Our Products

Steel Elbow 12 Products available
Steel Flanges 11 Products available
Pipe Tees 9 Products available
Pipe Flanges 9 Products available
Flanges 8 Products available
Stainless Steel Plates 6 Products available
Flanges, Flanged Fittings & Accessories 6 Products available
Stainless Steel Tee 5 Products available
Pipe Elbows 5 Products available
Pipe Reducer 5 Products available
Others Products 71 Products available

Pipe Flanges

Our Complete range of products are Lap Joint Flange, Ring Type Joint Flange, GI Puddle Flange, Puddle Flange and Slip On Flange.

Lap Joint Flange

₹ 355 - ₹ 500 /Piece Get Latest Price

Min. Order (MOQ) 10 PIECE
Shape Round
Material Stainless Steel
Size 1/2 to 48 Inch (As Per Customer Requirement)
Material Standard ASTM A105
Surface Treatment Polished
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc

Lap Joint flanges have certain special advantages over other flanges. These are as follows:

Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes.
Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges.
In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use.
The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges.
The Lap Joint works as a backing ring on the stub.
The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed.
They allow rotational alignment capability.

Value Added Services:

Hot Dip Galvanizing
Electro Polish
Test Certificate As Per EN 10204 – 3.1 & 3.2

Material Grade

Carbon Steel Lap Joint Flange	ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Lap Joint Flange	A350 LF2/A350 LF3
Copper Alloys Lap Joint Flange	ASTM / ASME SB 61 / 62 / 151 / 152 C 70600 (CU -NI- 90/10 C 71500 (CU -NI- 70/30) UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100 C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Lap Joint Flange	Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Lap Joint Flange	ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61
Stainless Steel Lap Joint Flange	ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Lap Joint Flange	ASTM SA 182 F1/F5/F9/F11/F22/F91

View Complete Details

Ask Latest Price & Details

Ring Type Joint Flange

₹ 2,500 - ₹ 3,000 /PIECE Get Latest Price

Min. Order (MOQ) 5 PIECE
Shape Oval
Material Steel
Flange Type Weld Neck
Specialities Strong Construction, Fine Quality, Durable
Finishing Polished

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Size : 1/2″ (15 NB) to 48″ (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6, 10, 16, 25, 40 Etc.

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629,
DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
BS : BS4504 , BS4504, BS1560, BS10

Flange Face Type : Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Material & Grades of Ring Type Joint Flanges (RTJ)

Stainless Steel Ring Type Joint Flanges :ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex & Super Duplex Steel Ring Type Joint Flanges :ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Ring Type Joint Flanges :ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Ring Type Joint Flanges : ASTM A350, LF2, LF3

Alloy Steel Ring Type Joint Flanges :ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Copper Alloy Steel Ring Type Joint Flanges :

ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Nickel Alloy Ring Type Joint Flanges :ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNSNo. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No.N10276), Alloy 20 (UNS No. N08020)

View Complete Details

Ask Latest Price & Details

Gi Puddle Flange

Material Iron
Finishing Non Polished
Flange Type Plain
Color Silver
Technics Casting
Country of Origin India

View Complete Details

Ask Latest Price & Details

Puddle Flange

₹ 550 - ₹ 800 /Kilogram Get Latest Price

Min. Order (MOQ) 10 PIECE
Material Steel
Shape Round
Technics Casting
Usage Industry Use
Finishing Non Polished, Mill Finish
Packaging Type Shrink Wrapping

Details

Size	½” (15 NB) to 48″ (1200NB)
Standards	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings	Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 \| PN6, PN10, PN16, PN25, PN40, PN64 etc.
Type	Blind Flanges Exporter, Screwed Flanges, Weld Neck Flanges, Lapped joint Flanges, Reducing Flanges

Product Specification

ASME B16.5 Puddle Flanges Size Chart	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Puddle Flanges Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
GI Puddle Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Puddle Flanges
Carbon Steel Puddle Flange Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Puddle Flanges
Mild Steel Puddle Flange JIS	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Puddle Flanges
Stainless Steel Puddle Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar Puddle Flanges
GI Puddle Flanges EN	6Bar 10Bar 16Bar 25Bar 40Bar Puddle Flanges
Copper Nickel Puddle Flange Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Puddle Flanges
Nickel Alloys Puddle Flange Most common types of Puddle Flanges	Forged / Threaded / Screwed / Plate
Alloys Steel Puddle Flange Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Carbon Alloys Puddle Flange Production technique	Forged, Heat treated and machined
Both Side Puddle Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
One Side Puddle Flange Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2″) to 200 NB (8″) Equal and Reducing Configurations
Sleeve Puddle Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Threaded Puddle Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Hot Dip Galvanizing Origin	Indian / West Europe / Japan / USA / Korean
PVC Puddle Flange Manufacturer of	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. Puddle Flanges: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Puddle Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Puddle Flanges Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Puddle Flange Sizes Range	1/2″ – 72″ 21.30 MM – 1828.80 MM
Type of Puddle Flange	Both side Puddle Flange One side Puddle Flange Sleeve Puddle Flange Threaded Puddle Flange
Inspection & Test Report	Dye Penetrant Inspection DP Test PT Test DPI Test LPI Test Welding DP Test Hydro Test Radiography Test Welding RT & NDT
Hot Dip Galvanizing(Hot Dip GI)	GI 80 – 120 Micron GI 120 – 160 Micron Hot Dip GI 80 – 120 % Zink Hot Dip GI 120 – 160 % Zink.
Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc

View Complete Details

Ask Latest Price & Details

Slip On Flange

₹ 50 - ₹ 50 /Piece Get Latest Price

Min. Order (MOQ) 10 PIECE
Shape Round
Material Alloy Steel
Size 1/2 to 60 Inch (As Per Customer Requirement)
Packing Type Box
Surface Treatment Polished
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc.
No of Holes 8

View Complete Details

Ask Latest Price & Details

Alloy Steel Threaded Flange

Min. Order (MOQ) 500 Piece
Material Alloy Steel
Finishing Polished
Shape Round
Condition New
Color Silver
Application Plumbing Pipes
Feature Perfect Shape, High Strength
Type Alloy Steel Flanges
Country of Origin India
Flange Type Threaded Flange

View Complete Details

Ask Latest Price & Details

Reducing Flange

₹ 185 - ₹ 215 /Kilogram Get Latest Price

Min. Order (MOQ) 100 PIECE
Shape Round
Material Stainless Steel
Technics Forged
Size 5-10 inch
Material Standard ANSI B16.5
Material Grade DIN 1.4539

Size : 1/2″ (15 NB) to 48″ (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6, 10, 16, 25, 40 Etc.

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629,
DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
BS : BS4504 , BS4504, BS1560, BS10

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Material & Grades of Reducing Flanges

Stainless Steel Reducing Flanges :ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex & Super Duplex Steel Reducing Flanges :ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Reducing Flanges :ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Reducing Flanges : ASTM A350, LF2, LF3

Alloy Steel Reducing Flanges :ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Copper Alloy Steel Reducing Flanges :

ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C
71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Nickel Alloy Reducing Flanges :

ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS
No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel
600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No.
N10276), Alloy 20 (UNS No. N08020)

Features:

Durable
Corrosion resistance.
High strength.
Dimensional accuracy.
Quality assured
Sleek design
Safe to use

View Complete Details

Ask Latest Price & Details

Steel Lap Joint Flanges

Material Stainless Steel
Surface Finishing Polished
Shape Round
Color Silver
Packaging Type Box
Type Stainless Steel Flanges
Country of Origin India

View Complete Details

Ask Latest Price & Details

Stainless Steel Slip On Flange

Min. Order (MOQ) 500 Piece
Material Stainless Steel
Surface Finishing Polished
Shape Round
Color Shiny Silver
Usage Industrial Use
Size 5-10 inch
Country of Origin India
Rust Proof Yes

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Mr. Rajeev Dewasi (Shree Vinayak Metal & Tube)
43/45, Pavwala Building, Ground Floor, Office No.101, Opp. Durga Devi Garden, 3rd Kumbharwada Lane, Mumbai, Maharashtra - 400004
Share us via
Found Something Wrong with this Listing? Report Here.