This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose.
The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. the machine works on 440 volts A. C. , three phase electrical supply.

IS : 2386 (Part I)For determining the elongation index of coarse aggregate. It consists of a steel plate on which 8 steel pins are vertically mounted with specified distance in between. This assembly is mounted on a hardwood base. Tile Flexure Strength Tester. IS : 654-1962. For the determination of breaking load of clay roofing tiles. The equipment consists of two bearing rollers and one loading roller all 40 mm dia. The centers of bearing rollers can be set at 250 mm or 270 mm. The loading is done through a double lever loading system. Maximum capacity of the machine is 2 KN. Lever ratio is 1:12. Supplied complete with 20 kg lead shot.

IS-4031.With two glass plates and lead a transparent disc is screwed. The division of the scale on the rod weights. For indicating soundness of cement and limes. A brass cylinder mould split down one side and provided with two parallel indication arms.

INTRODUCCTION

We would like to introduce ourselves as one of the leading manufacture of Standard Test sieves under the brand name of SETHI STANDARD TEST SIEVES since from 1951 in Delhi. We are also suppliers of Equipment viz. Compression Testing Machine, Benkelman Beam, Bitumen Extractors, Rapid Moisture Meters, Liquid Limit Device, Sieve Shakers Hand Operated, Sieve Shakers Motorized, Aggregate Impact Value Apparatus, Vibrating Machines, Vibrating Table , CBR Machines, Proctor Moulds , Rammer, CBR Moulds, Sand Pouring Cylinders, Slump Cones , Gauging Trowels, Spatulas, Moisture Tins, Marshal Stability Test etc.

We hope you are the dealers for the the same and have regular requirements for the above said items. We would like to request you Please forward us your valuable enquiries. So that We may send you our best pieces at the earliest.

Vibrator is mounted over coiled springs. Vibrations are by means of a revolvingshaft with an eccentric. Frequency 12000±400 vibration per minute. Centre of gravity of the vibrator, including the cube and mould is either at the centre of the eccentric shaft or within 25 mm below it. Easy assembling and dismantling of cube mould. Provided with belt guard and a time switch. Suitable for operation in 230 volts, 50 cycles, single phase A.C. Supply.

200/Tones- hydraulic electrically-cum-hand operated, with 3 pressure gauges 0-200 tones, 0-100 tones, and 0-50 tones capacity complete with Flexure Test Attachment. MODEL DM/TG. Speed Control: The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand pumping in case of power failure. Electrical :This automatic closing of the machine shall protect the machine for overload resulting in ultimate damage. Electrical Relays are also incorporated in the electrical pumping unit, so that in case of breakdown of power supply the motor will not restart unless the starting switch is operated.
The machine is also provided with a Hand-operated Pumping Unit, so that the unit can be operated Manually.

For quick determination of moisture content of materials in powder from i.e. soil sand, coal, pottery, ganister, cement etc. A weighed quantity of the substance under test is placed in the body of the tester together with a measured quantity of absorbent and the tester is then sealed and shaken vigorously thereby bringing the sample and the absorbent into intimate contact. The pressure of gas liberated by interaction of moisture in the sample and absorbent actuates the gauge which is directly graduated in percentage moisture on the wet weight basis. A conversion chart is provided for converting percentage moisture content on the wet weight basis to percentage moisture on the dry weight basis.The unit consists of a pressure vessel with clamp for sealing cap rubber sealing gasket, dial gauge calibrated in percentage moisture content to 25 % on the wet weight basis, counter poised balance for weighing sample, scoop for measuring absorbent, bottle of absorbent, cleaning brush.
Complete in wooden carrying case with handle.The Unit can be used to determine percentage moisture contents on the wet weight basis up to 25% which is equal to 33.3% moisture content on the dry weight basis.

Proper compaction of cement concrete while casting specimens for compression testing is desirable to achieve a better and more consistent mixture. Vibrating table is ideally suited for this purpose. The table to is 500 mm x 500 mm and has stops along its edges to prevent moulds from sliding off the table during operation.
The maximum load capacity is 140 kg. The variable pitch pully arrangemant permits the frequency to be varied steplessly between 600 cycles/sec. and 430 cycles/sec. Suitable for operation 415 volts, 3 phase. 50 Hz. A.C. supply.

100 mm DIA. Three Cell ModelIS : 3085-1965.It consists of three sets 100 mm DIA cell mounted on a single control panel for testing independently three specimens 100 mm DIA x 100 mm high.

The equipment comprises the following :Three permeability cells for 100 mm dia specimen. Each cell consists of a metal cylinder with a ledge at the bottom and flanged at the top, one removable cover plate and a funnel.

Made of Gunmetal.A control panel with three independent control circuits for three permeability cell. Each control circuit consisting of a water reservoir, graduated gauge, glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm an air bleed valve, a drain crook for water reservoir and a shut-off valve for the permeability cell. A common air inlet for the three units is provided for connecting to the air compressor.(150 mm dia. Single Cell Model).IS :
3085-1965.The apparatus is CCA-58 but provided with a permeability cell for 150 mm dia x 150 mm high specimen. The equipment comprises the following :-One permeability cell for 150 mm dia specimens consisting of a metal cylinder with a ledge at the bottom and flanged at the top. One removable cover plate and a funnel. An air bleed valve is provided on the cover plate. Made of Gunmetal.-A control panel fitted with a water reservoir, graduated gauge glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm, an airbleed valve, a drain cock for water reservoir and a shut off valve for the permeability cell.

It is for the determination of the aggregate impact value and has been designed in accordance with IS-2386 (Part IV). The study construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test.

For concrete containing nominal maximum size of aggregate of 38 mm. The apparatus consists of a measuring bowl of 0.005 cm capacity. A flanged conical cover assembly fits over the bowl and can be sealed with clamps keeping a rubber gasket in between. A water inlet valve with a spray tube and an air bleed valve are fitted on the conical cover assembly. A pressure gauge is mounted on the top of the stand pipe. A hand pump is provided for the application of pressure.

Meets the requirements of IS 2720 Part V and consists of a brass bowl held on an a rubber of standard hardness by can action. Rubber feet are provided to eliminate rocking while operating. Complete with one ASTM Grooving tool and height gauge. LIQUID LIMIT DEVICE With a counter same as above, but fitted with a counter to register the number of blows. LIQUID LIMIT DEVICE Motorized approximately. Same as above, but fitted with a motor geared down to give 120 RPM.

Useful to determine specific gravity of clays, sand and gravel of size smaller than 10 mm. Specifications : Comprises a 1 kg glass jar with brass cone, locking ring and rubber seal.

For determination of resistance to wear by attrition. Two iron cylinders 77/8" dia 133/8" long with dust and water-tight covers, mounted on a shaft with their axis inclined at 30 deg. to the axis of rotation of the shaft. Rotation speed is 30-33 r.p.m. Driven by 1 h.p. three phase 440 volts, A.C. Electric motor.

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose.
The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. the machine works on 440 volts A. C. , three phase electrical supply.

IS : 2386 (Part I)For determining the elongation index of coarse aggregate. It consists of a steel plate on which 8 steel pins are vertically mounted with specified distance in between. This assembly is mounted on a hardwood base. Tile Flexure Strength Tester. IS : 654-1962. For the determination of breaking load of clay roofing tiles. The equipment consists of two bearing rollers and one loading roller all 40 mm dia. The centers of bearing rollers can be set at 250 mm or 270 mm. The loading is done through a double lever loading system. Maximum capacity of the machine is 2 KN. Lever ratio is 1:12. Supplied complete with 20 kg lead shot.

IS-4031.With two glass plates and lead a transparent disc is screwed. The division of the scale on the rod weights. For indicating soundness of cement and limes. A brass cylinder mould split down one side and provided with two parallel indication arms.

INTRODUCCTION

We would like to introduce ourselves as one of the leading manufacture of Standard Test sieves under the brand name of SETHI STANDARD TEST SIEVES since from 1951 in Delhi. We are also suppliers of Equipment viz. Compression Testing Machine, Benkelman Beam, Bitumen Extractors, Rapid Moisture Meters, Liquid Limit Device, Sieve Shakers Hand Operated, Sieve Shakers Motorized, Aggregate Impact Value Apparatus, Vibrating Machines, Vibrating Table , CBR Machines, Proctor Moulds , Rammer, CBR Moulds, Sand Pouring Cylinders, Slump Cones , Gauging Trowels, Spatulas, Moisture Tins, Marshal Stability Test etc.

We hope you are the dealers for the the same and have regular requirements for the above said items. We would like to request you Please forward us your valuable enquiries. So that We may send you our best pieces at the earliest.

Vibrator is mounted over coiled springs. Vibrations are by means of a revolvingshaft with an eccentric. Frequency 12000±400 vibration per minute. Centre of gravity of the vibrator, including the cube and mould is either at the centre of the eccentric shaft or within 25 mm below it. Easy assembling and dismantling of cube mould. Provided with belt guard and a time switch. Suitable for operation in 230 volts, 50 cycles, single phase A.C. Supply.

200/Tones- hydraulic electrically-cum-hand operated, with 3 pressure gauges 0-200 tones, 0-100 tones, and 0-50 tones capacity complete with Flexure Test Attachment. MODEL DM/TG. Speed Control: The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand pumping in case of power failure. Electrical :This automatic closing of the machine shall protect the machine for overload resulting in ultimate damage. Electrical Relays are also incorporated in the electrical pumping unit, so that in case of breakdown of power supply the motor will not restart unless the starting switch is operated.
The machine is also provided with a Hand-operated Pumping Unit, so that the unit can be operated Manually.

For quick determination of moisture content of materials in powder from i.e. soil sand, coal, pottery, ganister, cement etc. A weighed quantity of the substance under test is placed in the body of the tester together with a measured quantity of absorbent and the tester is then sealed and shaken vigorously thereby bringing the sample and the absorbent into intimate contact. The pressure of gas liberated by interaction of moisture in the sample and absorbent actuates the gauge which is directly graduated in percentage moisture on the wet weight basis. A conversion chart is provided for converting percentage moisture content on the wet weight basis to percentage moisture on the dry weight basis.The unit consists of a pressure vessel with clamp for sealing cap rubber sealing gasket, dial gauge calibrated in percentage moisture content to 25 % on the wet weight basis, counter poised balance for weighing sample, scoop for measuring absorbent, bottle of absorbent, cleaning brush.
Complete in wooden carrying case with handle.The Unit can be used to determine percentage moisture contents on the wet weight basis up to 25% which is equal to 33.3% moisture content on the dry weight basis.

Proper compaction of cement concrete while casting specimens for compression testing is desirable to achieve a better and more consistent mixture. Vibrating table is ideally suited for this purpose. The table to is 500 mm x 500 mm and has stops along its edges to prevent moulds from sliding off the table during operation.
The maximum load capacity is 140 kg. The variable pitch pully arrangemant permits the frequency to be varied steplessly between 600 cycles/sec. and 430 cycles/sec. Suitable for operation 415 volts, 3 phase. 50 Hz. A.C. supply.

100 mm DIA. Three Cell ModelIS : 3085-1965.It consists of three sets 100 mm DIA cell mounted on a single control panel for testing independently three specimens 100 mm DIA x 100 mm high.

The equipment comprises the following :Three permeability cells for 100 mm dia specimen. Each cell consists of a metal cylinder with a ledge at the bottom and flanged at the top, one removable cover plate and a funnel.

Made of Gunmetal.A control panel with three independent control circuits for three permeability cell. Each control circuit consisting of a water reservoir, graduated gauge, glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm an air bleed valve, a drain crook for water reservoir and a shut-off valve for the permeability cell. A common air inlet for the three units is provided for connecting to the air compressor.(150 mm dia. Single Cell Model).IS :
3085-1965.The apparatus is CCA-58 but provided with a permeability cell for 150 mm dia x 150 mm high specimen. The equipment comprises the following :-One permeability cell for 150 mm dia specimens consisting of a metal cylinder with a ledge at the bottom and flanged at the top. One removable cover plate and a funnel. An air bleed valve is provided on the cover plate. Made of Gunmetal.-A control panel fitted with a water reservoir, graduated gauge glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm, an airbleed valve, a drain cock for water reservoir and a shut off valve for the permeability cell.

It is for the determination of the aggregate impact value and has been designed in accordance with IS-2386 (Part IV). The study construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test.

For concrete containing nominal maximum size of aggregate of 38 mm. The apparatus consists of a measuring bowl of 0.005 cm capacity. A flanged conical cover assembly fits over the bowl and can be sealed with clamps keeping a rubber gasket in between. A water inlet valve with a spray tube and an air bleed valve are fitted on the conical cover assembly. A pressure gauge is mounted on the top of the stand pipe. A hand pump is provided for the application of pressure.

Meets the requirements of IS 2720 Part V and consists of a brass bowl held on an a rubber of standard hardness by can action. Rubber feet are provided to eliminate rocking while operating. Complete with one ASTM Grooving tool and height gauge. LIQUID LIMIT DEVICE With a counter same as above, but fitted with a counter to register the number of blows. LIQUID LIMIT DEVICE Motorized approximately. Same as above, but fitted with a motor geared down to give 120 RPM.

Useful to determine specific gravity of clays, sand and gravel of size smaller than 10 mm. Specifications : Comprises a 1 kg glass jar with brass cone, locking ring and rubber seal.

For determination of resistance to wear by attrition. Two iron cylinders 77/8" dia 133/8" long with dust and water-tight covers, mounted on a shaft with their axis inclined at 30 deg. to the axis of rotation of the shaft. Rotation speed is 30-33 r.p.m. Driven by 1 h.p. three phase 440 volts, A.C. Electric motor.