Other Products / Services #2257743

We are the top class JIB Cranes manufacturer and supplier based in Gujarat. Our team follows the basic parameters such as type, capacity, span and lift & speed for manufacturing this equipment. By following the Indian Standard IS: 13834 we sign up for crane classification with respect to design, type of load, and state of loading and operation time. The JIB cranes are applied for normal indoor and outdoor, fire-resistant area and seismic zone.

Special features :

• Highly efficiently squirrel cage motors which especially designed for crane are applied and comply with IEC/IS:325 specification with insulation F degree and start torque over 200%.
• Use reputed make electromagnetic disc/drum type brake, to perform the brake torque over 250% with durable wear-resisting, long life, rapid reaction, low noise and convenient for maintenance.
• Integrated motor, brake and gear box for travel & slewing motions to easy fabrication and maintenance.
• Soft start and stop in travel & slewing motions suitable for DOL start motor OR Micro speed through VVVF drive.
• For a long lasting, a high speed and a large capacity lifting, we utilize the eddy current speed control for a better function of initial lowering speed control. Due to eddy current is without brake lining and no touching, it is long lasting and almost trouble free.
• Limit switches provided on each motion to prevent accident.
• Girder : Box/Beam/Trapezoid type, Girder's design is based on major standard requirements. It takes safe working load, girder span/arm length, application surrounding and class of usage into considerations.
• Electric Feeder System : We are using ‘C’ rail / Drag chain / ’T’ Track festoon system as per client requirement.

Technical Specification :

• Type : Single Girder- Pillar Mounted / Wall Mounted
• Slewing Motion : Manually operated / Electric operated
• Capacity : 0.5T to 10T
• Design standard : IS: 15419, IS:3938, IS:807, IS:800 / JIS / FEM / DIN
• Application for : Normal outdoor or indoor / Flame proof (Hazardous) area / Seismic Zone.
• Basic parameter as per client requirement : Type, Capacity, Span (arm length), Lift & Speed.
• We are following Indian Standard IS : 13834 for Crane Classification with respect to design effective parameters like type of load, state of loading and operation time etc.

We are a well-known manufacturer and supplier of Crane Spare Parts. Being a service provider for material handling equipment spare parts, we have on offer the following Crane spare parts :

• Motor Brake Limit Switch
• VVVF Drives Panel
• DSL Current Collector
• CRD- Spring/Motorized Push button Radio
• Remote control Drag chain Load cell
• Anti-collision device Hook
• Level indicator Oil seal Bearings
• Coupling Wire rope Slings
• Cable trolley & tray Wheel Gear,
• Pinion & Shaft Rope drum
• Hook Buffer Lifting beam
• Grab bucket Cradle
• 'C’ type fabricated lifting hook

We are the manufacturer and supplier of Wheel Flange Graphite Lubrication System, based in Karamsad, Gujarat. Our product is applicable in Heavy Duty Crane, Transfer Car & Trolley for steel plant / chemical plant / hazardous area etc.  The wheel flanges are lubricated by high grade special graphite stick. This increases the lifeline of the crane wheels by 2-3 times at no maintenance cost.

Applications :

• Heavy Duty Crane
• Transfer Car & Trolley for steel plant / chemical plant / hazardous area etc.
• Lubrication of wheel flanges by high grade special graphite stick
• The life of crane wheels will increase around 2-3 times with no maintenance cost.

Applicable in cranes, trolley & transfer cars for Steel industry, Mining industry, Power sector, Shipyard, Heavy engineering industry etc.

Graphite lubricant just reduces friction where two metal surfaces rub together. If you lubricate wheel flanges, there is no need to install such a hard wheel flange. This is a very inexpensive way to solve a huge problem that most companies have. Replacing wheel assemblies due to flange wear is the critical maintenance problem for overhead cranes/trolleys in a steel mill and foundry. It is very expensive compare to dry lubrication system. The lubricant will also help greatly with track that is out of alignment.

Lubrication Stick :The Lubrication Stick is an advanced dry, solid lubricant designed to lubricate. Lubrication Sticks are particularly effective and suited for flanged wheel applications where wear can result in expensive outage or dangerous failure. Lubrication sticks can reduce the steel-on-steel coefficient of friction from 0.60 to less than 0.10.

Unlike liquids or grease, our lubricant stays where you put it. It won’t run or drip and will not migrate to the wheel tread or top of the rail. When it comes time to refill, there’s nothing to pump or spill. Just open the system cap, and drop in a stick. On average, the stick will last a month or longer, depending on the crane’s operating time.

Lubrication Stick Applicator : The lubrication stick applicator is fully steel assembly including a spring that presses the lubrication stick against the part to be lubricated and a sure-locking end cap to make refilling quick and easy. The lubrication stick applicator has been simplified over the years and reduced to a single moving part

brake lining material non-asbestos for long life,

grade 80 case hardened alloy steel load chain confirm to iso and din standard,

dual ratchet pawls for long life and safety,

double housing protection to prevent wet and dirt,

both gear and hand chain wheel are protected by hydraulic drew cases which is ideally shaped and rugged to be able to withstand external shocks,

hardened compound treat gears for long life,

hot forged hooks with thrust bearing and safety latch according to iso/jis standard.

type :single girder- pillar mounted / wall mounted

slewing motion :manually operated / electric operated

capacity :0.5t to 10t

design standard :is: 15419, is:3938, is:807, is:800 / jis / fem / din

application for :normal outdoor or indoor / flame proof (hazardous) area / seismic zone.

basic parameter as per client requirement :type, capacity, span (arm length), lift & speed.

we are following indian standard is:13834 for crane classification with respect to design effective parameters like type of load, state of loading and operation time etc.

highly efficiently squirrel cage motors which especially designed for crane are applied and comply with iec/is:325 specification with insulation f degree and start torque over 200%.

use reputed make electromagnetic disc/drum type brake, to perform the brake torque over 250% with durable wear-resisting, long life, rapid reaction, low noise and convenient for maintenance.

integrated motor, brake and gear box for travel & slewing motions to easy fabrication and maintenance.

soft start and stop in travel & slewing motions suitable for dol start motor or micro speed through vvvf drive.

for a long lasting, a high speed and a large capacity lifting, we utilize the eddy current speed control for a better function of initial lowering speed control. Due to eddy current is without brake lining and no touching, it is long lasting and almost trouble free.

limit switches provided on each motion to prevent accident.

girder:box/beam/trapezoid type, girder's design is based on major standard requirements. It takes safe working load, girder span/arm length, application surrounding and class of usage into considerations.

electric feeder system :we are using c rail / drag chain / t track festoon system as per client requirement.

SHIVA PROJECTS is best Service Provider for SPARE PARTS of Material Handling Equipment.

Lifting beam, Grab bucket, Cradle, C type fabricated lifting hook, Oil seal, Bearings, Coupling, Wire rope, Slings , Cable trolley & tray, Wheel, Gear, Pinion & Shaft, Rope drum, Hook, Buffer, etc.

Motor, Brake, Limit switches, VVVF Drives, Panel, Push button, Radio remote control, Load cell, Anti-collision device, Hook level indicator etc.

DSL system, Current Collector, CRD- Spring/Motorized, Drag chain etc.

We are a popular manufacturer and supplier of Industrial Drum Lifting Machine. Our drum lifting equipment are made to 200-800kg capacity for both steel and plastic materials.  Checkout its exclusive features :

• Single acting cylinder piston rod inducted with hard chrome plating
• Polyurethane and Teflon seals
• Leak proof viper seals
• Wheels with mechanical braking system
• Hydraulic power pack for the electric operating system

Technical Specification :

• Drug Lifting Equipment
• Capacity : 200kg to 800kg for steel/plastic drum
• Design standard : IS:3832 / JIS / FEM / DIN etc.

We are the manufacturer and supplier of Crane Winch based in Karamsad, Gujarat. We make the winches for 0.5 to 5T capacity. Applicable for indoor, outdoor, flame proof, and seismic zones, the crane winches exhibit some salient features.

Features :

• Highly efficiently squirrel cage motors
• Electromagnetic braking system or thrusters brake
• Gear system made of alloy steel with surface harden treatment
• Wire rope as per IS:2266 / JIS
• Limit switches provided as preventive measure

Technical Specification :

• Capacity: 0.5T to 5T
• Design standard: IS:3938 / JIS / FEM / DIN etc.
• Application for: Normal outdoor or indoor / Flame proof (Hazardous) area / Seismic Zone

Special Features :

Highly efficiently squirrel cage motors which especially designed for crane are applied and comply with IEC/IS:325 specification with insulation F degree and start torque over 200%.

Electromagnetic braking system or thrusters brake for safe operation,

Gear system are made of alloy steel with surface harden treatment for long lasting life span,

Wire rope as per IS:2266,

Hot forged hooks with thrust bearing and safety latch according to ISO/JIS standard.

Limit switches provided on hoisting to prevent accident.