Shree Ashutosh Industries

GIDC, Rajkot, Gujarat

Model Size Shaft Dia (mm) C.I. Wheel M.S.Wheel Dia (mm) Frame IC Sec (mm) DiameterSAIR 1 4 Feet 50 450 150 X 75 80 to 300 mmSAIR 2 2 Meter 65 525 200 X 100 80 to 300 mmSAIR 3 2.5 Meter 65 525 200 X 100 80 to 300 mmSAIR 4 2.5 Meter 75 600200 X 100 300 to 900 mmSAIR 5 2.5 Meter 100 750 300 X 140 300 to 1200 mmSAIR 6 2.5 Meter 125 850 300 X 140450 to 1600 mmSAIR 7 2.5 Meter 150 900 450 x 160600 to 2600 mm

SAIPT 1 : For 2 meter up to 300mm dia. pipe with hand pressure pump, pressure gauge screw type.SAIPT 2 : For 2.5 meter up to 1200mm dia. pipe with hand pressure pump, pressure gauge screw type, hydraulic hand operated, hydraulic motor operate.

* Load Testing Machine:- Three Edge Load Testing Machine Complete with* Hand Operated Hydraulic Jack, Pressure Gauge.Suitable to test Pipe of all classes* upto 1200mm diameter, 2.5 meter length with suitable frame.* It is also avalable in One Jack, Two Jack and Three Jack Model.

Model Shaft Dia (mm) Frame C sec. (mm) DiameterSAIGB 1 65 100 x 50 100 to 1200 mmSAIGB 2 75 125 x 165 600 to 2400 mm

At SAI, to meet the various needs of our clients, we provide a comprehensive selection of RCC Pipe Moulds.

Outfitted with a modern infrastructure we make high-quality moulds with STEEL RINGS utilising the highest quality raw materials and cutting-edge technologies that are both robust and low-maintenance and we provide a broad range of RCC Pipe Mould to satisfy the demands of our customers.

Description

Plane ending Flush joint, Male-Female joint, Spigot & Socket joint types are all available.

MS Sheet/Plate, Angle/Flat, Tie-Rods, Nut-Bolts, and MS Fabricated Rings are all included in the moulds.

All moulds are made according to Indian Standard.

There are two lengths available: 2 meter & 2.5-meter length is available as per IS 458 & Customer Requirement

• All Class of Moulds Are Available in Plane Ended, Flush Joint, Spigot, Socket & R.R. Joint
• Moulds are Complete with M.S. Sheet/Plate, Angle/Flat, Tie rods, Nut bolts, C.I. End rings or M.S. Endings R.R. Joint

(Note: Rings can be made from M.S. Casting - Not Fabricated)

The Reinforced cage is first prepared on the collapsible reinforcing machine by hand process. The cage is then placed inside the pipe mould, which is then hoisted up and mounted horizontally on the Runner machine. It is rotated by 'speed variater Machine. The rotation is kept slow in the beginning and then the speed is increased. The concrete mixture is prepared material by mixing cement stone, metal and sends respectively. The cement concrete is fed into the moulds during rotation, which spreads inside evenly. The time required for completion of this operation depends upon the diameter and class of the pipe. The pipes are kept mould for 24 hours. On the following day the pipes are removed from the moulds and submersed in water in the curing tank for about 15-20 days depending upon the class of the pipe

The Reinforced cage is first prepared on the collapsible reinforcing machine by hand process. The cage is then placed inside the pipe mould, which is then hoisted up and mounted horizontally on the Runner machine. It is rotated by 'speed variater Machine. The rotation is kept slow in the beginning and then the speed is increased. The concrete mixture is prepared material by mixing cement stone, metal and sends respectively. The cement concrete is fed into the moulds during rotation, which spreads inside evenly. The time required for completion of this operation depends upon the diameter and class of the pipe. The pipes are kept mould for 24 hours. On the following day the pipes are removed from the moulds and submersed in water in the curing tank for about 15-20 days depending upon the class of the pipe