Shree Firepack Safety Private Limited

Kadodara, Surat, Gujarat

• The packing is made of pure PTFE fiber, stretched and reinforced then impregnated with PTFE dispersion.
• It is recommended as dynamic sealing in places where linear velocity is upto 4 m/s.
• PTFE is a substance with low heat conductivity and great thermal expansion coefficient.

• TEMPERATURE : -200 C to +260 C
• PRESSURE : 20 MPA
• pH : 0 to 14

• Woven from glass fiber texturized yarn upon shuttle looms to produce required size.
• Fiberglass cloth is used as heat insulating material and an excellent substitute for asbestos cloth.

Applications :
It is widely used as insulation of soft or hard tubes, heat insulation covering of heaters and cooler, fire resistant shell, other insulation protecting covering and insulation of watercraft equipment because of its brilliant characteristics to high intensity, low density and good insulation.

• Fiberglass tape which is made of the non-alkali glass fiber yarns.
• The main component is E-glass, oxidation potassium and oxidation sodium with the content of oxidation of alkali metals is not more than 0.5 %
• Fiberglass tapes can be regarded as a complete binding solution as they have high tensile strength and reinforcing quality.
• They are highly recommended for electrical mending.

Size Range :

• Thickness: 3 mm to 6 mm
• Width: 25 mm to 100 mm

Applications :

• Excellent electrical insulation properties
• Excellent dimensional stability
• Excellent heat resistance (Normal service temperature is 120 C)

• Ceramic cloth is made from alumina silica fiber and especially mechanically needled for increased tensile strength and surface integrity.
• Ceramic fiber cloth contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

Applications :

• It can be used as expansion joint, safety blanket, curtains, welding blankets, protective and insulating cover, shields, gaskets etc.
• The product has been widely used in Welding, Foundry Works, Aluminium and Steel Mills, Boiler Insulation and Seal, Shipyards, Refineries, Oil and Gas, Power Plants and Chemical industries.

• Ceramic Fiber Tape is a woven fabric made from high quality ceramic fiber yarn.
• The tape is reinforced with fiberglass filament.
• Ceramic Fiber Tape contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

Applications :

• It can be used for protective and insulating covers or shields, cable or pipe wrapping, expansion joints, high temperature seals or gaskets.
• The product has been widely used in welding foundry works, aluminium and steel mills, boiler insulation and seal, exhaust system, shipyards, refineries, power plants, and chemical plants.

• The packing is made of polyacrylonitrile fiber, heated into carbonized fiber, which is woven into packing after impregnation in PTFE dispersion containing graphite particles.
• It is used as dynamic sealing in presence of media of weak acid or alkaline, or media that contain few grains of solid particles.

• TEMPERATURE : -210 C to +260 C
• PRESSURE : 25 MPA
• pH : 0 to 14

• The packing is braided from 100 % GFO Fiber.
• It has better heat conduction at high speed as compared any other PTFE braided packings.

• TEMPERATURE : -260 C to +300 C
• PRESSURE : 30 MPTA
• pH : 0 to 14

• Rods are available in both virgin grades and reprocessed (mechanical) for less demanding applications.
• Various fillers are available to modify the properties of PTFE to meet application requirements.
• Teflon Rod has the lowest coefficient of friction of all known solid materials.
• Teflon Bar has the best electrical properties of all plastic rods.

• Skived and Molded sheets can be made in any thickness from 0.5 mm upto 100 mm
• Skived and Molded sheet is ideal as a slide surface, for chute liners, other kinds of liners, diaphragms, including complex stamped gasket configurations for many pharmaceutical and food processing.

• PTFE bushes which are extensively used in various industrial applications.
• Fabricated from superior grade PTFE, these bushes have long work life during which user optimize their utility.

Specifications :

• OD : 12 to 250 mm (standard)
• ID : 6 to 200 mm (Standard)
• LENGTH : 100 mm (Standard) upto 300 mm or longer in special cases

• PTFE tubes and pipes which are extensively used in chemical processing industry.
• These tubes and pipes are appreciated for their unique features such as :
  >> Chemical resistance to all known chemicals
  >> High temperature resistance
  >> Insulation to electricity
  >> Non-flammable

Specifications :

• DIA : 3 to 300 mm (Standard)
• LENGTH : 300 to 1000 mm (Standard), or in length coils

• Asbestos yarn is made of white, clean crystallite Twisted Asbestos Fiber which have been mechanically twisted to increase tensile strength.
• It has excellent resistant powers at high temperature.
• Ready flexibility is an additional advantage.

• Available in three varieties : NON-METALLIC , METALLIC (Brass Wire) and MANTLE
• Thickness Available : 0.8 mm to 6.0 mm
• Supplied in : kg & 1 kg spool

Applications :

• Extensively used as Caulking, Sealing and Heat Insulating Materials on Thermal Installations and Heat Conducting Systems.
• Its used for Impregnated Packings, Tubing, Sewing, Electrical Braiding, Resistance Nets, Cores and Manufacturing Incandescent Mantles.
• It is recommended for Saturated and Super-Heated Steam, Hot Water, Air, Gases, Oils, Steam Expansion Glands, Rotary and Reciprocating Equipment.

We are the main supplier of this product.

• Made from heat and fire resistance fabric life Fiber Glass / Ceramic / Asbestos.
• It protects human lives, precious capital goods and other valuable items from fire.
• Ideal for its use in the area of welding works.
• Fire curtain used to prevent radiant heat in hot region such as furnace boiler etc.
• Flexible / Movable curtains made out of the above material are also available which is very ideal for its use at the time of welding process.

• Made from Asbestos Cloth (SFI) similar to AMC 41.
• Heat resistance range upto 350 C.
• Economical and most durable
• Superior flannel lining

• Length : 10 to 14 or as required
• Usage : Workman protection against Heat and Fire Hazards