Cadmium bearing alloys, offered by us, are free flowing with narrow melting ranges. Cadmium bearing alloys are known for their resistance to corrosion in chlorine, sulfur, and steam environment etc. Properties :-the lowest brazing temperature range of the filler metalsflows more freely into narrow clearance capillary jointssuitable for rapid or slow methods of heatinglow melting filler metal for brazing electrical contacts and molybdenum or copper-tungsten electrodesused in brazing operation, requiring a low temperature, quick and complete penetration, and meet joints of high strength that need little or no finishingused in brazing steel, copper, brass, gunmetal tin bronzes, aluminum and manganese bronzes, nickel silver of all typesfree flowingsuitable for general-purpose work requiring slightly higher brazing temperaturewhilst their melting ranges are helpful where joint clearance are not uniformtend to liquate unless proper care is takenused for working temperature of -200 up to +200used for any steels, copper and copper alloys and nickel and nickel alloysused for brazing stainless steel copper, nickel, and its alloysspecifications :-"tech-braze" grade of brazing alloynominal composition %melting rangeindian standardinternational standardsagcuzncdothersocis : 2927 - 1975din (8513)aws (a5.8)s - 150cd5015.516.518-627-635ba cu ag11l-ag50cdbag-1ait is free-flowing with narrow melting ranges. Its resistance to corrosion in chlorine, sulfur, and steam environment.s - 145cd45151624-607 - 619ba cu ag 15l-ag45cdbag-1this has the lowest brazing temperature range of the filler metals. It also flows more freely into narrow clearance capillary joints and it is suitable for rapid or slow methods of heating.s - 144cd442713151p595-660---low melting filler metal for brazing electrical contacts and molybdenum or copper-tungsten electrodes.s -143cd43162021-615-620ba cu ag 16a--this can be used in brazing operation requiring a low temperature, quick and complete penetration, and meet joints of high strength that need little or no finishing. It can be used in brazing steel, copper, brass, gunmetal tin bronzes, aluminum and manganese bronzes, nickel silver of all types.s - 140cd40192120-595-630---s - 135cd35262118-607-702ba cu ag 20l-ag34cdbag-2these brazing alloys are free-flowing and are suitable for general purpose work requiring slightly higher brazing temperature. Whilst their melting ranges are helpful where joint clearance are not uniform, these brazing filler metals may tend to liquate unless proper care is taken.s - 130cd30272320-607 - 710ba cu ag 21l-ag30cdbag-2ait is more economical. These brazing alloys require high temperature and this helpful where joint clearance are not uniform.s - 125 (sp)25302520-605 - 680---wide melting range requires and somewhat more subject to liquation and may require more care during brazing. Therefore, they are not normally recommended for applications with slow heating rates.

Brazing alloy is also used for tungsten carbide tipped tools. Its low zinc content makes it suitable for furnace brazing. Brazing alloy has good resistance in marine environment and caustic media. When used on stainless steel, it will inhibit interface corrosion. Because its nickel content improves wet ability on tungsten carbide tools tips, the largest use is to braze carbide tool assemblies. It is used extensively for carbide tip brazing, but flows less freely. This filler metal does not contain cadmium. Known for :-low zinc content makes it suitable for furnace brazinggood resistance in marine environment and caustic mediaused on stainless steel, it will inhibit interface corrosionits nickel content improves wet ability on tungsten carbide tools tipsthe largest use is to braze carbide tool assembliesused extensively for carbide tip brazing, but flows less freelydoes not contain cadmiumspecifications :-"tech-braze" grade of brazing alloynominal composition %melting rangeindian standardinternational standardsagcuzncdothersocis : 2927 - 1975din (8513)aws (a5.8)s - 156ni56 42--2 ni771-893--b ag 13as - 155ni54 405-1 ni718-857ba cu ag 8b-b ag-13brazing alloy is used for service temperature. Its low zinc content makes it suitable for furnace brazing.s - 150ni50 15.515.5163 ni632-688ba cu ag 12l-ag50cdnib ag-3it has good resistance in marine environment and caustic media. When used on stainless steel, it will inhibit interface corrosion. Because its nickel content improves wetability on tungsten carbide tools tips, the largest use is to braze carbide tool assemblies.s - 145ni40 30 25 -5 ni 650-850---s - 140ni40 3028-2 ni671-779ba cu ag 18-b ag-4it is used extensively for carbide tip brazing, but flows less freely. This filler metal does not contain cadmium.

Brazing alloy is also used for tungsten carbide tipped tools. Its low zinc content makes it suitable for furnace brazing. Brazing alloy has good resistance in marine environment and caustic media. When used on stainless steel, it will inhibit interface corrosion. Because its nickel content improves wet ability on tungsten carbide tools tips, the largest use is to braze carbide tool assemblies. It is used extensively for carbide tip brazing, but flows less freely. This filler metal does not contain cadmium. Known for :-low zinc content makes it suitable for furnace brazinggood resistance in marine environment and caustic mediaused on stainless steel, it will inhibit interface corrosionits nickel content improves wet ability on tungsten carbide tools tipsthe largest use is to braze carbide tool assembliesused extensively for carbide tip brazing, but flows less freelydoes not contain cadmiumspecifications :-"tech-braze" grade of brazing alloynominal composition %melting rangeindian standardinternational standardsagcuzncdothersocis : 2927 - 1975din (8513)aws (a5.8)s - 156ni56 42--2 ni771-893--b ag 13as - 155ni54 405-1 ni718-857ba cu ag 8b-b ag-13brazing alloy is used for service temperature. Its low zinc content makes it suitable for furnace brazing.s - 150ni50 15.515.5163 ni632-688ba cu ag 12l-ag50cdnib ag-3it has good resistance in marine environment and caustic media. When used on stainless steel, it will inhibit interface corrosion. Because its nickel content improves wetability on tungsten carbide tools tips, the largest use is to braze carbide tool assemblies.s - 145ni40 30 25 -5 ni 650-850---s - 140ni40 3028-2 ni671-779ba cu ag 18-b ag-4it is used extensively for carbide tip brazing, but flows less freely. This filler metal does not contain cadmium.

Tin solders also called soft solders, which has long been used as a solder in the form of an alloy with lead. Tin forms a eutectic mixture with lead. Such solders are primarily used for solders for joining pipes or electric circuits. Tin bonds readily to iron, and is used for coating lead or zinc and steel to prevent corrosion. For offering the optimum quality Tin Solder, we have listed among the leading manufacturers and exporters of Tin Solder.

Features :-

• Used as a solder in the form of an alloy with lead
• A eutectic mixture with lead
• Primarily used for solders for joining pipes or electric circuits
• Used for coating lead or zinc and steel to prevent corrosion

Shree Giriraj Metals Pvt Ltd is a leading supplier of superior quality of Silver Brazing Flux. Silver Brazing Flux is a substance, which cleans the metals when they are joining while soldering, brazing, and welding. In high-temperature metal joining processes, the primary purpose of flux is to prevent oxidation of the base and filler materials. Secondarily, Silver Brazing Flux acts as a wetting agent in the soldering process, reducing the surface tension of the molten solder and causing it to better wet out the parts to be joined. Additionally, flux allows solder to flow easily on the work piece.

Features :-

• Cleans the metals when they are joining while soldering, brazing, and welding
• High-temperature metal joining processes
• Prevent oxidation of the base and filler materials
• Acts as a wetting agent in the soldering process
• Reducing the surface tension of the molten solder and causing it to better wet out the parts to be joined
• Allows solder to flow easily on the work piece

Brazing alloy is also used for Tungsten Carbide Tipped Tools. Its low zinc content makes it suitable for furnace brazing. Brazing alloy has good resistance in marine environment and caustic media. When used on stainless steel, it will inhibit interface corrosion. Because its nickel content improves wet ability on tungsten carbide tools tips, the largest use is to braze carbide tool assemblies. It is used extensively for carbide tip brazing, but flows less freely. This filler metal does not contain cadmium.

Known For :-

• Low zinc content makes it suitable for furnace brazing
• Good resistance in marine environment and caustic media
• Used on stainless steel, it will inhibit interface corrosion
• Its nickel content improves wet ability on tungsten carbide tools tips
• The largest use is to braze carbide tool assemblies
• Used extensively for carbide tip brazing, but flows less freely
• Does not contain cadmium

Specifications :-

"TECH-BRAZE" Grade of Brazing Alloy	Nominal Composition %					Melting Range	Indian Standard	International Standards
	Ag	Cu	Zn	Cd	Others	oC	IS : 2927 - 1975	Din (8513)	AWS (A5.8)
S - 156Ni	56	42	-	-	2 Ni	771-893	-	-	B Ag 13a
S - 155Ni	54	40	5	-	1 Ni	718-857	BA Cu Ag 8B	-	B Ag-13
Brazing alloy is used for service temperature. Its low zinc content makes it suitable for furnace brazing.
S - 150Ni	50	15.5	15.5	16	3 Ni	632-688	BA Cu Ag 12	L-Ag50CdNi	B Ag-3
It has good resistance in marine environment and caustic media. When used on stainless steel, it will inhibit interface corrosion. Because its nickel content improves wetability on tungsten carbide tools tips, the largest use is to braze carbide tool assemblies.
S - 145Ni	40	30	25	-	5 Ni	650-850	-	-	-
S - 140Ni	40	30	28	-	2 Ni	671-779	BA Cu Ag 18	-	B Ag-4
It is used extensively for carbide tip brazing, but flows less freely. This filler metal does not contain cadmium.

The company has emerged as a highly reliable Manufacturer & Supplier of Aluminium Brazing Flux Powder. The company is offering a wide range of Fine Aluminium Brazing Flux Powder and the several variants have their own specific uses and features. The Aluminium Brazing Flux Powder is delivered in the highly durable packaging and is competitively priced as well.