Post Buy Requirement
SI
Delhi, India
Add Review

Our Products

  1. Industrial Machinery 4 Products available
  2. Laboratory Shakers 3 Products available
  3. Testing Equipment 5 Products available
  4. Laboratory Apparatus 17 Products available
  5. Laboratory Ovens 3 Products available
  6. Soil Testing Equipment 3 Products available
  7. Laboratory Equipments 12 Products available
  8. Others 71 Products available

Testing Equipment #682912

Flash Point Tester

  • sizes B-1, B-2, B-3, B-4, B-5
The paint film is bent through 180 over a 6.35 mm dia rod and examined for any damage, detachment or cracking of the film. The tester consists of two plates hinged at one end with the help of a 6.35 mm dia rod. A stop is provided on one plate against which the painted panel can be held. Complete with x10 magnifier
View Complete Details

Scratch Hardness Tester

  • Weight, 2 kg
  • Optional Extras Needle
The apparatus consists of a 1mm dia hemispherical stainless steel needle, fixed to a platform of a counter- balanced rod, which is assembled on a grooved platform. A rack moves through the groove, to which a painted panel can be clamped. An indicator lamp is provided to indicate the metal contact if the Needle penetrates the paint surface to make contact with the metal. Complete with 1 kg weight. Suitable for operation of 230 V, 50 Hz, single phase, AC supply
View Complete Details

Liquid Limit

The liquid limit, defined as the moisture content at which the soil passes from the plastic state to the liquid state, is very helpful in the classification of the potential properties of the soil material. The liquid limit gives a measure of the shearing resistance which a soil has when mixed with water. Casagrande Method or Cone Penetrometer Method can determine the liquid limit of soil.
Casagrande's Method
IS: 2720 (Part 5), IS: 9259, BS: 1377, ASTM: 89
  • Mechanical method known as the Casagrande Method has been the standardized test in Soil Mechanics for many years. High quality of design ensures consistency of results
  • Satisfies International Standards
  • Motorised model with integral blow counter available
The Liquid Limit Device consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1 cm on to the hard rubber base, by the help of a lead screw provided at the back of the sliding carriage. Supplied complete with Casagrande Grooving Tool and Gauge Block (Type A of IS: 9259)
SSO-1022
Liquid Limit Device complete with Casagrande's grooving tool and gauge block
SSO-1022001
Casagrande's Grooving Tool and Gauge Block
SSO-1022002
ASTM Grooving Tool
SSO-1022003
Bowl
SSO-1022004
Gauge Block
SSO-1023
Liquid Limit Device complete with Casagrande's grooving tool, gauge block and Counter
SSO-1023001
Counter
View Complete Details

PORE PRESSURE

The pore pressure measuring apparatus consists of a screw pressure pump, null indicator in Perspex, pressure gauge, mercury manometer, volume change burette and the necessary connecting tubes and valves. It is used for measuring pore water pressure and pore air pressure in soils. It has many features, which simplify the operation. The Null Indicator is made from a transparent Perspex block. It is a simplified U-Tube Null Indicator, in which water can bypass mercury if null indicator is tilted; thus de-airing process by circulation of water is facilitated. All features enable a visual check to be made during the de-airing operation of apparatus. A mercury manometer and a pressure gauge of Bourdon Tube type are provided on the panel on which the whole equipment is mounted. Very small positive or negative pressures are observed on the manometer. A 50 ml burette is clamped to a sliding bracket on one side of the panel. It is used for measuring the volume change in the specimen when subjected to confining pressure in the triaxial cell The following models of Pore Pressure Apparatus are offered
SSO-1034
Pore Pressure Apparatus, 1000 kPa (10 kg/cm2) capacity
SSO-1035
Pore Pressure Apparatus, 2000 kPa (20 kg/cm2) capacityThe equipment consists of
Pressure Gauge, Bourdon Tube Type, Graduation: -1.0 to +10 bar in 0.1 bar division (or -100 to +1, 000 kPa in 10 kPa divisions) Dia: 200 mm
Pressure Gauge, Bourdon Tube type, Graduation: 0 to 20 bar in 0.1 bar Divisions. (or 0 to 2, 000 kPa in 10 kPa divisions) Dia : 200 mm
Manometer, Glass U Tube, measures low positive and negative pore pressure and checks zero error of pressure gauge. It is provided with a mercury trap. (Mercury supplied at extra cost)
Null Indicator, Perspex with mercury trap and cursor to indicate the mercury level
Burette, 50 ml, for measurement of volume change in the soil specimen
Pressure Pump, fitted with four Ball Valves
Copper Coil
Water Reservoir
NoteAll the above parts are fixed on a panel suitable for mounting on the wall.
SSO-1036
Proctor Penetrometer, Spring Type, 0-40 kg x 1
SSO-1037
Proctor Penetrometer, Hydraulic Type, 0-40 kg x 2
View Complete Details

Coal Testing Equipment

  • Chamber Size (W x H x D) a. 300x300x300mm (12"x12"x12") 2 b. 350x350x350mm (14"x14"x14") 2 c. 450x450x450mm (18"x18"x18")
  • Trays 2, 2, 2, 2, 2, 2,
Double walled construction. Inner chamber made of anodized Aluminum S.Steel. Outer body made of mild steel is powder coatedpainted. Temperature thermostatically controlled by hydraulic thermostat from 50C-250C. Elements are at the bottom and sides. Built in 'L' shape thermometer. The gap between the inner & outer chamber is filled with high grade glass wool to avoid the thermal losses and having perforated adjustable trays.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Manufacturer of Testing Equipment from Delhi, Delhi by SHIVAM INSTRUMENTS
Post Buy Requirement
SI

SHIVAM INSTRUMENTS Delhi

Delhi, India
Add Review

Our Products

  1. Laboratory Apparatus 17 Products available
  2. Laboratory Equipments 12 Products available
  3. Testing Equipment 5 Products available
  4. Industrial Machinery 4 Products available
  5. Soil Testing Equipment 3 Products available
  6. Laboratory Shakers 3 Products available
  7. Laboratory Ovens 3 Products available
  8. Cooling Tower, Heat Exchanger & Parts

    2 Products available
  9. Measuring Instruments & Equipment

    2 Products available
  10. Viscosity Instruments

    2 Products available
  11. Others Products 64 Products available

Testing Equipment #682912

We offer the best product range of Flash Point Tester, Scratch Hardness Tester, liquid limit, PORE PRESSURE and coal testing equipment.

Flash Point Tester

  • sizes B-1, B-2, B-3, B-4, B-5
The paint film is bent through 180 over a 6.35 mm dia rod and examined for any damage, detachment or cracking of the film. The tester consists of two plates hinged at one end with the help of a 6.35 mm dia rod. A stop is provided on one plate against which the painted panel can be held. Complete with x10 magnifier
View Complete Details

Scratch Hardness Tester

  • Weight, 2 kg
  • Optional Extras Needle
The apparatus consists of a 1mm dia hemispherical stainless steel needle, fixed to a platform of a counter- balanced rod, which is assembled on a grooved platform. A rack moves through the groove, to which a painted panel can be clamped. An indicator lamp is provided to indicate the metal contact if the Needle penetrates the paint surface to make contact with the metal. Complete with 1 kg weight. Suitable for operation of 230 V, 50 Hz, single phase, AC supply
View Complete Details

Liquid Limit

The liquid limit, defined as the moisture content at which the soil passes from the plastic state to the liquid state, is very helpful in the classification of the potential properties of the soil material. The liquid limit gives a measure of the shearing resistance which a soil has when mixed with water. Casagrande Method or Cone Penetrometer Method can determine the liquid limit of soil.
Casagrande's Method
IS: 2720 (Part 5), IS: 9259, BS: 1377, ASTM: 89
  • Mechanical method known as the Casagrande Method has been the standardized test in Soil Mechanics for many years. High quality of design ensures consistency of results
  • Satisfies International Standards
  • Motorised model with integral blow counter available
The Liquid Limit Device consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1 cm on to the hard rubber base, by the help of a lead screw provided at the back of the sliding carriage. Supplied complete with Casagrande Grooving Tool and Gauge Block (Type A of IS: 9259)
SSO-1022
Liquid Limit Device complete with Casagrande's grooving tool and gauge block
SSO-1022001
Casagrande's Grooving Tool and Gauge Block
SSO-1022002
ASTM Grooving Tool
SSO-1022003
Bowl
SSO-1022004
Gauge Block
SSO-1023
Liquid Limit Device complete with Casagrande's grooving tool, gauge block and Counter
SSO-1023001
Counter
View Complete Details

PORE PRESSURE

The pore pressure measuring apparatus consists of a screw pressure pump, null indicator in Perspex, pressure gauge, mercury manometer, volume change burette and the necessary connecting tubes and valves. It is used for measuring pore water pressure and pore air pressure in soils. It has many features, which simplify the operation. The Null Indicator is made from a transparent Perspex block. It is a simplified U-Tube Null Indicator, in which water can bypass mercury if null indicator is tilted; thus de-airing process by circulation of water is facilitated. All features enable a visual check to be made during the de-airing operation of apparatus. A mercury manometer and a pressure gauge of Bourdon Tube type are provided on the panel on which the whole equipment is mounted. Very small positive or negative pressures are observed on the manometer. A 50 ml burette is clamped to a sliding bracket on one side of the panel. It is used for measuring the volume change in the specimen when subjected to confining pressure in the triaxial cell The following models of Pore Pressure Apparatus are offered
SSO-1034
Pore Pressure Apparatus, 1000 kPa (10 kg/cm2) capacity
SSO-1035
Pore Pressure Apparatus, 2000 kPa (20 kg/cm2) capacityThe equipment consists of
Pressure Gauge, Bourdon Tube Type, Graduation: -1.0 to +10 bar in 0.1 bar division (or -100 to +1, 000 kPa in 10 kPa divisions) Dia: 200 mm
Pressure Gauge, Bourdon Tube type, Graduation: 0 to 20 bar in 0.1 bar Divisions. (or 0 to 2, 000 kPa in 10 kPa divisions) Dia : 200 mm
Manometer, Glass U Tube, measures low positive and negative pore pressure and checks zero error of pressure gauge. It is provided with a mercury trap. (Mercury supplied at extra cost)
Null Indicator, Perspex with mercury trap and cursor to indicate the mercury level
Burette, 50 ml, for measurement of volume change in the soil specimen
Pressure Pump, fitted with four Ball Valves
Copper Coil
Water Reservoir
NoteAll the above parts are fixed on a panel suitable for mounting on the wall.
SSO-1036
Proctor Penetrometer, Spring Type, 0-40 kg x 1
SSO-1037
Proctor Penetrometer, Hydraulic Type, 0-40 kg x 2
View Complete Details

Coal Testing Equipment

  • Chamber Size (W x H x D) a. 300x300x300mm (12"x12"x12") 2 b. 350x350x350mm (14"x14"x14") 2 c. 450x450x450mm (18"x18"x18")
  • Trays 2, 2, 2, 2, 2, 2,
Double walled construction. Inner chamber made of anodized Aluminum S.Steel. Outer body made of mild steel is powder coatedpainted. Temperature thermostatically controlled by hydraulic thermostat from 50C-250C. Elements are at the bottom and sides. Built in 'L' shape thermometer. The gap between the inner & outer chamber is filled with high grade glass wool to avoid the thermal losses and having perforated adjustable trays.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us