Shree Khodiar Asbestos Company

Sarangpur, Ahmedabad, Gujarat

We are listed at the apex in the list of the eminent Moulded Friction Sheets Exporters from India. The Industrial Friction Sheets, offered by us, are sourced from Supremo Polymer Industries like Dupont, Hoechst, ICI, Diakin, HFL etc. The unmatched quality and high precision has made the Asbestos Friction Sheets ideal for various industrial applications.

Salient Features :

Low Coefficient of Friction.	Chemical Inertness.
Non Toxic.	Non Flammable.
Self Lubricate.	Excellent Weathering Resistance.
Exhibits Lowest Valueof Static and Dynamic Friction.	Negligible Water Absorption.
Outstanding Electrical Propertiesover a Wide Frequency Range.	Operating Temperature Range : -270 C to +260C.

Shapes Available :

Rods.	Bushes.
Sheets.	Tubes.
Gaskets.	Bellows.
"O" Ring.	Mechanical Seal.
Components.

Availability :As per the requirement of the applications, the Industrial Friction Sheets are available as the below mentioned and in varied sizes.

Rubber, Diaphragms Vulcanized with PTFE.	Piston Rings.
Envelope Gasket.	Compressor Component.
Ball Valve Seat Rings.	Spindle Rings.

Compo Friction Sheet HCAF 211 GG :COMPO HCAF 211 GG is one of the "COMPO" range of Non asbestos friction materials. It is rigid moulded product dark grey in colour and having short filaments of steel and non - metallic substances in a random dispersion and uses a specially developed resin as matrix which contributes to both the strength and performance of material. This material is produced only in flat sheet form and suitable for use under dry or oi immersed operating conditions HCAF 211 GG has medium friction with excellent fade and wear resistance. It machines well and suitable for use at a variety of duty levels, yielding consistent performance characteristic. This material is manufactured with ground finish on both surfaces, so may be bonded on either side. Applications :

• Industrial disc. brakes.
• Industrial clutches.
• Tractor steering clutches.

Note :The continuous temperature quoted is for constant slip condition. It is possible to exceed the recommended maximum continuous temperature for intermittent applications upto 225oC for long periods. Recommended Mating Surface :

• Good quality close grained pearlitic cast iron.
• If steel, then forged or cold rolled with a brinell hardness of 200 or over.
• Cast steels are not recommended for use as mating surface.

Machining Data : Carbide tipped tools are recommended for use with this material for drilling, turning and boring.

We are renowned as one of the forefront PTFE Plastic Products Exporters from India. The Ptfe Products are dark grey in color and have short filaments of steel and non - metallic substances in a random dispersion. The Polytetrafluoroethylene Products are ideal for applications under dry or oil immersed operating conditions. Moreover, the unmatched quality, high performance and precision have made the PTFE Products ideal solution for various different industrial applications.

The Company : PTFE : Polytetra Fluoroethylene and Engineering plastics is compression molded in various shape, forms and convert in engineering products. By Supremo Polymer Industries. The company is managed by technocrats and product is manufactured under strict supervision ensuring excellent quality to end user. The Advantages & Superiority :PTFE to be processed and convert in finish product by customer's require standard is done by Supremo Polymer Industries have superiors in quality. because of using the world renown company is raw material like. Dupont, Hoechst, ICI, Diakin, HFL and Having own Tool Room with highly skill technicians molded and fabricated the product with international standard quality have following characteristics.

Low coefficient of friction.	Chemical inertness.
Non toxic	Non flammable
Self lubricate	Excellent weathering resistance
Exhibits lowest value of static and dynamic friction	Negligible water absorption
Outstanding electrical properties over a wide frequency range	Operating temperature range : -270 C to +260C.

The Product: Delivering New Standard of Performance : Supremo product can be available in standard shape as below.

Rods,	Bushes.
Sheets.	Tubes.
Gaskets.	Bellows.
"O" ring	mechanical seal.
Components.

Depending on the use application Die can be designed to tailor made requirement of customer as below.

Rubber, Diaphragms vulcanized with PTFE.	Piston rings
Envelope gasket	Compressor component
Ball valve seat rings	Spindle rings

Special items or size available from us. Helping you achieve optimum result :In all grade of PTFE and their copolymer we can be carbon filled, glass filled, Bronze filled, graphite filled, MOS2, compressed molding. Teflon skived tapes and moulded sheet can be furnished with one or more surfaces chemically etched for adhesive bonding. Application development :Product by Supremo from PTFE is extensively in use by Plant and Industries like Pharmaceuticals, Chemical, Aeronautics, Space Engineering, Mechanical, Petrochemical, Drugs, Rubber and plastics, Marine lines, Electrical and Electronics, Agricultural, Fertilizer, Paper and pulp, Distribution and generation of Power, Food, Beverages, Lime, Cement, Ceramic, Glass, Metallurgical, Metal, etc. If you can imagine the possibilities of product, please well come to Supremo to make your vision come true. Applications :

• Industrial Disc Brakes.
• Industrial Clutches.
• Tractor Steering Clutches.

We are looked upon as one of the outstanding Roll Brake Lining Exporters and Suppliers in India. The Industrial Roll Lining, offered by us, is manufactured using hi-grade friction materials i.e. yarn, spun around brass wire etc. The Industrial Roll Linings have resistance up to 100^oC (212^oF) temperature and are ideal for applications under dry conditions. Moreover, high durability and tensile strength has also made the Asbestos Roll Lining ideal for certain heavy road transport vehicles and tractors.

Applications :Industrial Band and Drum Brake Linings Industrial Band, Plate and Cone Clutch Lining (eg. Cranes, Lifts, Excavates, Winches, Concrete Mixers, Drop Hammers, Mine Widening Appliances, Underground Haulages, Tippers, Oil Well Draw Works, Road Rollers, Sugar Mill Centrifuges)

Note :The continuous temperature quoted is for constant slip conditions. For intermittent applications, bulk temperature of 160^oC are acceptable for long periods. Recommended mating surface :Good quality fine grained pearlitic cast iron. Cast steel is not suitable mating surface but forged or cold rolled steel with a brine ll hardness of 200 or more may be used. Design value : The co-efficient of friction design should be based upon the graph, the seventy of application and maximum anticipated operating temperature being taken into account. Normal engineering practice should be followed in applying an appropriate safety factor to torque requirement of brake / clutch unties. Machining :High speed steel tools are recommended for use with this material. Size Range (Nominal):Supplied in rolls of approximately 15 meters (50 ft) and thickness from 4.8mm (3/16") to 19mm 13/4") and width from 25.4mm.

Our company is counted amongst the dependable Cut Gaskets Suppliers in India. Meeting the specific requirements of the national as well as international clients, the company has acquired noteworthy position amidst the reliable Die Cut Gaskets Exporters. The use of optimum quality materials in the manufacturing of the Cut Gaskets ensures high durability, tensile strength and resistivity to adverse conditions. Additionally, customers are eased with the availability of the Custom Cut Gaskets in varied sizes and dimensions confirming to the specifications provided.

Custom Design & Production :With in house tooling and a full range of ex-stock materials to match your specifications. Uni Klinger can deliver from on off, to major project quantilities, promptly and economically. Uni Klinger technical support is available when designing gaskets and specific design data on each grade of Uni Klinger materials can be provided whatever size shape or type of compressed fibre gaskets you need. Uni Klinger can produce them. Stock Gaskets :Uni Klinger manufactures and stocks a wide rang eof standard pie flange gaskets to IS, ANSI & DIN standards in both flat ring for raised face flanges or full face for flat face configurations. Anti-Stick :Klinger 3XA anti-stick property eliminates the need for application of graphite or grease. Use of graphite or grease impairs the creep resistance of all jointing and is not recommended. The ASTM F607 release test on Klinger 3XA shows more than a three - fold improvement compared to standard jointing. Anti-Corrosion :Klinger 3XA surface finish reduces the amount of reachable chlorides at the contact surface with the flange, thus substantially reducing the corrosive effect of materials with reachable chlorides over 100 ppm. The ASTM F64 corrosion test shows that our materials are classified in category 1 of 6 categories where 6 indicates the highest degree of corrosive attack. 3XA Improves Sealing qualities : 3XA completely conforms to the irregularities of the flange face giving better micro sealing. Klinger tests based on the DIN 3535 gas leakage test gives typical results of 0.2ml/min for 3XA finish).