ShreeGee Impex Pvt. Ltd.

Garh Road, Meerut, Uttar Pradesh

WE HAVE NBR, H-NBR, FVMQ, FKM HOSES FOR THE FUEL LINE.

all types of rubber moulded parts seals, o-rings, hangers, air duct hoses, h-couplings, groumets.

Rubber is known as Thermoset elastomer. Rubber parts are extensively used in several industries as they are capable of offering both flexibility and durability. Rubber products have decent thermal and insulation characteristics.

Application

• Mandrel formed drain tubes
• Pressure switch tubing
• Panel gaskets and seals
• O-rings
• Air Filter Hoses(Plain n Ribbed)
• Hoses
• Grommets
• Shock Absorber
• Dust  Covers
• Electrical insulation and stinger covers

Benefits and Advantages

• Resistance to UV exposure, ozone, aging, weathering, and many chemicals – great for outdoor applications.
• Stability in high and low Temperature.
• Steam and water resistant.
• Can be fabricated in a variety of ways, which includes custom moulded and extruded parts.
• Long-term part lifespan allows for fewer replacement parts, saving money in the long run.

Moulding Processes

• Transfer Moulding
• Injection Moulding
• Compression Moulding

Used RubberEPDM, NBR, HNBR, Silicone, Viton, Neoprene, etc.

Features:

• Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
• Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
• Material properties & performance as per SAE J20, SAE J30, SGH 1801 or as any specified customer standard.
• Excellent Ozone and UV Resistance.

Sizes :

• ID1 (mm): As per Customer Requirement
• ID2 (mm): As per Customer Requirement
• Length (mm) : As per Customer Requirement
• Wallthickness (mm): As per Customer Requirement
• Ply : As per Customer Requirement or As per Burst Pressure required

Variable speed V-belts, also termed V / S – belts, are temperature and oil resistant as well as anti-static. A special rubber compound with textile fibres oriented across the length of the belt provides high stability and minimizes deflection in the cross section. The moulded cog ensures maximum flexibility and optimum fit in the pulley grooves.

Features : Variable speed V-belts, also termed V / S – belts, are temperature and oil resistant as well as anti-static. A special rubber compound with textile fibres oriented across the length of the belt provides high stability and minimizes deflection in the cross section. The moulded cog ensures maximum flexibility and optimum fit in the pulley grooves. The cord, the power transmitting element, has been designed for heavy power transmission while at the same time ensuring a very high degree of length stability. Special belts are produced to order, e.g.with Aramid cord.

Construction

• Rubber impregnated cross woven cotton polyester fabric.
• Cushion rubber
• Low Stretch high modulous adhesive activated polyester cable cord.
• Compression rubber
• Crack barrier.

Designed specially for reverse-bend serpentine drive. New cross-section for maintaining proper belt position in pulley groove even in case of extreme reverse-bend drive. Owing to larger flexibility given by as well as to NEW CROSS Section, the service life has become longer than that of traditional double V-belts.

Features :

• Designed specially for reverse-bend serpentine drive.
• New cross-section for maintaining proper belt position in pulley groove even in case of extreme reverse-bend drive.
• Owing to larger flexibility given by as well as to NEW CROSS Section, the service life has become longer than that of traditional double V-belts.

Construction :

• Rubber impregnated cross woven cotton-polyester fabric.

• Low Stretch high modulus adhesive activated polyester cable cord.
• Cushion rubber

• Compression rubber

Alaska F.H.P. V-belts are built for maximum tension control, drive uniformity and long life, with minimum heat build-up and stretching on low horse power electric motors and gasoline engines. They are designed for high speed drive and short center distance.

Features :

• Alaska F.H.P. V-belts are built for maximum tension control, drive uniformity and long life, with minimum heat build-up and stretching on low horse power electric motors and gasoline engines. They are designed for high speed drive and short center distance Classical V-Belts
• For classical drives, high speed and high torque drive on light or heavy industrial or automotive machinery. Alaska classical V-belts have exceptional length stability stability and drive uniformity.

Construction :

• Rubber impregnated cross woven cotton-polyester fabric.
• Low Stretch high modulous adhesive activated polyester cable cord.
• Cushion rubber
• Compression rubber

Cut edge moulded cogged V-belts have a precision cogged profile base which is designed for uniform stress distribution and superior heat dissipation.

Features :

• Cut edge moulded cogged V-belts have a precision cogged profile base which is designed for uniform stress distribution and superior heat dissipation.
• Their construction permits greater flexibility and a higher kilowatt capacity for exceptional performance on small diameter pulleys using FHP, Classical, Wedge and Narrow section drives.
• The robust construction is specially designed to fit the pulley grooves exactly, which allows maximum wedging action.
• The belts are built with low stretch-high modulus stiff polyester tensile members to resist fatigue and shock loads. The cord and polychloroprene rubber are bonded to prevent separation and reinforcement layers on both sides of the tensile member improve cord stability. All belts are oil & heat-resistant and static conducting.

Construction:

• Rubber impregnated cross woven cotton polyester fabric.
• Low Stretch high modulus adhesive activated stiff polyester cable cord.
• Moulded cogs for better flexibility.
• Fibre filled Polychloroprene compression rubber

Ethylene acrylic rubber is a mixed polymer of ethylene and methyl acrylate, with the addition of a small amount of a carboxylate crosslinking monomer. The combination of ethylene and methyl acrylate gives the rubber its excellent thermal stability, while its resistance to media such as oils and fats is due to the polarity of the methyl acrylate commoner. A higher acrylate content improves resistance to oils, but reduces low-temperature flexibility.

AEM Application

• Turbocharger hoses and other hose applications
• Blow-by gas and diesel particle filter sensor sheaths
• Air management elements
• Oil- and heat-resistant vibration dampers
• Engine and transmission seals
• Cylinder head cover gaskets
• Oil filter and oil sump gaskets
• Shift pistons

AEM Main Properties

• Excellent weather and ozone resistance
• Very good heat and chemical resistance
• Resistant to most oils and lubricants (even those containing aggressive additives)
• Low compression set
• Good for low-temperature applications
• Thermal application range: -40 to +150°C, up to 175°C for short periods

Features:

• Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
• Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
• Material properties & performance as per SAE J20, SAE J30, SGH 1801 or as any specified customer standard.
• Excellent Ozone and UV Resistance.

Sizes :

• ID (mm) : As per Customer Requirement
• Leg Length1(mm) : As per Customer Requirement
• Leg Length2 (mm) : As per Customer Requirement
• Wallthickness (mm) : As per Customer Requirement
• Ply : As per Customer Requirement or As per Burst Pressure required

Features:

• Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
• Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
• Material properties & performance as per SAE J20, SAE J30, SGH 1801 or as any specified customer standard.
• Excellent Ozone and UV Resistance.

Sizes :

• ID (mm) : As per Customer Requirement
• Leg Length1(mm) : As per Customer Requirement
• Leg Length2 (mm) : As per Customer Requirement
• Wallthickness (mm) : As per Customer Requirement
• Ply : As per Customer Requirement or As per Burst Pressure required

Features:

• Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
• Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
• Material properties & performance as per SAE J20, SAE J30, SGH 1801 or as any specified customer standard.
• Excellent Ozone and UV Resistance.

Sizes :

• ID (mm) : As per Customer Requirement
• Leg Length1(mm) : As per Customer Requirement
• Leg Length2 (mm) : As per Customer Requirement
• Wallthickness (mm) : As per Customer Requirement
• Ply : As per Customer Requirement or As per Burst Pressure required

Features:

• Custom ply Polyester/Aramid/Cotton/ Kevlar/knitted fabric reinforcement.
• Custom ply configuration to meet desired flexibility & Burst pressure, Vacuum Pressure and Impulse Resistance Requirement.
• Material properties & performance as per SAE J20, SAE J30, SGH 1801 or as any specified customer standard.
• Excellent Ozone and UV Resistance.

Sizes :

• ID1 (mm) : As per Customer Requirement
• ID2 (mm): As per Customer Requirement
• Leg Length(mm) : As per Customer Requirement
• Wallthickness (mm) : As per Customer Requirement
• Ply : As per Customer Requirement or As per Burst Pressure required