopper ensures the Easy travelling of material to mixture and also the storage for materials for the next Batch. It is sturdy in Construction and easy to maintain.

This Machine is Used to make pellets of the Cattle feed according to the desired size which are easy to eat for the Cattles and also easy to feed and to take care of Quantiy.

Combined Action of Vibrating Motion of Fluidized bed creates separation of stones or any other impurities heavier than Product. Pressure type de-stoner is economical and simple to operate. Speed facilities almost complete removal of heavy impurities from products in one pass only.

FEATURES :

• Improved drive and thrust
• New air throat design no loss of good product
• Fast removes all heavy foreign material
• Easy to operate and adjust
• All material design allows easy cleaning
• Rubber busing Suspension.
• Less Maintenance
• VACCUM TYPE DESTONER

  Combined Action of Vibrating Motion of Fluidized bed creates separation of stones or any other impurities heavier than Product. Vaccum Type Destoner ensures better air distribution and provides dust free working in the plant through totally enclosed aspiration system with cyclone. Speed facilities almost complete removal of heavy impurities from products in one pass only.

We are main supplier of this product.

we are offering these products Automatic Mustard Oil Making Machine at very reasonable rates. Also, these offered products are used in various food processing industries.

All Steel Fabrication and Improved Design.
For perfect alignment and stability.
Vertical Hinged 44" Four-section Pressing Box.Entirely eliminates the difficult task of removing box for relining or for replacement of worms, which saves lot of time and labour.

Steel Casted Chambers Reduces time and labour for relining of Cage Bars.
Shaft Withdrawal The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way and pressure worms and spacing collars can be changed without disturbing the shaft. The thrust of the pressure worm is taken upon a large thrust bearing.

Pressure Cone The final pressure of the cake is positively controlled by a Pressure Cone which is hard faced.
Cake at Discharge The cake thickness is controlled by a manually operated hand-wheel which is so simple that the choke gear is independent of the main drive and there is no possibility of a sudden load being placed on expeller motor.

Compressor Expeller feed is under automatic control and the seed or meal when entering the Expeller is given a preliminary compression by a small crammer-shaft driven by an automatically tensioned belt which stops when feed is excessive, starting again when the accumulation has been absorbed by the Expeller.

• Kettle / Cooker : Multi stage cooker for the conditioning of seeds, size 42 Diameter
• Compressing : Crammer Shaft gives extra Cramming of the seed or cake in the Feed
• Chamber : Vertical Hinged and can very easily be opened for replacement of wormsor cage bars. This saves a lot of time and labour.
• Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars.
• Bearings : Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
• Shaft Withdrawal : The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
• Cast Iron Bodies : For perfect alignment and stability.
• Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds.
• Reduced internal wear and tear
• Best Quality of Oil & Cake.
• Maintenance is less & easy
• Hardened Worm Assembly
• Steel Fabricated Base

We possess an unmatched expertise in offering highly advanced and innovative trans-esterification unit to our clients. These units find diverse applications in the agro industries related to the processing and extraction of bio-diesel. These units efficiently produce high outputs of bio-diesel used in the commercial market as an automobile fuel. All the processes of these machines are highly sophisticated and PLC BASED control. The by-products left over by this unit after the extraction of pure diesel like glycerol is also marketable. We can offer these units in various capacities as per the specified requirements of our clients, Biodegradable- 95% degradation in 28 days, where as diesel fuel degrades 40% in 28 days.

We Manufacture Bio-Diesel Plant Machinery for every Edible Non Edible Oil .We have Bio-Diesel Plant starting from 500 litreday to any Capacity , Transesterification Plant consists of Catalyst Mixture, Reaction Tank, Settling Tanks and Methanol Recovery and Washing System.The product obtained by trans-esterification of any vegetable oil is said to be bio diesel. Biodiesel is defined as the mono alkyl esters of long chain fatty acids derived from renewable lipid sources. Biodiesel is typically produced through the reaction of a vegetable oil or animal fat with methanol in the presence of a catalyst to yield glycerine and biodiesel (chemically called methyl esters).The biodiesel can be manufactured from Crude Palm Oil. The other oil sources are all the non edible oils, a few of them are Jatropha oil, Neem Oil, Karanja Oil, Mahua Oil, etc. Also used frying (cooking) oils can be used for bio diesel production.

Crude oil obtained from expellers or solvent extraction plant contains foreign impurities such as mucilage, gums, coloured & unfiltered matter from the seed. Also Free Fatty Acids (F.F.A.) which tend to deteriorate the oil on storage, thus making it unfit for edible purpose. The batch refining process consists of following section :In batch oil refinery process or cooking oil refinery process, a measured quantity of oils is processed in sequence of neutralizing, bleaching & deodorizing.

The product obtained by trans-esterification of any vegetable oil is said to be bio diesel. Biodiesel is defined as the mono alkyl esters of long chain fatty acids derived from renewable lipid sources. Biodiesel is typically produced through the reaction of a vegetable oil or animal fat with methanol in the presence of a catalyst to yield glycerine and biodiesel (chemically called methyl esters).The biodiesel can be manufactured from Crude Palm Oil. The other oil sources are all the non edible oils, a few of them are Jatropha oil, Neem Oil, Karanja Oil, Mahua Oil, etc. Also used frying (cooking) oils can be used for bio diesel production.

We Manufacture Bio-Diesel Plant Machinery for every Edible Non Edible Oil .We have Bio-Diesel Plant starting from 500 litreday to any Capacity , Transesterification Plant consists of Catalyst Mixture, Reaction Tank, Settling Tanks and Methanol Recovery and Washing System.Biodiesel is an alternative fuel, which can be used in neat form, or blended with petroleum diesel for use in compression ignition (diesel) engines. Its physical and chemical properties as it relates to operation of diesel engines are similar to petroleum based diesel fuel.

First Stage of Refining is to Remove Free Fatty Acids(F.F.A.) wih caustic Soda Treatment called Neutralizing Process Thereafter further processed in the bleaching section under vacuum and treated with bleaching earth and activated carbon for removing colour .Finally it will be Deodorized under high vacuum and high temperature to remove the odour from the oil. The Edible obtained in a batch refinery is of good quality meeting all requirement of International Standard. However in case of Sunflower and rice bran oil, there is one more process of Dewaxing after bleaching Process.

• vk10Flexible opening of main cage for easy maintenance.
• Low initial investment, easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds.
• Reduced wear and tear of Parts
• Best Quality of Oil & Cake.
• Maintenance is less & easy
• Box type construction form to ensure any type shock loads.
• Single Reduction Gear Box with Spur Gear
• Hardened Worm Assembly
• Cast Iron Bodies & Base.
• Cake Thickness Cannot be adjusted on running machine
• Feeding Drum: Single Stage/Double Stage with & without heating arrangement ( As Required).

Our company has gained name and fame in manufacturing and exporting E Oil Expeller Machine. Owing to its quality, efficiency, and its price which is quite reasonable, this product is highly acknowledged for in the market. This is made by using quality raw materials and several advanced machinery, the product has a highly sturdy, corrosion resistant, and durable body.