GST : 24ADYPB7374F1Z9
Verified
Write a Review
Our Product / Services
Cement
2 Products availableCoal & Charcoal
2 Products availableSand
2 Products availableIron & Metal Alloys
1 Products availableSoil Additives & Fertilizers
1 Products availableCrucibles
1 Products availableCoal
1 Products availableFilters
1 Products availableBricks
1 Products availableOur offered Product range includes High Purity Dense Castables, Insulating Castables, Low Cement Castables, medium purity dense castables and Red Ocher.
Properties
| PARTICULARS | DAT-HEAT A | DAT-HEAT M | DAT-HEAT K | DAT-HEAT C | DAT-HEAT A(Super) | DAT-HEAT K(Spl) | DAT-HEAT C(Spl) | DAT-HEAT 94 | DAT-HEAT 97 |
|---|---|---|---|---|---|---|---|---|---|
| GENERAL PROPERTIES | |||||||||
| Service Temp. °C (Max) | 1750 | 1700 | 1600 | 1500 | 1750 | 1600 | 1500 | 1800 | 1850 |
| Grain Size mm (Max) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Water Required for Casting (%) | 43321 | 9.0-10.5 | 43384 | 43384 | 43321 | 43384 | 43384 | 8.5-9.5 | 8.5-9.5 |
| CHEMICAL PROPERTIES | |||||||||
| Al2O3 (Min.) | 90 | 80 | 60 | 50 | 90 | 60 | 50 | 94 | 96 |
| Fe2O3 (Max) | 0.8 | 1.5 | 1 | 1.3 | 0.8 | 1 | 1.3 | 0.3 | 0.3 |
| PHYSICAL PROPERTIES | |||||||||
| Bulk Density (kg/m3) (Max) Bulk Density ( kg/m3) (dried at 1100C for 24 hrs.) (Min.) | 2.75 | 2.6 | 2.2 | 2.1 | 2.85 | 2.1 | 2.1 | 2.8 | 2.8 |
| Cold Crushing Strength ( kg/cm2) 110°C | 600 | 550 | 350 | 350 | 850 | 450 | 400 | 600 | 400 |
| 1100°C 3 hrs | 330 | 380 | 230 | 220 | 450 | 250 | 260 | 450 | 250 |
| 1550°C 3 hrs | 650 | 600 | 520 | 500 | 700 | 550 | 550 | 750 | 400 |
| THERMAL PROPERTIES | |||||||||
| Refractoriness°C (Min) | 1820 | 1804 | 1683 | 1665 | 1820 | 1683 | 1665 | 1835 | 1835 |
| Permanent Linear Change (%) (temp. x 3 hrs.) at 1550°C (Max) | ±1.00 (1550°C) | ±1.00 (1550°C) | ±1.50 (1550°C) | ±1.00 (1550°C) | ±0.70 (1550°C) | ±1.50 (1550°C) | ±1.00 (1550°C) | ±0.50 (1550°C) | ±0.80 (1550°C) |
NOTE
All tests carried out as per BIS 10570-1983.
Supply can be also made as per Customer requirement.
We Provide Optimum Refractory Castables that are Commonly Used for Hot Face and Back Up Linings. Our High Alumina Refractory Castables are Highly Appreciated for Low Thermal Conductivity and Low Density that Assists in Conserving Heat Energy. Low Concentration of Iron in Our Insulating Refractory Castables Makes Them Perfect for Various Industries. We Offer Insulating Refractory Castables At Very Affordable Prices Within the Specified Time Frame. We have Carved a Niche as One of the Moving Ahead Insulating Refractory Castables Manufacturers and Suppliers Based in India.
Application
Iron and steel Industry for lining blast furnaces and for skew backs, ports and roof lining of arc – melting furnaces
For Lining of pre heaters / Converters and on all transfer lines.
Coke basis gas production plants as well as gasification plants
Blast furnaces, Foundries
Boiler industry stoker arches
Locations where reducing atmospheres are encountered.
Construction of soak pit covers, forge furnaces, tunnel kilns, heat treatment
furnace car tops as well as electro-phosphorus furnaces.
Iron and steel industry, Semi-permanent foundries, Annealing furnaces
Stress relieving furnaces, boilers
Product Details
| PARTICULARS | DAT-CAST 4 | DAT-CAST 9 | DAT-CAST 11 | DAT-CAST 13 | DAT-CAST 15 | DAT-CAST 11 Li | DAT-CAST 13 Li | DAT-CAST 15 Li | |
|---|---|---|---|---|---|---|---|---|---|
| GENERAL PROPERTIES | |||||||||
| Service Temp.°C (Max) | 1000 | 1100 | 1200 | 1300 | 1350 | 1350 | 1350 | 1400 | 1400 |
| Grain Size mm (Max) | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Water Required for Casting (%) | 80-100 | 60-65 | 40-45 | 29-34 | 26-31 | 23-28 | 30-35 | 27-32 | 23-28 |
| CHEMICAL PROPERTIES (%) | |||||||||
| Fe2O3 (Max) | 11 | 8.5 | 6 | 3.5 | 3.5 | 3.2 | 1.5 | 1.5 | 1.5 |
| PHYSICAL PROPERTIES | |||||||||
| Bulk Density ( kg/m3) (Max) After drying at 110°C for 24 hrs. | 550 | 850 | 1000 | 1250 | 1450 | 1600 | 1250 | 1450 | 1600 |
| Cold Crushing Strength (kg/cm2) 110°C | 4 | 12 | 15 | 35 | 50 | 90 | 45 | 80 | 130 |
| 800°C | 2 | 4 | 6 | 25 | 30 | 60 | 30 | 40 | 75 |
| 1100°C | - | 6 | 10 | 25 | 30 | 60 | 30 | 40 | 75 |
| 1300°C | - | - | - | 40 | 50 | 70 | 50 | 50 | 90 |
| THERMAL PROPERTIES | |||||||||
| Refractoriness°C (Min) | - | 1337 | 1398 | 1398 | 1398 | 1430 | 1398 | 1430 | 1430 |
| Permanent Linear Change (%) | |||||||||
| 800°C (temp. x 3 hrs.) (Max) | ± 0.40 | ± 0.80 | ± 0.60 | - | - | - | - | - | - |
| 1100°C | ± 0.60 | ± 1.20 | - | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 |
| 1200°C | - | - | ± 1.00 | - | - | - | - | - | - |
| 1300°C | - | - | - | ± 1.00 | ± 0.80 | ± 1.00 | ± 1.00 | - | - |
| 1350°C | - | - | - | - | - | - | - | ± 0.80 | ± 1.00 |
|
NOTE :
|
We Provide Optimum Refractory Castables that are Commonly Used for Hot Face and Back Up Linings. Our High Alumina Refractory Castables are Highly Appreciated for Low Thermal Conductivity and Low Density that Assists in Conserving Heat Energy. Low Concentration of Iron in Our Insulating Refractory Castables Makes Them Perfect for Various Industries. We Offer Insulating Refractory Castables At Very Affordable Prices Within the Specified Time Frame. We have Carved a Niche as One of the Moving Ahead Insulating Refractory Castables Manufacturers and Suppliers Based in India.
Application
Iron and steel Industry for lining blast furnaces and for skew backs, ports and roof lining of arc – melting furnaces
For Lining of pre heaters / Converters and on all transfer lines.
Coke basis gas production plants as well as gasification plants
Blast furnaces
Foundries
Boiler industry stoker arches
Locations where reducing atmospheres are encountered.
Construction of soak pit covers, forge furnaces, tunnel kilns, heat treatment
furnace car tops as well as electro-phosphorus furnaces.
Iron and steel industry
Semi-permanent foundries
Annealing furnaces
Stress relieving furnaces, boilers
Properties
| PARTICULARS | DAT-CAST 45 | DAT-CAST 60 | DAT-CAST 70 | DAT-CAST 80 | DAT-CAST 90 | DAT-CAST 95 | DAT-CAST ULCC-90 | DAT-CAST ULCC-95 |
|---|---|---|---|---|---|---|---|---|
| GENERAL PROPERTIES | ||||||||
| Service Temp. °C (Max) | 1550 | 1600 | 1600 | 1700 | 1700 | 1800 | 1750 | 1800 |
| Grain Size mm (Max) | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Water Required for Casting (%) | 43226 | 4.8-5.5 | 4.8-5.5 | 4.5-5.3 | 4.2-5.0 | 4.0-4.8 | 4.2-5.0 | 4.0-4.8 |
| CHEMICAL PROPERTIES | ||||||||
| Al2O3 (Min.) | 45 | 60 | 70 | 80 | 90 | 94 | 90 | 94 |
| Fe2O3 (Max) | 1 | 1.5 | 1.5 | 1.8 | 1 | 0.3 | 1 | 0.3 |
| PHYSICAL PROPERTIES | ||||||||
| Bulk Density (gm/cc) (Min) (dried at 110°C for 24 hrs.) (Min | 2.3 | 2.6 | 2.7 | 2.9 | 3 | 3.1 | 3 | 3 |
| Cold Crushing Strength (kg/cm2) | - | 750 | 750 | 800 | 950 | 1000 | - | 400 |
| 110°C | 700 | 800 | 800 | 900 | 1000 | 1050 | 450 | 700 |
| 800°C | 800 | 900 | 900 | 1000 | 1100 | 1100 | 1000 | 1000 |
| 1100°C | 900 | 1000 | 1000 | 1200 | 1200 | 1250 | 1100 | 1250 |
| 1500°C | 1000 | - | - | - | - | - | 1200 | - |
| THERMAL PROPERTIES | ||||||||
| Refractoriness °C (Min) | 1717 | 1804 | 1804 | 1820 | 1820 | 1835 | 1835 | 1835 |
| Permananet Linear Change (%) 800°C | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 | ± 0.20 |
| 1100°C | ± 0.30 | ± 0.30 | ± 0.30 | ± 0.30 | ± 0.30 | ± 0.30 | ± 0.30 | ± 0.30 |
| 1500°C | ± 1.00 | ± 1.00 | ± 1.00 | ± 0.80 | ± 0.80 | ± 0.80 | ± 0.80 | ± 0.80 |
Properties
| PARTICULARS | DAT-CAST NORMAL | DAT-CAST SUPER | DAT-CAST SPECIAL |
|---|---|---|---|
| GENERAL PROPERTIES | |||
| Service Temp. °C (Max) | 1400 | 1450 | 1350 |
| Grain Size mm (Max) | 5 | 5 | 5 |
| Water Required for Casting (%) | 10.5-11.5 | 43384 | 10.5-11.5 |
| CHEMICAL PROPERTIES | |||
| Al2O3 (Min) | 45 | 70 | 45 |
| Fe2O3 (Max) | 4 | 5 | 4 |
| PHYSICAL PROPERTIES | |||
| Bulk Density (Kg/M3) (dried at 110°C for 24 hrs.) (Min) | 2.1 | 2.5 | 2.2 |
| Cold Crushing Strength (kg/cm2) 110°C | 250 | 350 | 400 |
| 800°C | - | 250 | 225 |
| 1350°C | 225 | - | 300 |
| 1450°C | - | 450 | - |
| THERMAL PROPERTIES | |||
| Refractoriness °C(Min) | 1564 | 1683 | 1450 |
| Permanent Linear Change (%) At service temp (Max) 1350°C/3 hrs | ±1.00 | ±1.00 | ±0.80 |
STC has been in Various Mineral & Metals business as a family concern since 1998. The Company has acquired 5 mining leases in various District of Gujarat State, India, having total area of about 45 hectares, over & above 36 hectares being possessed in name of its associated company as well a fresh application for about 20 hectares to Govt. during 2001.
Minerals Lease : Bauxite, Red Ocher, Yellow Ocher, Lime Stone And Natural Gypsum
RED OCHERThe main color giving component of natural red ochre (ocher) is composed of hematite (∝-Fe2O3). The term red ochre (ocher) or red earth describes various kinds of iron oxide pigments such as Venetian red, mars red, English red, Indian red. Iron oxides are stable at high temperatures but not resistant against acids. The pigment is absolutely stable as is documented by the cave paintings still in excellent condition after many thousands of years.
APPLICATION
Paint : Red Ochre is used in colour washes, distempers, oil paints, lacquers, primers tiles & ceramic,
Other Uses
Technical Specification
| Chemical Composition | Unit | Result | Protocol |
|---|---|---|---|
| Silica As SiO2 | % | 37.77 | IS : 2000:P-2:1985 |
| Magnesium Oxide As MgO | % | 0.09 | IS : 5949 : 1990 |
| Calcium Oxide As CaO | % | 0.56 | IS : 5949 : 1990 |
| Iron Oxide As Fe2O3 | % | 18.69 | IS : 2840 : 2002 |
| Alumina Oxide As Al2O3 | % | 29.54 | IS : 2840 : 2002 |
| Loss of Ignition | % | 9.24 | IS : 2840:2002 |
| Sizes | % | 0-200mm & 100 + mesh |
STC has been in Various Mineral & Metals business as a family concern since 1998. The Company has acquired 5 mining leases in various District of Gujarat State, India, having total area of about 45 hectares, over & above 36 hectares being possessed in name of its associated company as well a fresh application for about 20 hectares to Govt. during 2001.
Minerals Lease : Bauxite, Red Ocher, Yellow Ocher, Lime Stone And Natural Gypsum
YELLOW OCHERYellow Ocher other name is Goethite, limonite, raw sienna, yellow earth, yellow iron oxide, yellow hydrated oxide and iron hydroxide pigment, The main color giving component of natural yellow ochre (ocher, yellow earth) is limonite which is not a single mineral but a mixture of several iron-containing minerals among them goethite, akageneite, lepidocrocite, and jarosite, goethite (iron oxide hydroxide α-FeOOH) being the main component.
Iron oxides are stable at high temperatures but not resistant against acids. The pigment is absolutely stable as is documented by the cave paintings still in excellent condition after many thousands of years. It is compatible with all other pigments and is often used in mixture with other paints.
APPLICATION
Paint & Pharmaceutical Industries
Oil Absorption and GrindingOcher absorbs a moderately high amount of oil. The oil absorption ratio is 30–35 parts by weight of linseed oil to 100 parts by weight of pigment. If the measurement were grams, this pigment would require 30-35 grams of pigment to grind 100 grams of linseed oil to form a stiff paste. It slows the drying of oil paint, but forms a good film.
Other Uses
Technical Specification
| Chemical Composition | Unit | Result | Protocol |
|---|---|---|---|
| Silica As SiO2 | % | 16 to 21 | IS : 2000:P-2:1985 |
| Magnesium Oxide As MgO | % | 2 to 25 | IS : 5949 : 1990 |
| Calcium Oxide As CaO | % | 27 to 32 | IS : 5949 : 1990 |
| Iron Oxide As Fe2O3 | % | 11 to 18 | IS : 2840 : 2002 |
| Alumina Oxide As Al2O3 | % | 10 to 15 | IS : 2840 : 2002 |
| Sodium As Na2O | % | 0.01 to 0.20 | IS : 9497 : 1980 |
| Potassium As K2O | % | 0.25 to 1.15 | IS : 9497 : 1980 |
| Loss of Ignition | % | 25 to 28 | IS : 2840:2002 |
| Sizes | % | 0-200mm & 100 + mesh |
Our Manufacturing Unit is located at Sihor GIDC Bhavnagar in State of Gujarat, India. And are actively involved in manufacturing of Bentonite Fertilizer, Soil Conditioner, CMS Granules, Micronutrient Fertilizer & Bio Fertilizer. At the outset we commenced from the grass root level. Gypsum Bentonite Granules as a CMS -Calcium, Magnesium Suplphate are made of Bentonite, phosphoric gypsum (CaSO4.2H2O), it is a good source of calcium, magnesium and sulfur. Bentonite clay is used as a binding agent to form spherical granules. It is a well-known fact that Gypsum is a soil conditioner which is the cheapest and nature friendly source of secondary nutrient calcium and sulphur. It can be applied on all crops at any stage.
ApplicationsUnfavourable soil conditions are the primary reasons for lower productivity of agriculture produce, their rectification is prerequisite for a profitable agriculture, Soil Conditioner has to be mixed with soil at least 3 weeks prior to sowing or planting / transplanting or before sowing.
The Effects Of Using Soil Conditioner
Soil Amendment Or Conditioner
How Soil Conditioners Work?At Datvi Industries, we believe the best crops are grown in soils that have balanced chemical, physical and biological properties.For a long time, it has been known that plants need more than N-P-K nutrients for healthy growth. However, today agriculture is based on the Liebig’s theory of water-soluble minerals as the only requirement for healthy, nutrition and growth of plants.
Why Use Our Soil Conditioners?Plants fed with organic sources of nutrients from soil conditioners (or soil amendments) can deliver the same yield compared to those of chemical fertilizers. In addition, the quality of the proteins, vitamins and other essential components for healthy nutrition are superior in the plants grown under an organic regime.
Details
| For Alkaline Soils | For Acidic Soils |
|---|---|
| Soil PH value Dose / acre | Soil PH value Dose / acre |
| 7.3-7.8 50 kg | 6.8-6.3 50 kg |
| 7.9-8.3 100 kg | 6.2-5.8 100 kg |
| 8.4-8.7 150 kg | 5.8-5.2 150 kg |
| Above 8.7 200 kg | Below 5.2 200 kg |
What is BCG - These are Black double roasted granules roasted at 700 * C temperature. Raw granules are made from selected high quality Bentonite clay containing high amount mainly AL2o3 and Si02
Uses - They are widely used as carrier in formulation of pesticides, herbicides, fungicides, bio-pesticides, Plants growth promoter and Bio-fertilizers.
Benefits - It acts as a preservative of active ingredients. It saves the technical ingredients from the direct ultraviolet rays of sun. It is in the form of granules so it's easy to apply in the field in wind condition and also on the standing crop. It can be easily mix with seed before sowing. Due its hardness and high absorbent capacity while formulation it doesn't stick to the wall of granulator or form cakes. Hence it doesn't contaminate the technical material formulated on it. After it comes in contact of water it releases the active ingredients slowly over a long period of time hence reducing the chances of wash out in high rain or water logging condition. As the raw clay used to make blank granules is soft by nature hence make the land softer and moist. In spite of the above mentioned wide uses and benefits it is a low cost filler material.
Shree Trading Company has been in Various Mineral & Metals business as a family concern since 1998. The Company has acquired 9 mining leases in various State of India as Gujarat, Madhya Pradesh, Rajasthan & Karnataka, having total area of about 108 hectares, over & above 45 hectares being possessed in name of its associated company as well a fresh application for about 40 hectares to Govt. during 2000.
The Minerals used in Various Sector Like Refractory industries, Abrasives and Ceramics Industries, Steel Plant, Cement Plant, Aluminum Plant, and Alum Plant (Ferric & None Ferric).
Description: : Round Kiln calcined low alkali bauxite is ground in alumina lined ball mills using high density alumina grinding media.
Applications: : Raw material for use in high alumina and super duty refractory bricks and shapes, plastics, castables, mortors, gun mixes, ramming mixes, abrasive grains and other products.
Ceramic Ground Bauxite : Refractory grade calcined bauxite fines are ground in alumina lined ball mills using high alumina grinding media. This ensures extremely low magnetic iron levels in the fines. Refractory grade calcined bauxite ceramically ground fines are an excellent source of alumina for high alumina refractory formulations where no metallic iron reactions are important.
Raw Bauxite Grades Available
| Raw Bauxite | Cement Grade | Metal Grade | Chemical Grade (For Alum Plant) |
|---|---|---|---|
| Al2O3 | 40-48% | 45-50% max | |
| Fe2O3 | 10% min | 8% min | 55 TO 57% |
| SiO2 | 5-10% max | 4% to 7% max | 0 TO 5% |
| TiO2 | 3.5% max | 3.5% max | 6 TO 8% |
| CaO | 2.5-3% | 2% max | 2 TO 3% |
| LOI | 29% max | 28-30% max | 27 TO 28% |
| Moisture | 5% max | 5% max | 0.07 |
| Size | 0 to 150mm Min | 0 to 150mm Min | 0 to 150mm Min |
Calcined Bauxite Grades Available
| Rotary Kiln | Shaft Kiln | ||||
| Calcined Bauxite | General Grade | Low Ferric | Abrasive Grade | Scay | Scay-H |
| Al2O3 | 85-86% | 85-88% | 85-87% | 75-76% | 77-80% |
| Fe2O3 | 3.6% max | 2.5-2.6% max | 4.0% max | 4.5% max | 4.5% max |
| SiO2 | 3.6% max | 3.6% max | 3.6% max | 7.0% max | 7.0% max |
| TiO2 | 4.6% max | 4.6% max | 4.8% max | 4.5% max | 4.5% max |
| CaO | 2.2% max | 2.2% max | 1.2% max | 2.6% max | 2.6% max |
| MgO | 0.3% max | 0.3% max | 0.25% max | 0.3% max | 0.3% max |
| LOI | 0.4% max | 0.4% max | 0.8% max | 1.6% max | 0.9% max |
| Bulk Density gm/cc | 36953 | 36953 | 2.6-2.8 | 2.6 to 2.75 | 2.85 |
Shree Trading Company has been in Various Mineral & Metals business as a family concern since 1998. The Company has acquired 9 mining leases in various State of India as Gujarat, Madhya Pradesh, Rajasthan & Karnataka, having total area of about 108 hectares, over & above 45 hectares being possessed in name of its associated company as well a fresh application for about 40 hectares to Govt. during 2000.
The Minerals used in Various Sector Like Refractory industries, Abrasives and Ceramics Industries, Steel Plant, Cement Plant, Aluminum Plant, and Alum Plant (Ferric & None Ferric).
Additional Information:
Packaging Details : Packed in PP Bags
Silica ramming mass, also known as acidic ramming mass, plays a crucial role in induction furnaces during melting of steel. This substance is used to line induction furnaces and its quality decides smooth working and more efficient output from the furnace. Ramming mass has a very important quality of withstanding of easily absorbing thermal shocks. It also does not develop cracks because of frequent power cuts during the operation of the induction furnace. Datvi Industries makes very high quality silica ramming mass containing very dense silica quartz. This is why it a very respected name among silica ramming mass products from Indian industries.
Process of making Silica Ramming MassShree trading co. has the technical know how and a huge manufacturing plant in Gujarat. Experienced professionals having in depth knowledge of refractory materials mix different grain sizes of silica in just the right proportions to make ramming mass suitable for induction furnaces of various sizes. We make premix ramming mass containing boric acid as well as preheated ramming mass. Our ramming mass gives a great performance when it is used to line an induction furnace as it reduces cost of operations. This is why "Datvi" remains the most popular silica ramming mass products manufacturers and exporters from India.
Benefits of using our products
Shree Trading Company has been in Various Mineral & Metals business as a family concern since 1998. The Company has acquired 9 mining leases in various State of India as Gujarat, Madhya Pradesh, Rajasthan & Karnataka, having total area of about 108 hectares, over & above 45 hectares being possessed in name of its associated company as well a fresh application for about 40 hectares to Govt. during 2000.
The Minerals used in Various Sector Like Refractory industries, Abrasives and Ceramics Industries, Steel Plant, Cement Plant, Aluminum Plant, and Alum Plant (Ferric & None Ferric).
China Clay / Kaolin Clay is naturally occurring hydrated Aluminium Silicate. It mainly has oil absorbing properties, reduced shine and translucent properties. It also provides hiding effect and reduces the usage of TiO2 to a great extent.
Industrial Applications
We offer China Clay of different grades as follows :
Clay Micro White Powder
Clay Levigated Ultrafine Powder
Clay Super White Powder
Clay 300, 400 & 500 Mesh Powder
Clay Crude Powder / China Clay Ordinary Powder
We also offer Calcined Clay as per specification.
Typical Composition
| Parameters | China Clay / Kaolin Clay | Calcined Clay |
|---|---|---|
| SiO2 | 44 to 47% | 0.48 |
| Al2O3 | 35.85 to 39% | 0.41 |
| Loss on Ignition | 0.12 | Below 1% |
| Specific Gravity | 2.7 | 2.41 |
| Oil Absorption | 25-32 | 42 |
| pH | 6.5 to 7 | 6.5 to 7 |
Shree Trading Company has been in Various Mineral & Metals business as a family concern since 1998. The Company has acquired 9 mining leases in various State of India as Gujarat, Madhya Pradesh, Rajasthan & Karnataka, having total area of about 108 hectares, over & above 45 hectares being possessed in name of its associated company as well a fresh application for about 40 hectares to Govt. during 2000.
The Minerals used in Various Sector Like Refractory industries, Abrasives and Ceramics Industries, Steel Plant, Cement Plant, Aluminum Plant, and Alum Plant (Ferric & None Ferric).
Applications
As filler of various industrial applications
Low alumina refractories manufacturers
For pesticides manufacturers
Typical Chemical Analysis
| Silica | (%) | (SiO2) | 59 ± 02 |
|---|---|---|---|
| Alumina | (%) | (Al2O3) | 31 ± 01 |
| Ferric Oxide | (%) | (Fe2O3) | 0.6 |
| Titanium | (%) | (TiO2) | 0.5 |
| Magnesia | (%) | (MgO) | 0.5 |
| Calcium Oxide | (%) | (CaO) | 1 |
| Undetermined | (%) | (R2O3) | Below 1.0 |
| Loss on ignition | 5.5±0.5 | ||
| Hardness (Raw) | 2 | ||
| Hardness (Raw) | 2 | ||
| PCE | 28 |
We have avialble for sale Raw bauxite (Al2O3 36 to 44%)
Qty Approx 10000 MTS
Location : Gujarat
Additional Information:
Payment Terms :
Packaging Details : Packing loose
Delivery Time : Ready for dispatch
