Loading Unit:- Vertical load, capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load for the applied either througe a steel ball recessed in the loading pad or directly through a base of the loading yoke. shear load capacity 400 kg.
Direct shear box for square specimen size 60X60X25 mm complete with one base plate, two plane gripper plates, porous stones and one loading pad. shear box housing, complete with two ball roller strips. Specimen cutter for 60X60X25 mm specimen.

For determination of resistance to wear of coarse aggregate by abrasion. A rolled steel drum totally closed except for removable dust-tight cover is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. The drum is rotated by one h.p. electric motor. A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 r.p.m. Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests. Supplied with 12 abrasive charges 1 7/8" dia and Revolution Counter fitted to the rotating shaft.

1203. IS 310 (Part II). For testing a wide variety of materials such as grease, bitumen, tar , wax, polish, food stuffs, rubber, asphalt and pharmaceu-tical creams. By applying a given force over a given period of time depression is made in the sample which may be measured in tenths of a millimeter and expressed as a penetration number.

Laboratory Concrete Mixer is laboratory type & is electrically operated. The counter balance drum is easy to tilt with 1½ to 2 cu .ft. mix. The total drum volume is, however, 3 cu. ft. Mounted on a sturdy rubber tyred stand; the drum is mounted for end discharge and equipped with 1/2 h. p. electric motor, suitable for operation on 220 volts. A. C. single phase.

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a vicat mould in the form of the frustum of a cone, (80+5)/70 + 5mm dia at the base, (70mm+5mm) /60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus.

It is high pressure autoclave designed especially for conducting acceleraed soundness tests on Cement or the autoclave expansion tests. It is mounted in a sturdy supporting frame, and enclosed in a heat- insulated / metal housing which is attractively finished in hammertone paint.
The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switches and pilot lights for controlling the electric heating unit.

Confirming to ISS-7320. This apparatus used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts. A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base. A graduated tamping rod is used both for compacting the specimen as well as measuring the slump of concrete.

 Loading Unit:- Vertical load, capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load for the applied either througe a steel ball recessed in the loading pad or directly through a base of the loading yoke. shear load capacity 400 kg.
Direct shear box for square specimen size 60X60X25 mm complete with one base plate, two plane gripper plates, porous stones and one loading pad. shear box housing, complete with two ball roller strips. Specimen cutter for 60X60X25 mm specimen.

For determination of resistance to wear of coarse aggregate by abrasion. A rolled steel drum totally closed except for removable dust-tight cover is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. The drum is rotated by one h.p. electric motor. A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 r.p.m. Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests. Supplied with 12 abrasive charges 1 7/8" dia and Revolution Counter fitted to the rotating shaft.

1203. IS 310 (Part II). For testing a wide variety of materials such as grease, bitumen, tar , wax, polish, food stuffs, rubber, asphalt and pharmaceu-tical creams. By applying a given force over a given period of time depression is made in the sample which may be measured in tenths of a millimeter and expressed as a penetration number.

Laboratory Concrete Mixer is laboratory type & is electrically operated. The counter balance drum is easy to tilt with 1½ to 2 cu .ft. mix. The total drum volume is, however, 3 cu. ft. Mounted on a sturdy rubber tyred stand; the drum is mounted for end discharge and equipped with 1/2 h. p. electric motor, suitable for operation on 220 volts. A. C. single phase.

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a vicat mould in the form of the frustum of a cone, (80+5)/70 + 5mm dia at the base, (70mm+5mm) /60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus.

It is high pressure autoclave designed especially for conducting acceleraed soundness tests on Cement or the autoclave expansion tests. It is mounted in a sturdy supporting frame, and enclosed in a heat- insulated / metal housing which is attractively finished in hammertone paint.
The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switches and pilot lights for controlling the electric heating unit.

Confirming to ISS-7320. This apparatus used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts. A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base. A graduated tamping rod is used both for compacting the specimen as well as measuring the slump of concrete.