Our Products
Plastic Machine
2 Products availableSealing & Strapping Machines
2 Products availableOur Complete range of products are Tunnel Rinsing Machine, Reactor Vessel Conical Type, micro breweries, Mixing Tanks For Food, Cosmetic, Consumer Products and Automatic Viscose Liquid.
The carbonated filling Tri-bloc is used to bottle carbonated beverage, sparkling soft drinks, flavored soft drink with Co2.and so on in PET Bottles. This machine is integrated with washing, filling and capping in one machine. It takes bottle handling technology, which makes changing different size bottle more easily. It can do the bottles from size 200ml to 2000ml. And little spares are need when changing bottles. We suggest users to take same specification bottles, especially the same bottle neck. Our Tri-bloc uses high quality stainless steel 304, which makes sure the quality of the products. The washing we take reversing bottle methods. It has so many washing heads which will spray the inside of the bottle after the bottle is reversed. After washing there will approximate 2 seconds dropping water. The filling technology is named Counter pressure filling, it means when bottle enter into the filler, the filling tank will firstly inputting enough pressure to the bottle. Just after the pressure in tank is same as the bottle, filling begins. Capping we use magnetic capper. And capping power can be adjusted. We equip the machine with No-bottle, No-Cap system. If there is no bottle, the caps feeding will be stopped. The capper feeder is stand beside the mono-bloc, which is parallel to the machine.
Above all our mono-bloc is high quality and is just the machine you are looking for!
It adopts neck holding type conveying-bottle structure to make changing bottle model more convenient, faster and more est. The main machine adopts advanced PLC control technology
Type | 12-04-01 | 08-08-03 | 12-12-06 | 14-12-05 | 18-18-06 | 24-24-08 | 32-32-10 |
Wash No. | 12 | 08 | 12 | 14 | 18 | 24 | 32 |
Filling Heads | 04 | 08 | 12 | 12 | 18 | 24 | 32 |
Capping heads | 01 | 03 | 06 | 05 | 06 | 08 | 10 |
Productivity | 1200BPH | 1800BPH | 3000BPH | 6000BPH | 5000BPH | 8000BPH | 10000BPH |
High Speed Linear Bottle Washing Machine is most ideal for Round Bottles and finds wide application in PHARMA, FOOD & BEVERAGES INDUSTRIES. The automatic loading arrangement facilities loading of bottles on to SS wire mesh conveyor through feed conveyor or bottles are pushed manually from feed table. This saves manpower as bottles are feed into pockets automatically. The automatic unloading mechanism consists of unloading bottle continues on to turn table (Optional).
OPERATION :Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure.
In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements.
The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at center of the bottle and the bottle comes out with water totally drained with minimum droplets of water.
SALIENT FEATURES :
MODEL | SLBW-100 | SLBW-150 | SLBW-250 | |
Out put / Hour* | 6000 bottles | 9000 bottles | 12000 bottles | |
No. of Pocket Across | 10 | 12 | 20 | |
Electrical Specifications** |
Main Motor | 1 HP / 415 Volts / 50 Hz | ||
Pump Two Nos. | 1 HP x 2 = 2 HP / 415 Volts / 50 Hz | |||
Electrical Heater | 3 Kw. | |||
Conveyor | 0.5 HP / 415 Volts / 50 Hz | |||
Tank Capacity | 80 Ltrs. S.S. 316 | |||
Wash Cycle | 3 Inner + 1 Outer + 1 Air | |||
Cycle Timing | 3.5 Second for each wash + 1.5 second for travelling. | |||
Water / Air Consumptions | 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM |
We manufacture and supply Automatic Volumetric Liquid Filling Machines, which consist of self lubricating UHMW- PE guide profile for SS slat chain that ensures low friction wear surface, smooth and noiseless operations. These are synchronized with two A/C drives for main motor & conveyor belts to offer trouble free performance.
This metering pump filling machine is specially made for all viscous materials, such as lubricant, petrol, engineer oil etc. The machine adopts position pump for filling. By adjusting the 100 mlL position pump, it can fill 1L/ 4L/ 5L bottles, with quick speed and high precision.
TECHNICAL SPECIFICATIONBRAND | BHAGWATI |
Model | SBFILL |
Product to be Filled | Oil |
Fill Volume | 100 ml to 5 Litres |
Output/Min | 30-120 depending on material foaming character |
Filling nozzle | 2 -16 Nozzle |
Position pump volume | 2 -16 |
Filling precision | 0.5% |
Air consumption | 0.60.8MPa |
Power | 380v 2p 60Hz |
Power | 1.5Kw |
Single machine noise | 50dB |
Weight | 1200Kg |
Machine size | L2500*W850*H2000mm |