We offer the finest quality MS Angles, which are extensively used in fabrication industry. The dimension is determined by the length and the thickness of the two sides. The most commonly found steel angles are formed at a 90 degree angle and has two legs of equal length. The sides are either equal or of different sizes, if one leg is longer than the other then it is known as UNEQUAL angle. The steel angles of various strength like HT (High Tensile)MS are formed as required by different applications. These products are used in bracket, trimming, transmission line, framing and reinforcement. Our company also stocks and supplies Tower sections against orders of clients.

We offer the finest quality MS Channels, which are extensively used in fabrication industry. A channel is a right angle "C" section. They are also called C Channels. Along with beams, channels are mainly used in structural applications. Mostly MS Channels are used as supports and guide. These are roll-formed products. MS Channels are usually applied in the automotive industry as well as heavy machinery industries. Generally, there are 3 types of mild steel channel, they are: 1) Plain Channels, 2) Lipped Channels & 3) Universal Channels. Our range of MS Channels is available in different sizes and dimensions and can also be customized as per the requirements of our clients.

Its ductility and bend ability on the other hand, makes it the perfect choice for buildings in seismic zones for high-stress construction structures. They find wide application for a number of high-specialty and custom constructions including coastal and marine environments which are susceptible to corrosion and general purpose concrete reinforcement structures like Homes, Apartments, Hospitals, Hotels, Auditoriums, Bridges, Dams, Flyovers, Thermal & Hydel Power Plants, Industrial Structures, High-rise buildings Earthquake-sensitive zones, Underground platforms in Metro Railways and Rapid Transport Systems.

We offer Flats which are basically thin strips of mild steel with the thickness of the strip varying commonly from 8mm to 100mm though thicker flats are also available. Flat bars may be considered the most basic of steel structures. Its applications range from construction to machine fabrication. These flats are rolled in low temperature which imparts higher strength to the structures.

We also offer Rounds & Bright Bars. Bright Bars are steel or metal bars that are produced by one or more cold finishing processes. The processes outlined below are known as Cold Finish processes or the end products are known as cold finished because there is no or very little heat applied in the entire operation of converting them from hot rolled bars (also known as black bars) to Cold Finished Bars or Bright Steel Bars.

We offer steel squares which are hot rolled products, with a cross section of special contours like angles, channels and beams. The rolling and cutting tolerance for hot rolled products is as per the requisite standards. Our steel square bars are widely recommended for their wide usage in various industries and for a wide number of purposes. They are available with an assurance of high level of quality and performance. Pilling and automatic tying of the structure ensures minimum damage during handling and transport Apart from that we are the most trustworthy square bars suppliers of the same.

We offer a wide range of Hot Rolled and Cold Rolled Steel Sheets that is available in different width and thickness. Hot rolled coils, sheets are the largest product category in terms of both sales volume and revenue. Hot Rolled Coils are primarily used for making pipes and have many direct industrial and manufacturing applications, including the construction of tanks, railway cars, bicycle frames, ships, engineering and military equipment and automobile and truck wheels, frames and body parts. Hot Rolled Coils are also used as feedstock for cold rolling mills where they undergo further processing.

We offer a comprehensive range of galvanized coils, galvanized sheets, and galvanized steel coils, hot dip galvanized coils, galvanized steel sheets, plain steel sheets, corrugated steel sheets, which have carved a niche in domestic as well as overseas market. These GPGC Sheets comes with zinc coating thickness of 120gsm, lending it great durability. It is the roof that has to take the brunt of nature's extremities during its entire life and hence utmost care must be taken in selection of the right roofing material

We offer the finest quality MS Angles, which are extensively used in fabrication industry. The dimension is determined by the length and the thickness of the two sides. The most commonly found steel angles are formed at a 90 degree angle and has two legs of equal length. The sides are either equal or of different sizes, if one leg is longer than the other then it is known as UNEQUAL angle. The steel angles of various strength like HT (High Tensile)MS are formed as required by different applications. These products are used in bracket, trimming, transmission line, framing and reinforcement. Our company also stocks and supplies Tower sections against orders of clients.

We offer the finest quality MS Channels, which are extensively used in fabrication industry. A channel is a right angle "C" section. They are also called C Channels. Along with beams, channels are mainly used in structural applications. Mostly MS Channels are used as supports and guide. These are roll-formed products. MS Channels are usually applied in the automotive industry as well as heavy machinery industries. Generally, there are 3 types of mild steel channel, they are: 1) Plain Channels, 2) Lipped Channels & 3) Universal Channels. Our range of MS Channels is available in different sizes and dimensions and can also be customized as per the requirements of our clients.

Its ductility and bend ability on the other hand, makes it the perfect choice for buildings in seismic zones for high-stress construction structures. They find wide application for a number of high-specialty and custom constructions including coastal and marine environments which are susceptible to corrosion and general purpose concrete reinforcement structures like Homes, Apartments, Hospitals, Hotels, Auditoriums, Bridges, Dams, Flyovers, Thermal & Hydel Power Plants, Industrial Structures, High-rise buildings Earthquake-sensitive zones, Underground platforms in Metro Railways and Rapid Transport Systems.

We offer Flats which are basically thin strips of mild steel with the thickness of the strip varying commonly from 8mm to 100mm though thicker flats are also available. Flat bars may be considered the most basic of steel structures. Its applications range from construction to machine fabrication. These flats are rolled in low temperature which imparts higher strength to the structures.

We also offer Rounds & Bright Bars. Bright Bars are steel or metal bars that are produced by one or more cold finishing processes. The processes outlined below are known as Cold Finish processes or the end products are known as cold finished because there is no or very little heat applied in the entire operation of converting them from hot rolled bars (also known as black bars) to Cold Finished Bars or Bright Steel Bars.

We offer steel squares which are hot rolled products, with a cross section of special contours like angles, channels and beams. The rolling and cutting tolerance for hot rolled products is as per the requisite standards. Our steel square bars are widely recommended for their wide usage in various industries and for a wide number of purposes. They are available with an assurance of high level of quality and performance. Pilling and automatic tying of the structure ensures minimum damage during handling and transport Apart from that we are the most trustworthy square bars suppliers of the same.

We offer a wide range of Hot Rolled and Cold Rolled Steel Sheets that is available in different width and thickness. Hot rolled coils, sheets are the largest product category in terms of both sales volume and revenue. Hot Rolled Coils are primarily used for making pipes and have many direct industrial and manufacturing applications, including the construction of tanks, railway cars, bicycle frames, ships, engineering and military equipment and automobile and truck wheels, frames and body parts. Hot Rolled Coils are also used as feedstock for cold rolling mills where they undergo further processing.

We offer a comprehensive range of galvanized coils, galvanized sheets, and galvanized steel coils, hot dip galvanized coils, galvanized steel sheets, plain steel sheets, corrugated steel sheets, which have carved a niche in domestic as well as overseas market. These GPGC Sheets comes with zinc coating thickness of 120gsm, lending it great durability. It is the roof that has to take the brunt of nature's extremities during its entire life and hence utmost care must be taken in selection of the right roofing material