Our Products
Blankets
2 Products availablePaper
2 Products availableRope
2 Products availableFibers
1 Products availableWool
1 Products availableInsulators And Insulation Materials
1 Products availableYarn
1 Products availableOur Complete range of products are BIO SOLUBLE MODULE, BIO SOLUBLE BOARD, polyurethane boards and Heat Guard.
ShreeCera Twisted Rope is a three-ply rope manufactured from ShreeCera long fiber yarn reinforced with fiber glass / SS wire It contains 15 20% organic carrier fiber to facilities the carding process which may burn off at a lower temperature. It is a dense resilient high temperature refractory, possessing excellent thermal properties, chemical stability and high mechanical strength.
SHREECERA ROPES | |||
---|---|---|---|
Grade) | 1260 C & 1425° C | ||
Rope Type | Twisted - Fiberglass yarn / SS wire, SS 304 Braided |
||
Density (Kg/m ) | 240 - 600 | ||
Packing | 5 - 25 mtrs length | ||
LOI (%) | < 16 | ||
Properties and Chemical Composition based on Base Fiber | |||
Tensile Strength ( Kg/cm ) | >0.4 | ||
Linear Shrinkage (%) 1200 C for 24 Hrs | < 3.5 | ||
Thermal Conductivity (W/m K) at 550 C Mean Temperature |
0.12 | ||
Chemical Composition | 1260 ° C | 1425°C | |
Al2O3% | 41 - 49 % | 30 - 34 % | |
SiO2 % | 49 - 58 % | 50 - 54 % | |
ZrO2% | 0-7% | 14-18 % | |
Fe2O3% | Max 0.1% | Max 0.1% |
ShreeCera Twisted Rope is a three-ply rope manufactured from ShreeCera long fiber yarn reinforced with fiber glass / SS wire It contains 15 20% organic carrier fiber to facilities the carding process which may burn off at a lower temperature. It is a dense resilient high temperature refractory, possessing excellent thermal properties, chemical stability and high mechanical strength.
SHREECERA ROPES | |||
---|---|---|---|
Grade) | 1260 C & 1425° C | ||
Rope Type | Twisted - Fiberglass yarn / SS wire, SS 304 Braided |
||
Density (Kg/m ) | 240 - 600 | ||
Packing | 5 - 25 mtrs length | ||
LOI (%) | < 16 | ||
Properties and Chemical Composition based on Base Fiber | |||
Tensile Strength ( Kg/cm ) | >0.4 | ||
Linear Shrinkage (%) 1200 C for 24 Hrs | < 3.5 | ||
Thermal Conductivity (W/m K) at 550 C Mean Temperature |
0.12 | ||
Chemical Composition | 1260 ° C | 1425°C | |
Al2O3% | 41 - 49 % | 30 - 34 % | |
SiO2 % | 49 - 58 % | 50 - 54 % | |
ZrO2% | 0-7% | 14-18 % | |
Fe2O3% | Max 0.1% | Max 0.1% |
ShreeCeraBio soluble fiber is highly acid resistant alkaline earth silicate (AES), ShreeCera Bio Soluble fiber is vindicated from the carcinogen classification in the . European Union under the terms of European Directive 67/548/EEC and the German Technical Rules for Hazardous Substances (TRGS 905). ShreeCera Bio Soluble ber has been developed to high temperature characteristics required to act as an alternative to RCF.
ShreeCera-:Bio soluble fiber blanket is highly acid resistant alkaline earth silicate (AES), ShreeCera Bio Soluble fiber is vindicated from the carcinogen classification in the European Union under the terms of European Directive 67/548/EEC and the German Technical Rules for Hazardous Substances (TRGS 905).
ShreeCera Bio Soluble Fiber has been developed to high temperature characteristics required to act as an alternative to RCF, depends on equipment and operating conditions. ShreeCera Bio soluble fiber blanket reveal exceptional insulating properties at high temperatures.
PHYSICAL PROPERTIES | |||
Grade | 1100oC | ||
Colour | White | ||
Density ( Kg/m3 ) | 64 | 96 | 128 |
MECHANICAL PROPERTIES | |||
Tensile Strength ( Kg/cm2) | >0.15 | >0.25 | >0.4 |
Mean Fibre Dia (micron) | 2.6 – 3.5 | ||
Shot content (%) | < 20 | ||
Linear Shrinkage (%) at 1100oC for 24hrs | < 1.5 | ||
Thermal Conductivity (W/moK) Mean Temp (Typical) | |||
At 200oC | 0.055 | 0.050 | 0.045 |
At 400oC | 0.100 | 0.085 | 0.080 |
At 500oC | 0.160 | 0.145 | 0.120 |
At 800oC | 0.280 | 0.210 | 0.180 |
ShreeCera-:ShreeCera modules are compressed bio soluble blankets folded with specially designed internal anchoring system which gives choice of attaching the module to the shell by welding, bolting or self tapping screw method.
ShreeCera Bio soluble module anchoring systems can provide an option of backup blanket lining with hot face modular lining.
A backup blanket lining serves as safety lining serves as safety lining in all unlikely event of module failure. It also makes it convenient to provide vapour barrier for protection against attack of sulphur gases on the furnace sell.
ShreeCera-:Bio soluble fiber boards are made from high quality alkaline earth silicate fibers with suitable organic and inorganic binders through vacuum forming method.
ShreeCera boards are high stability and excellent performance. ShreeCera Bio Soluble fiber is vindicated from the carcinogen classification in the European Union under the terms of European Directive 67/548/EEC and the German Technical Rules for Hazardous Substances (TRGS 905).
PHYSICAL PROPERTIES | |
---|---|
Grade | 1100oC |
Working temperature | 1050 oC |
Density(Kg/m3) | 320 |
MECHANICAL PROPERTIES | |
Compressive strength ( Kg/cm2) min at 10% deformation | 3.2 |
Modules of rapture cold face ( Kg/cm2) | 6 |
Modules of rapture hot face ( Kg/cm2) | 2.2 |
Loss on ignition (%) at 1000°C | < 8 |
THERMAL PROPERTIES | |
Linear Shrinkage (%) at 1100oC for 24hrs | < 1.5 |
Thermal Conductivity (W/moK) Mean Temp | |
At 200oC | 0.07 |
At 400oC | 0.09 |
At 500oC | 0.10 |
CHEMICAL PROPERTIES | |
SiO2% | 62 – 67 |
CaO% | 25 – 32 |
MgO% | 3 – 7 |
Others | < 1 |
ShreeCera-:Bio soluble fiber papers are made from high quality alkaline earth silicate fibers with suitable organic binders through vacuum forming method.
Paper can easily cut and flexible to insulation. ShreeCera papers are high temperature stability and excellent performance.
ShreeCera Bio Soluble fiber is vindicated from the carcinogen classification in the European Union under the terms of European Directive 67/548/EEC and the German Technical Rules for Hazardous Substances (TRGS 905).
PHYSICAL PROPERTIES | |
---|---|
Grade | 1100oC |
Working temperature | 1050 oC |
Density(Kg/m3) | 220 |
MECHANICAL PROPERTIES | |
Tensile strength ( Kg/cm2) | >0.8 |
Loss on ignition (%) at 1000 °C | < 10 |
THERMAL PROPERTIES | |
Linear Shrinkage (%) at 1100oC for 24hrs | < 1.0 |
Thermal Conductivity (W/moK) Mean Temp | |
At 200oC | 0.08 |
At 400oC | 0.09 |
At 500oC | 0.10 |
CHEMICAL PROPERTIES | |
SiO2% | 62 – 67 |
CaO% | 25 – 32 |
MgO% | 3 – 7 |
Others | < 1 |
ShreeCeraWool is a light weight thermal insulation material produced by spun process from a high purity alumina-silica composition having long and high refractory properties and resistant to most chemical attack.
ShreeCera-:Blanket is a light weight needled blanket, provides effective solution to a wide range of thermal insulation applications. Manufactured using state of the art spinning and double needling technique, these blankets offer low thermal conductivity and superior insulation performance.
ShreeCera Blanket is made from high purity Alumina, Silica and Zirconia. It is highly efficient insulator with extremely low shrinkage characteristics.
ShreeCera-:In the layered construction (Blanket, Board and Moist pack) the anchors are exposed to hot face temperature and are limiting factors for use of Ceramic fiber in high temperature applications. To overcome this limitation, modules are used.
Module anchoring systems can provide an option of backup blanket lining with hot face modular lining. A backup blanket lining serves as safety lining in all unlikely event of module failure. It also makes it convenient to provide vapour barrier for protection against attack of sulphurous gases on the furnace shell.
PHYSICAL PROPERTIES | |
---|---|
Grade | 1100oC |
Working temperature | 1050oC |
Density(Kg/m3) | 160 to 190 |
Anchor grade | SS 304,310,316 |
MECHANICAL PROPERTIES OF BLANKET | |
Tensile Strength ( Kg/cm2) | >0.40 |
Mean Fibre Dia (micron) | 2.6 – 3.5 |
Shot content (%) | < 20 |
THERMAL PROPERTIES OF BLANKET | |
Linear Shrinkage (%) at 1100oC for 24hrs | < 1.5 |
Thermal Conductivity (W/moK) Mean Temp | |
At 200oC | 0.045 |
At 400oC | 0.080 |
At 500oC | 0.120 |
CHEMICAL PROPERTIES OF BLANKET | |
SiO2% | 62 – 67 |
CaO% | 25 – 32 |
MgO% | 3 – 7 |
Others | < 1 |
ShreeCera Ceramic fiber paper consists primarily of high purity alumino-silicate fiber and is made through a fiber washing process. This process controls the unwanted content to a very minimal level within the paper. KT ceramic fiber paper features light weight, structure uniformity and low thermal conductivity, which serve as a perfect solution for high temperature insulation, chemical corrosion resistance, and thermal shock resistance. Ceramic fiber paper can be used in various types of refractory and sealing applications and is available with a variety of thicknesses and temperature ratings.
Applications :
PHYSICAL PROPERTIES | |
---|---|
Grade | 1100oC |
Working temperature | 1050 oC |
Density(Kg/m3) | 220 |
MECHANICAL PROPERTIES | |
Tensile strength ( Kg/cm2) | >0.8 |
Loss on ignition (%) at 1000 °C | < 10 |
THERMAL PROPERTIES | |
Linear Shrinkage (%) at 1100oC for 24hrs | < 1.0 |
Thermal Conductivity (W/moK) Mean Temp | |
At 200oC | 0.08 |
At 400oC | 0.09 |
At 500oC | 0.10 |
CHEMICAL PROPERTIES | |
SiO2% | 62 – 67 |
CaO% | 25 – 32 |
MgO% | 3 – 7 |
Others | < 1 |
ShreeCera Ceramic Fiber Textiles include the finished products of Ceramic Fiber Yarn, Ceramic Fiber Tape, Ceramic Fiber Cloth, etc. ShreeCera Ceramic Fiber Textile is specially processed with ceramic fiber spun bulk, alkali-free glass filament, and high temperature resistant stainless alloy wires. Besides the above products, we can also make high temperature resistant textile according to the customers' demands for specific operating temperature, conditions, and performance. ShreeCera Ceramic Fibre Textiles can be used upto 1250C but when tensile strength is important, the temperature limits of the inserted material is to be considered.
ShreeCera Ceramic Textile Productscan be made available with minimum or no organic carrier. The main advantage of this product is exceptionally low smoke-off upon heating compared with standard fiber textiles. Consequently, these products are very much suited to fire protection applications and for hot wrapping of cables, pipes and ducts. These products are available only with SS wire re-inforcement.
ShreeFoamRigid PU foam cored pipe sections manufactured and are available in varied sizes and density. Being CFC free polyurethane Foam, it is "Environment Friendly" and have excellent dimensional and thermal insulation properties together with compressive strength
ShreeFoamPIR has low smoke emission and will not melt or dip in a fire. PIR being Polyisocyanurate foam, has a higher hot surface performance upto 150C compared to 110C of normal Polyurethane foam.
After successfully manufacturing and marketing Ceramic Fiber Products, high "ShreeCera" temperature insulation material, have now entered into production arena of a "ShreeFoam" low temperature industrial insulation material making available insulation material required for high temperature and low temperature insulation under one roof.
Polyurethane (PUF)foam has outstanding insulation properties to maintain temperature in 0cold / hot environments. PUF Materials are suitable for temperature range between -180 C to +110C.
Polyisocyanurate (PIR)foam slabs and pipe sections are suitable for use between -200C to +150C. It has low thermal conductivity value of maximum 0.021 w/mk at 10C. It is not easily ignitable and has negligible water permeability and is most suited insulation material for cold/chilled pipelines & equipments. PIR is the recommended insulation material for LNG pipe insulation.
TECHNICAL SPECIFICATIONS FOR PUF / PIR BOARDS & PIPE SECTIONS | ||
PROPERTIES | PUF | PIR |
---|---|---|
Temperature Limit | -180 C to +110 C | -200 C to +150 C |
Density | 36 + 2 Kg/m³ Higher densities available on customer requirements |
36 + 2 Kg/m³ Higher densities available on customer requirements |
Available Size | 1. Boards 1m x 0.5m 2. Pipe Section to suit 50 to 250 mm NB x 1m long 3. Other sizes also available on demand 4. Custom moulded shapes to suit Horton spheres & shiplap pipe-section. 5. Thickness from 25 mm to 100 mm & Cast-in-Situ. |
1. Boards 1m x 0.5m 2. Pipe Section to suit 50 to 250 mm NB x 1m long. 3. Other sizes also available on demand 4. Custom moulded shapes to suit Horton spheres & shiplap pipe-section. 5. Thickness from 25 mm to 100 mm & Cast in Situ. |
Thermal Conductivity ‘k’ (initial) at 100 C | Max. 0.021 W/mk (0.15 BTU-in/hr.sft.degF) | Max. 0.021 W/mk (0.15 BTU-in/hr.sft.degF) |
Fire Resistance Properties | ||
Surface Spread Flame (BS:476 Part-7, 1987) | --------------- | Class - I |
Ignitability (BS:476 Part-5, 1968) | Class ‘P’ (Not Easily Ignitable) | Class ‘P’ (Not Easily Ignitable) |
Mean Extent of Burn (BS: 4735 Part-7, 1971) | Less than 25 mm | Less than 25 mm |
Toxicity | --------------- | 1.0142 |
Smoke | --------------- | 780.89 |
Oxygen | --------------- | 25 |
Water Vapour Transmission (BS:4370 Part-2, 1972) | 5.84 x 10 mg-m/sN | 5.84 x 10 mg-m/sN |
Closed Cell Content | 90% (Min.) | 90% (Min.) |
Compression Strength in direction of rise | 172 KN/m (1.75 Kgf/cm ) | 172 KN/m (1.75 Kgf/cm ) |
ShreeCera Heat Guard : In addition to employing a range of insulation materials Shree Ceramic Fibers provide tailor made heat protective insulation system suitable for sophisticated equipments that require frequent maintenance. Depending upon specific application our engineers can develop and implement a high performance solution that meets your requirements. This is done by taking the unique properties of ceramics to produce heat guards that is highly adept in extreme environments, retaining characteristics of light weight and robustness. Needled ceramic fiber is the common insulation material used in our Heat Guards. Our flexible technology provides an effective and versatile solution for thermal protection in a wide range of industrial applications. Our flexible and versatile solution for thermal protection in a wide range of industrial applications. Our flexible is lightweight and easy to fit and to remove as and when required, even in a restricted & confined area. The benefits of this product include: