Ahmedabad, Gujarat, India
Our Products
Our Complete range of products are Rota Cone Vacuum Dryer, Vacuum Shelf Tray Dryer, Tray Dryer, Lab Fluid Bed Dryer and Ribbon Vacuum Mixer Dryer.
The Rota Double Cone Vacuum Dryer is suitable for drying the material which can not operate at low Temperature easily oxidized, poisonous in nature. The Double Cone Rotating Vacuum Drying Equipment is a new drier that integrates mixing and drying in the one body and equips with condenser and vacuum pump. Therefore the vacuum drier is formed. The drier is advanced in design, simple in inner structure, easy for cleaning, to discharge all raw material, convenient in operation and improving work environment. Meanwhile raw material is rotating accompanying with the rotating of container; raw materials cannot be accumulated onto the wall of container, so it has high efficiency heat transfer and high speed drying which save energy. Raw materials are dried uniformly and have good quality at low temperature. It can widely apply to dry raw materials of pharmaceuticals, chemical, Pesticides, foodstuff , dyestuff and so on industries. The equipment is in conformity with the requirements of "GMP". If the solvent does not recover, the condenser may be not used.
The Rota Cone Vacuum Drier consists of a jacketed double conical shell rotating around 6 RPM with under the state of vacuum inside the shell, pass steam or hot water in to jacket for heating. The large heating surface area presented by the internals of the cone ensures uniform drying of the product, as the product gently tumbles while the cone rotates slowly. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat. The diffusive action induced by the tumbling cone constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell, the dry speed of raw material is quickened and uniform drying efficiency is raised too. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket.
SALIENT FEATURES :
The Vacuum Shelf Tray Dryers are used to het and dry material under the state of vacuum is called vacuum drying and where difficulties in drying materials due to high toxic contents, hygroscopic in nature, heat sensitive. It is widely used in the pharmaceutical, Herbal, chemical & foodstuff.
The Vacuum Shelf Dryer is basically a tray dryer working under vacuum conditions. Its use vacuum to pump air and humidity out from the closed heat chamber due to vacuum making the chamber on the vacuum state thus increased drying rate greatly and saved energy. The boiling point of the material to be brought down for drying and the entire system is in closed loops so, no contamination occurs. The evaporation's evolved during the drying process is cooled down through a connected condenser and collected in receiver. The vacuum shelf dryer when combined with solvent extraction system, ensures that almost all of evaporating vapors is recovered and condensed in to a receiver. Vacuum shelf dryer is closed chamber with heavy structure with air lock doors, Jacketed and insulated body. Inside chamber there are shelves for resting tray. Shelves are manufactured in hollow construction with baffles cum stiffeners, inlet and outlet nozzle. Hot media is passed through the Inlet Header to each shelf, so heat transfer to the surface, which in turn heats up trays placed on the shelves. The hot media flows out from the shelves through the Outlet Header.
SALIENT FEATURES :
Tray Drying Ovens are used for drying of pharmaceutical powders, granules, Pigments, Food, Bakery, Electrodes, Chemical, and Plastic etc in an effective and economical way by hot air re-circulation.
Tray dryer is an enclosed insulated chamber in which trays are placed on top of each other. Heat transfer is done by circulation of hot air by electric heaters or any other heating media. Blower fans are installed inside to ensure proper circulation and transfer of heat.
SALIENT FEATURES :
| MODEL | Bhagwati- 24 | Bhagwati- - 48 | Bhagwati- - 96 | Bhagwati- - 192 |
| Number of Trays | 24 Trays | 48 Trays | 96 Trays | 96 Trays |
| Loading capacity | 60 kg. | 120 kg. | 240 kg. | 480 kg. |
| Blower motor Hp | 1 HP | 1 HP | 1 HP X 2 Nos | 1 HP X 4 Nos |
| Electrical Heating Load for 100°C | 6 kW | 9 kW | 15 kW | 36 kW |
| No. of Trolleys | Rack system | One | Two | Four |
| Tray Size in cm | 80 X 40 X 3 | 80 X 40 X 3 | 80 X 40 X 3 | 80 X 40 X 3 |
The Shree Bhagwati Machtech (India) Pvt. Ltd. compact NewLABOfbd- Fluid Bed Dryer model Fluid bed technology is a offer an effective and efficient method for drying and agglomerating. The Lab Fluid Bed Dryer has universal application for drying of powder and granules.
The overall concepts of the NewLABOfbd stream from similar of process based on production model and common needs of consistent processing and ease for operation and cleaning.
The Drying process: Warm air is blown through a perforated distributor to rapidly and gently dry materials until the required residual moisture content is reached. Moisture evaporated from product is exhausted with drying air.
NEW DESIGN FEATURES :
| MODEL- Lab & Pilot | BHgwati -1 |
BHgwati -5 Interchangeable Bowl |
BHgwati -15 |
| Working Capacity in Kg. | 1 | 5 | 15 |
| Total Electric Power Kw | 3.75 | 7.12 | 23.5 |
| Drying Temperature | 40 to 85° C | 40 to 85° C | 40 to 85° C |
The Ribbon Vacuum Mixer Dryer is suitable for mixing and drying the material which can not operate at low Temperature easily oxidized, poisonous in nature. It operates at low Temperature efficiently under vacuum. It is used for raw materials drying and mixing powder or granules of Pharmaceutical Materials, Crystalline, Insecticides, Pesticides, and Food industry and heat sensitive products.
The Ribbon Vacuum Mixer Dryer consists of a jacketed cylindrical shell with rotating with specially designed Double Helical Ribbon Agitator type blade by rigid fabricated structure motor, gear box. There is provision for application of vacuum inside the shell and circulation of heating media in the jacket during the rotation of the stirrer. The large heating surface area presented by the internals of the cylindrical shell ensures uniform drying of the product, as the product gently moving while the ribbon stirrer rotates. The diffusive action induced by the mixing stirrer constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket.
In operation, material is filled to the top of the outer ribbon. The shaft rotates at relatively low speed and the moving ribbons push the material back and forth mixing it. The outer ribbon rotation displaces the material from the ends to the center while the inner ribbon rotations move the material from the center to the ends. This counter-current action results in homogenous blending. Mixing is achieved in 15 to 20 minutes with 90 to 95 % or better homogeneity. The bottom discharge provided for unloading of the material and easy cleaning of the mixing drum. Specially designed self adjusting sealing arrangement of unique design is provided to ensure that no black particle enters into the mixing drum.
SALIENT FEATURES :
The Vacuum Paddle Mixer Dryer is suitable for mixing and drying the material which can not operate at low Temperature easily oxidized, poisonous in nature. It operates at low Temperature efficiently under vacuum. It is used for raw materials drying and mixing powder or granules of Pharmaceutical Materials, Crystalline, Insecticides, Pesticides, and Food industry and heat sensitive products.
The Vacuum Paddle Mixer Dryer consists of a jacketed cylindrical shell with rotating with specially designed Paddle Agitator type blade by rigid fabricated structure motor, gear box. There is provision for application of vacuumized inside the shell and circulation of heating media in the jacket during the rotation of the stirrer. The large heating surface area presented by the internals surface of the shell ensures uniform drying of the product, as the product gently moving & fluidized while the Paddle stirrer rotates. The diffusive action induced by the mixing stirrer constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket.
In operation, material is filled to the top of the shell. The shaft rotates at relatively low speed and the moving paddles push and fluidized the material back and forth mixing it. The outer Paddle rotation displaces the material from the ends to the center while the inner paddle rotations move the material from the center to the ends. This counter-current action results in homogenous blending. Mixing is achieved in 15 to 20 minutes with 90 to 95 % or better homogeneity. The bottom discharge provided for unloading of the material and easy cleaning of the mixing drum. Specially designed self adjusting sealing arrangement of unique design is provided to ensure that no black particle enters into the mixing drum.
SALIENT FEATURES :
Fluid bed dryer machines and equipment specially designed Liquid Bed Processing includes quick drying, cooling and agglomeration of particulate materials. It is perfect for warmth delicate and non heat touchy items in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
The Fluid Bed Dryer have a bed of strong particles which are fluidized by passing a surge of air upward through an extraordinarily structured punctured sheet. The upward speed of air is so kept up in order to somewhat lift the strong particles and get them under way. This movement can be used to achieve blending just as forward development of the solids particles. The air is warmed and the procedure tourist evaporates the liquid and dries the solids. Fines get agglomerated to bigger granules particles in this way giving vast size
The machine is structured with right volume of bowl, air speed, heading and the temperature of the spotless delta air is kept up all through the fluidization, hindering, and development chambers, filtration region, pitch of the punctures of the plate at the base of item holder, the watertight fluidization space by appropriate fixing, material of the channels and procedure controls with electrical and pneumatically.
The uniform drying is accomplished by uncovering the full surface of each molecule of the strong mass to the approaching high speed tourist.
Choice for the procedure parameters are constrained by utilizing most recent PLC controls with HMI contact screen along these lines making gear operationally sheltered and killing the likelihood of human blunder. The procedure consistency with group records is kept up for each clump without fail.
The gear can be inbuilt CIP framework gives an altogether cleaned hardware for each cluster disposing of tainting of ensuing groups.
STRIKINGFEATURES :
|
Container Volume Liter |
Batch Capacity Kg. |
Drying Temp. °C |
Blower Motor hp/kw |
Heating loads Kw |
Steam consumption kg/hr |
|
| Bhagwati - 30 | 100 | 30 | Atm. to 85 | |||
| Bhagwati -60 | 220 | 60 | Atm. to 85 | |||
| Bhagwati - 120 | 410 | 120 | Atm. to 85 | |||
| Bhagwati -200 | 590 | 200 | Atm. to 85 | Please contact us for more details. | ||
| Bhagwati -250 | 750 | 250 | Atm. to 85 | |||
| Bhagwati -300 | 950 | 300 | Atm. to 85 | |||
| Bhagwati -500 | 1500 | 500 | Atm. to 85 | |||
