Our Products
Ores And Minerals
1 Products availableLaboratory Chemicals
1 Products availableCaustic Soda
1 Products availableIndustrial Chemicals
1 Products availablePetrochemicals & Petroleum Products
1 Products availableDry Powder Flavours
1 Products availableNitrogen Fertilizer
1 Products availableWe offer a complete product range of Barium Hydroxide Octahydrate
Specifications
Ca(oH)2 | 90.28% not less than |
---|---|
Moisture | 0.80% not more then |
Mesh Size (By 200/300 mesh) | pass by 300 mesh not more then |
Arising temperature | 0.5*c not more then |
Residue (At 200/300 mesh) | 1.0% At 300 mesh |
Acid insoluble (As SiO2) | 0.30% not less then |
Available CaO | 68.31% |
Colour | Pure White Proper |
Note : If in dispute case to be check 7 maintain as CaO, SiO2, Fe2O3, Mn2O3, MgO.I.R., CaCo3, Cal & any testing total 99.99%. |
Specifications
Characteristic | Requriement | Observation |
---|---|---|
Residue on 600 Micron IS Sieve (Percent by Mass, Max) | 0.05 | 0.035 |
Viscosity by say bolt furol Viscometer, Seconds(br)1)T 50oC | (br)20-100 | (br)24 |
Coagulation of Emulsion at low Temperature | Nil | Nil |
Storage Stability after 24 hrs, percentage, Max | 2 | 1.5 |
Particle Change | Positive | Positive |
Miscibility with Water | No Coagulation | No Coagulation |
Test on Residue (a) Residue by evaporation percent, Min (b) Penetration at 25oC, 100 g, 5 sec (c) Ductility 27oC,cm , Min (d) Solubility : In trichloroethylene , Percent by Mass, Min | 60 80-150 50 98 | 65 85 56 99.5 |
Specifications
Item | Result |
---|---|
Purity, % | 99.38 |
Moisture, % | 0.5 |
Insoluble Content, % | 0.03 |
Chlorides Content | 0.23 |
Sodium Nitrate Content | 0.02 |
Sodium Carbonate Content | 0.07 |
Iron Content | 0.005 |
PH of 10% Solution | 6.8 |
Specifications
PURITY | 98.5% MIN. |
---|---|
BARIUM CARBONATE | 1.0% MAX. |
CHLORIDE | 0.05% MAX. |
IRON | 0.003% MAX. |
INSOLUBLE MATTER IN HYDRO-CHLORIDE ACID | 0.05% MAX. |
NON-SENDIMENT IN SULPHURIC ACID | 0.05% MAX. |