Used for removing surface residual magnetism.

• Operate on 220V single phase AC supply.
• Suitable for all types of steel such as HSS, Nickel chrome, spring steel, die steel etc.
• Foot switch for easy & safely operation.
• Fibre top allows scratch free demagnetization.

Features

• Used for removing surface residual magnetism of round & square jobs
• Operate on 415 volt 2 phase A/c Supply
• Suitable for continuous duty cycle
• Current 10 amps
• Fiber body is used for scratch free demagnetizing
• MCB is provided for safety
• Special sizes are manufactured as per requirement

Used for removing surface residual magnetism of round & cylindrical jobs.

• Operate on 220V single phase AC supply.
• Suitable for all types of steel such as HSS, Nickel chrome, spring steel, die steel etc.
• Foot switch for easy & safely operation.
• Fiber body allows scratch free demagnetization.

Industries Using Magnetic Rod

• Plastic
• Food Products. (Sugar, Coffee, Tea, Grains, Pulses, Flour, Spices, Milk etc.)
• Pharmaceutical
• Chemical
• Ceramic
• Colors / Paints
• Pigments
• Ink
• Refractory

General Information

• Magnetic Rods in Diameter other that 27mm also available.
• Tapping M8 x 15 mm deep can be provided at one end OR both end as desired.
• Can be supplied is SS 316 also.
• Easy clean rods are available.
• Long heavy duty rods for chain type coolant systems are available.
• Customized rods designs available.
• Low intensity magnetic rods have Gauss values 2, 500 and High Intensity Magnetic Rods have a Gauss value of 10, 500.
• Rods with intermediate Gauss values are also available.
• Medium and High intensity magnetic Rods with Maximum operating temperature of 200?C available.

The Sintered NDFeB Magnet manufactured by us is a high quality and high performance magnet from the rare earth class of magnets. This magnet manufactured by using many ingredients, out of which the primary ingredients are neodymium (Nd), iron (Fe), and boron (B). This magnet is not suitable for high temperature applications. The magnetic properties of this magnet are very high in comparison to its price. These magnets are generally manufactured by us in large block shapes as well as according to customized needs. The coating is applied over the magnet only after taking into consideration the environment in which it is to be used.

Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines Accuracy as per ISa : 4816 - 1987 Assembled with powerful Magnets Poles individually magnetized for full loading power Magnetic Pull is 40-70% more than IS specification Bottom plate has suitable extension to clamp on table Easy operated ON-OFF lever.

Application

• Magnetic plates are extensively used in CTC Tea machinery and in Biscuit stacking machines. They are also used for separating trapped iron in industries such as:
• Food (Tea, Spices, Coffee, Cocoa, Milk Powder etc.)
• Tobacco
• Chemicals
• Fertilizers
• Pharmaceuticals
• Foundry Sand
• Cattle Feed Materials
• Minerals
• Detergents
• Conveying of light weight tin containers
• Conveying of M.S. sheets using multiple plates

How Does it Work?Lighter Strength Plate Magnets offer cost-effective choices for applications with lower product flow rate, lower conveyor speeds, or thinner burden depths. High Strength Magnetic Plates with Strontium Ferrite Magnets / Rare Earth magnets can attract metal particles from thin layers of product conveyed on flat belts from distance of 6”.
Attract ferrous tramp from flat-belt.Powerful Ceramic magnet reaches deep into conveyed material upto 6”.
Threaded holes are provided for easy mounting of these plates with other convenient option.For Iron Removal, Magnetic Plates are generally located above the material flow attracting the iron particles. The Magnetic Separation Process involves the magnetic field penetrating the product flow and grabbing tramp iron as it passes by the Plate. The concentrated field holds tramp iron tightly to the magnet surface until removed during the cleaning process. For Separating of Ferromagnetic material like Tin/M.S. sheets and containers from conveyor belts, multiple Magnetic Plates at various locations are used. This prevents the falling off of sheets/containers back into the conveyor.

Features

• Efficient cost-saving recovery of harmful tramp iron in free-flowing materials
• Plate magnets can be mounted both, above and below the product flow
• Magnets like ceramic or rare earth magnets are normally used in plate
• Magnetic separators capture maximum common ferrous debris
• Durable stainless steel construction
• For easy cleaning, hinged plates can be swung out
• The Plate Magnets can be cleaned manually also
• Simple to install and have no maintenance
• Lightweight and user-friendly

There are two Types of Plate Magnets

• High Strength Magnetic Plates - (NdFeb Magnet – 4500 Gauss)
• Low Strength Magnetic Plates - (Ferrite Magnet – 1200 Gauss)

ConstructionMagnetic Plates are available in flat and curved shape with required dimensions.The magnetic plates are made of either Ferrite or NdFeb magnets depending upon the required flux intensity. The magnetic surface is of Stainless Steel 304/316.

Specification

• The compact design of these powerful magnetic separators makes them simple
• Standard installations involve hinged models for swing–open cleaning
• Plate Type Suspended Magnets are also available without hinges for stationary or suspended installations
• Rare Earth is standard for food and pharmaceutical applications where product purity is paramount

Information Required for Design of Magnetic Plates

• Type of material
• Flow rate
• Size and concentration of contamination
• Flow passage dimensions

• Holding device for Rotary surface grinding and also for Lathe & cylindrical grinding machines.
• Accuracy as per IS : 4816- 1987
• Magnetic pullis 20-40% more than IS specification.
• Assembled with Powerful Magnets.
• On-Off by key

Used for removing surface residual magnetism.

• Operate on 220V single phase AC supply.
• Suitable for all types of steel such as HSS, Nickel chrome, spring steel, die steel etc.
• Foot switch for easy & safely operation.
• Fibre top allows scratch free demagnetization.

Features

• Used for removing surface residual magnetism of round & square jobs
• Operate on 415 volt 2 phase A/c Supply
• Suitable for continuous duty cycle
• Current 10 amps
• Fiber body is used for scratch free demagnetizing
• MCB is provided for safety
• Special sizes are manufactured as per requirement

Used for removing surface residual magnetism of round & cylindrical jobs.

• Operate on 220V single phase AC supply.
• Suitable for all types of steel such as HSS, Nickel chrome, spring steel, die steel etc.
• Foot switch for easy & safely operation.
• Fiber body allows scratch free demagnetization.

Industries Using Magnetic Rod

• Plastic
• Food Products. (Sugar, Coffee, Tea, Grains, Pulses, Flour, Spices, Milk etc.)
• Pharmaceutical
• Chemical
• Ceramic
• Colors / Paints
• Pigments
• Ink
• Refractory

General Information

• Magnetic Rods in Diameter other that 27mm also available.
• Tapping M8 x 15 mm deep can be provided at one end OR both end as desired.
• Can be supplied is SS 316 also.
• Easy clean rods are available.
• Long heavy duty rods for chain type coolant systems are available.
• Customized rods designs available.
• Low intensity magnetic rods have Gauss values 2, 500 and High Intensity Magnetic Rods have a Gauss value of 10, 500.
• Rods with intermediate Gauss values are also available.
• Medium and High intensity magnetic Rods with Maximum operating temperature of 200?C available.

The Sintered NDFeB Magnet manufactured by us is a high quality and high performance magnet from the rare earth class of magnets. This magnet manufactured by using many ingredients, out of which the primary ingredients are neodymium (Nd), iron (Fe), and boron (B). This magnet is not suitable for high temperature applications. The magnetic properties of this magnet are very high in comparison to its price. These magnets are generally manufactured by us in large block shapes as well as according to customized needs. The coating is applied over the magnet only after taking into consideration the environment in which it is to be used.

Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines Accuracy as per ISa : 4816 - 1987 Assembled with powerful Magnets Poles individually magnetized for full loading power Magnetic Pull is 40-70% more than IS specification Bottom plate has suitable extension to clamp on table Easy operated ON-OFF lever.

Application

• Magnetic plates are extensively used in CTC Tea machinery and in Biscuit stacking machines. They are also used for separating trapped iron in industries such as:
• Food (Tea, Spices, Coffee, Cocoa, Milk Powder etc.)
• Tobacco
• Chemicals
• Fertilizers
• Pharmaceuticals
• Foundry Sand
• Cattle Feed Materials
• Minerals
• Detergents
• Conveying of light weight tin containers
• Conveying of M.S. sheets using multiple plates

How Does it Work?Lighter Strength Plate Magnets offer cost-effective choices for applications with lower product flow rate, lower conveyor speeds, or thinner burden depths. High Strength Magnetic Plates with Strontium Ferrite Magnets / Rare Earth magnets can attract metal particles from thin layers of product conveyed on flat belts from distance of 6”.
Attract ferrous tramp from flat-belt.Powerful Ceramic magnet reaches deep into conveyed material upto 6”.
Threaded holes are provided for easy mounting of these plates with other convenient option.For Iron Removal, Magnetic Plates are generally located above the material flow attracting the iron particles. The Magnetic Separation Process involves the magnetic field penetrating the product flow and grabbing tramp iron as it passes by the Plate. The concentrated field holds tramp iron tightly to the magnet surface until removed during the cleaning process. For Separating of Ferromagnetic material like Tin/M.S. sheets and containers from conveyor belts, multiple Magnetic Plates at various locations are used. This prevents the falling off of sheets/containers back into the conveyor.

Features

• Efficient cost-saving recovery of harmful tramp iron in free-flowing materials
• Plate magnets can be mounted both, above and below the product flow
• Magnets like ceramic or rare earth magnets are normally used in plate
• Magnetic separators capture maximum common ferrous debris
• Durable stainless steel construction
• For easy cleaning, hinged plates can be swung out
• The Plate Magnets can be cleaned manually also
• Simple to install and have no maintenance
• Lightweight and user-friendly

There are two Types of Plate Magnets

• High Strength Magnetic Plates - (NdFeb Magnet – 4500 Gauss)
• Low Strength Magnetic Plates - (Ferrite Magnet – 1200 Gauss)

ConstructionMagnetic Plates are available in flat and curved shape with required dimensions.The magnetic plates are made of either Ferrite or NdFeb magnets depending upon the required flux intensity. The magnetic surface is of Stainless Steel 304/316.

Specification

• The compact design of these powerful magnetic separators makes them simple
• Standard installations involve hinged models for swing–open cleaning
• Plate Type Suspended Magnets are also available without hinges for stationary or suspended installations
• Rare Earth is standard for food and pharmaceutical applications where product purity is paramount

Information Required for Design of Magnetic Plates

• Type of material
• Flow rate
• Size and concentration of contamination
• Flow passage dimensions

• Holding device for Rotary surface grinding and also for Lathe & cylindrical grinding machines.
• Accuracy as per IS : 4816- 1987
• Magnetic pullis 20-40% more than IS specification.
• Assembled with Powerful Magnets.
• On-Off by key