Our Products
Hardings unique Totally Enclosed Davit concept integrates highly efficient electrical and hydraulic systems into the davit structure providing optimal protection against wear and tear.
Electric Boat Winches lower and retrieve life/rescue boats using single or double wire falls. Winches usually comprise of a drum for coiling the wire, gearbox, centrifugal brakes, electric motor, limit switches, etc.
We offer a wide range of UL listed, USCG approved, Wheelmark approved Fire Extinguishers. We are an authorized distributor and service partner of ANSUL, a premium brand of Tyco Fire Suppression & Building products. We offer the full line of ANSULs stored pressure, cartridge operated, wheeled, and clean agent, and special kitchen/restaurant portable fire extinguishers
Sprinkler systems are one of the oldest fire suppression systems still in use today. It consists of a water supply system which provides adequate pressure and flow to a water distribution system onto which the fire sprinklers are connected. Various types of fire sprinkler systems include Pre-action, Dry Pipe, Wet Pipe, Deluge, etc. We at SHM can offer the complete range of sprinkler systems that can meet your specific requirements.
Water Mist is a versatile and highly efficient fire-fighting medium. It has the unique ability to deliver water as a fine atomised mist. This mist quickly gets converted to steam that smothers the fire and prevents further oxygen from reaching it.
The effectiveness of a water mist system depends on its spray characteristics, which include the droplet size distribution, flux density, spray dynamics, etc. Immediate action, minimized water damage, non-toxicity are few advantages of a water mist system.
Gas detectors are used to detect combustible, flammable, toxic gases, and oxygen depletion in a confined spaces before entry. These detectors are widely used in the Oil & Gas, Mining, Fire Services, and Chemical industries. Water and dust resistant Intrinsically safe Warning signals: visual, audible, vibration Detects up to 4 types of gases and vapours
Designed for prompt response and quick clean-up of zoil spills. Our oil spill kit provides you with almost everything you need to become and efficient first responder, minimizing damage to the environment and avoiding costly fines. Insulating platform Built in conjunction with IMO guidelines and OPA90 Comprises oil spill and personnel protection equipment Stored in watertight FRP box Available in diffierent barrel sizes as per your requirement
Electrical emergency kit contains everything you need to rescue any person in a situation where there is an electrical hazard up to 25kV. Basic components of this kit comprise, but are not limited to the following:
Windsocks are designed to indicate wind direction and relative wind speed. They are typically used at airports, highways and also at locations where there is risk of gas leakage. Pole made of stainless steel; sock made of oxford nylon Comprises rotating head with bearing Optional customized mounting and lighting available.
Emergency evacuation mask designed to provide respiratory protection and reduce health risk associated with inhalation of toxic air caused by fire, smoke, chemical leakage, etc. Complies with EN 403 standards Comprises a visor, hood, and built-in filter Easy to use, one size fits all.
We can provide First Aid Kits specifically tailored to your requirement and in line with the Occupational Safety and Health Administration (OSHA) guidelines. Available for use in workplaces from 1-50 persons Cabinet of fibreglass or steel Printing on cabinet as per requirement.
Resuscitator provides positive pressure to inflate the lungs of an unconscious person or who is not breathing. Manual and Automatic Resuscitation systems available, with or without oxygen cylinder as per client requirement.
Portable, small, easy to use device that is designed to deliver an electrical shock to a person having Sudden Cardiac Arrest (SCA). Designed to be used by non-medical people within 3-5 minutes after collapse of victim.
A personal escape aid, designed to abandon an installation in case of a fire or emergency. Grab Bags can be customized to contain specific items you require. Basic items that comprise a Grab Bag are listed below:
Inergen Clean Agent Systems have been extensively used throughout the world as a preferred gaseous fire suppression agent for over 16 years and remains the longest surviving Halon replacement on the market.
INERGEN is a mixture of 52% Nitrogen, 40% Argon, and 8% CO2. It has a unique ability to rapidly extinguish fire and yet provide a safe environment for any person within the occupied area. INERGEN agent does not produce fog, so escape routes remain visible, and they do not take up premium floor space as the cylinders can be placed remotely from the protected risk.
The SAPPHIRE Clean Agent System quickly suppresses fire in areas where an electrically non-conductive medium is required and where electronic systems cannot be shut down in an emergency.
The SAPPHIRE system uses 3M Novec 1230 fire protection fluid for total flooding applications. The clear, colorless agent has zero ozone depletion potential, an atmospheric lifetime of just five days, and a global warming potential of 1.0. The SAPPHIRE system suppresses a fire before it can be fully engaged and once the fire is suppressed, Novec 1230 quickly evaporates without harming any valuable assets.
FM200 is a clean, gaseous agent containing no particles or oily residues. It is thermally and chemically stable and does not deplete stratospheric ozone.
The main advantage of FM200 fire suppression is that a small amount of the agent is required to suppress a fire. This means fewer cylinders, and therefore less wasted space. FM200 systems reach extinguishing levels in 10 seconds or less, stopping ordinary combustible, electrical and flammable liquid fire before they cause significant damage.
Twin-Agent Fire Suppression Systems combine the fast flame knockdown of dry chemical with the fire securing capabilities of aqueous film-forming foam. The twin-agent attack provides the most effective extinguishing and securing capability known for many flammable liquid fire. Industries that benefit most from the system include petroleum and petrochemical, marine, natural gas, and aviation.
Twin-Agent Systems combine two proven, powerful agents: dry chemical powder and foam. The powder provides rapid knockdown and suppression of flammable liquid fire, while the aqueous film-forming foam blankets the fuel with a thin film, preventing the escape of flammable vapors and cooling the site.
Deluge systems are designed to protect high hazard areas containing a severe fuel hazard with high heat release rate bringing a large number of open sprayers into action simultaneously in the event of a fire.
A typical Deluge valve system comprises of a control valve, a sprinkler operated detection system and a dedicated water supply system. Deluge valves are hydraulically operated, diaphragm actuated, globe or angle pattern valve that control the water flow in the fire protection sprinkler system.
In larger, more complex buildings more sophisticated intelligent fire alarm systems need to be used. These systems offer benefits in speed of detection, identification of the location of a fire and easier maintenance. Intelligent systems also offer improved maintenance and reduced cabling cost.
These systems comprise a complex set of equipment which include, heat detectors, smoke detectors, manual call points, control and relay modules, fault isolator modules, monitor modules, control panels, visual / audible alarms, strobes, etc.
The Foam Water Hose Reel Station (FWHR) is a self contained unit that relies on water flow and pressure to place the system into operation. It is designed to be installed in a fixed location such as helidecks, offshore processing areas to control fire or spills of flammable or combustible liquids.
Hose reels have a distinct advantage that they can be opened immediately and put to use. All that is required for operation is to fill the storage tank with correct type and quantity of foam concentrate and connect a suitable water source to the inlet.
Foam monitors are high capacity jets, controlling horizontal and vertical flow, that can be used to deliver large quantities of foam accurately to the affected area in the shortest possible time and from a safe distance.
Nozzles attached to foam monitors can also be adjusted to adapt the foam agent flow from fog or wide beam to jet or straight beam to increase the flexibility to the user. Monitors motion can be controlled automatically using water oscillators, electrically using joysticks, or manually using tiller bars or housewheels.
Vulcan F1 Firemans outfit, complying to SOLAS standards, has been designed to provide protection from the exposure of heat in the event of a fire.
Aether EBDs are used to safely evacuate from a dangerous environment that lacks normal breathing conditions. The complete set includes a face hood connected to the cylinder in a carry case and complies to SOLAS standards.
SOLAS Chapter II-2, Part G, Regulation 18 states that additional measures should be taken to address the fire safety objectives of this chapter for ships fitted with special facilities for helicopters.
Therefore, the following fire fighting appliances shall be provided and stored near the means of access to the helideck in close proximity: Fire Extinguishers, Foam Application System, 2 sets of Fire-Fighters Outfits, and a set helicopter rescue equipment.
The Civil Aviation Authoritys (CAA UK) CAP 437 standards strongly recommend helicopter rescue equipment be stored in a clearly marked and secure watertight cabinet or chest. A responsible person should be appointed to check and maintain the equipment regularly, and an inventory checklist should be held inside the equipment cabinet/chest. We can also tailor make the crash kit to meet local regulatory and client requirements.
ITEM | H1/H2 | H3 |
---|---|---|
Adjustable Wrench | 1 | 1 |
Rescue Axe, Large | 1 | 1 |
Bolt Cutters | 1 | 1 |
Crowbar, Large | 1 | 1 |
Hook, Grab or Salving | 1 | 1 |
Hacksaw (Heavy duty) w 6 spare blade | 6 | 6 |
Blanket, Fire Resistant | 1 | 1 |
Ladder ( 2 piece )* | 1 | 1 |
ITEM | H1/H2 | H3 |
---|---|---|
Fire Proof Lifeline | 1 | 1 |
Pliers, side cutting (tin snips) | 1 | 1 |
Assorted screwdrivers | 1 | 1 |
Harness knife and sheath** | 1 | 1 |
Gloves , Fire Resistant** | 1 | 1 |
Fire-Fighter’s Outfit | 2 | 2 |
Power cutting tool | - | 1 |
Billy Pugh Company provides many types of high performance knotted escape ropes and swing ropes that may be used in nearly any rigging or lifting application. Please see the descriptions bellow and contact our sales team to help determine which type of rope is right for you!
Patented design, Light-weight for tertiary means od escape. The patented Donuts is a simple, Light weight device designed as a tertiary means of escape at sea and on land. Units have deen deployed in the field for over 22 years from the extreme heat conditions of the middle East, Far East and Australia to the extreme cold of Canada and Russia.
The Immediate Support Vessel is a lightly armed surface vessel capable of operating in a sea state up to State 6 for rapid insertion, extraction, and patrolling of Offshore Development Areas (ODAs).
SHM brand of modular fire extinguishers provide an automatic detection and suppression system in a single unit. The modular fire extinguisher are available with dry chemical powder (MAP 50% & 90%) and clean agent gases in 2 kg, 5 kg, 10 kg and 15 kg capacities.
The fire extinguisher consists of a UL approved temperature sensitive bulb of 68 C temperature rating. The presence of a pressure gauge provides an instant verification of functionality and reliability of every unit.
The modular fire extinguishers are ideal for use in server rooms, factories and un maned stores.
The Portable Foam Applicator Unit acts as a supplement to the foam monitors. This unit provides high level of flexibility for extinguishing fire in the Marine & Offshore environment in sheltered areas where the reach of foam monitors are limited. The complete unit consists of: