Our Products
Filters & Filtration Systems
2 Products availablePetrochemicals & Petroleum Products
2 Products availableIndustrial Chemicals
2 Products availableAdhesives
1 Products availablePaints
1 Products availablePrimer Paint
1 Products availableInsulators, Mineral Wool, Glass Wool & Insulation Materials
1 Products availableOur Complete range of products are Shalitex Board, Dura Silfil Armour Board Supreme, polyfelt, TarFelt LM and super silver shield.
XPS BOARD is an Extruded Polystyrene (XPS) rigid board used for thermal insulation. It is produced from general purpose polystyrene by the process of extrusion. These extruded sheets have a closed-cell structure and virtually no air-voids in between the cells. Globally XPS has been widely used for thermal insulation since the last 40 years. It is acknowledged to be one of the best 'value-for-money' thermal insulation materials. In India XPS is manufactured by Supreme Petrochem Ltd (SPL) as INSUboard at India's first integrated ultra-modern manufacturing facility at Nagothane, Maharashtra. This eco-friendly plant has an annual production capacity of 150, 000 m3 and is part of the 333 acre styrenics complex of Supreme Petrochem Ltd.
Additional Information:
Delivery Time : As per the area
Shalitex Expansion Joint Board is cane fiber soft board impregnated with Special Grade of Bitumen. It is a perfect base material for expansion joint filers. The board's compression and recovery characteristics conform to the U.K., U.S.A. and Indian Standards much above the required averages. Shalitex Expansion Joint Board displays excellent resistance to compression, with outstanding recovery characteristics. The boards are environment friendly as opposed to the environment destroying thermos Cole/plastic expansion joint boards.
construction of concrete roads, runways, floor and roof slabs of buildings, involves the casting of concrete in slab form, which leads to construction joints. provision must be made to accommodate the expansion and contraction at these joints which occur with seasonal variations in temperature. our bitumen impregnated expansion joint fillers boards display excellent resistance to compression, with outstanding recovery characteristics. provision of these boards in the joints permits free movement of the concrete slabs. this prevents damage to the slabs besides providing waterproofing and resisting the entry of foreign matter into the joints
Additional Information:
Packaging Details : pieces
Delivery Time : AS per the area
Shali Plus 20 is a polymeric waterproofing membrane. It has a center core of 20 micron High Molecular High Density Polyethylene (HMHDPE) film coated on both sides with Polymer Modified Bitumen, which is protected by a thermo fusible film. The HMHDPE Film is the reinforcement barrier against water and moisture. The polymeric membrane has an elongation exceeding 300% to absorb all structural movements and has a very high tensile strength and cold flexibility to adapt to all contours.
Shali Plus 20 is also available with 40 micron aluminum topping on the top side to prevent disintegration of bitumen and provide UV protection
Super Thermolay is a uniquely formulated prefabricated waterproofing Membrane with a special multilayered design, with superiorpliability, tensile strength, workability and resistance to the elements. This combination gives the proven waterproofing qualities of bitumen plasticity, excellent resistance to heat, aging and weathering, and ease of application by torch welding. The multilayered design consists of a 160 gsm polyester core coated on both sides with APP (atactic polypropylene) modified bitumen and finally finished with thermofusible polyethylene film. The polyester core gives the membrane high tensile strength, elongation and superior lap joint strength.
TarFelt LM is a single component, water based elastomeric polymerized bituminous emulsion with selected graded fine fillers and some additives TarFelt LM is applied by brush / roller without any use of heat. TarFelt LM forms a tough, elastomeric, monolithic, seamless water proofing membrane. For non-trafficable roofs, TarFelt LM may be coated with SuperSilverShield (aluminium finish) or with ShaliCryl 215 providing desired colours for aesthetic look or simply by sprinkling sand. For Trafficable roofs / areas, TarFelt LM shall be protected with screed / tiles / china mosaic. TarFelt LM +, in addition to properties of TarFelt LM, provides insulation.
ApplicationsAvailable in 20 kg pack.
StorageStore in a cool dry place, under shed, away from heat.
Shelf Life1 year in original unopened sealed condition.
Recommended for sticking roofing felts on metal, timber, tiles, asbestos, concrete and masonry surfaces, including roofs of trains, buses, tramcars, railway carriages, etc.
AdvantagesShaliBond BS/CS is cold applied adhesive and does not require any torching. Therefore, it is useful for applications where use of hot bitumen / torching is difficult or prohibited.
Health & SafetyAvailable in 1 Kg, 4 kg, 18 Kg and 180 Kg drums.
StorageKeep in cool and dry place in air tight container under shed away from heat.
Additional Information:
Delivery Time : As per the area
SuperSilverShield is an anti-corrosive, water proofing paint with aluminum finish, It is composed of oxidized bitumen, volatile solvents and specially formulated aluminum compound.
ApplicationSuperSilverShield is used as a protective coating on iron, steel, masonry and other surfaces. It is used to reflect UV rays and protect bituminous waterproofing felts and fabrics, while giving a visually pleasing finish. It covers, in normal conditions.
Available in 20 Ltrs drums.
Available in 26 Kgs and 260 Kgs containers.
StorageKeep in cool and dry place under shed away from heat. Keep lid of container closed tightly when not in use.
ShaliTex Primer is a solvent based bituminous primer that seals pores in surfaces such as concrete and improves the adhesion of bituminous materials that are to be applied to the substrate. It is suitable for brush or spray application. It conforms to the requirement of IS: 3384-1986.
Application
ShaliTex Primer is available in 20 Ltr & 200 Ltr drums.
StorageKeep in cool and dry place in air tight containers under shed away from heat.
Application Methodology
Additional Information:
Delivery Time : According to the area
TheAPP membrane, short for Atactic PolypropyleneMembrane, is a special waterproofing material that is manufactured from Bitumen. They come in rolls. . It is a common waterproofing material used on concrete flat roofs (which are still roofs) or roofs with a low pitch.
ShaliTex Sealing Compound is bitumen based sealant for concrete joints resistant to high temperature variations providing waterproof sealing for all type of horizontal joints. It is conforming to IS 1834 1984, Grade A specification.
ApplicationsShaliJet Sealing Compound is thermoplastic material. It flows in hot condition and settles to a plasto-elastic mass when cold. Being fuel / heat resistant, ShaliJet Sealing Compound is used as sealant in construction of runways.
ApplicationsAvailable in 26 Kgs and 260 Kgs drums.
StorageKeep in cool and dry place under shed away from heat
break is rapid even when coarse aggregate of relatively low surface area.rapid setting emulsion is further sub divided into rs-1 and rs-2 types.
.Additional Information:
Delivery Time : As per the area
bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn't mix with water and as it is sticky, it doesn't easily get disintegrated into fine droplets. To overcome this problem an emulsifier is used
rapid setting emulsion (rs)* medium setting emulsion (ms)*slow setting emulsion (ss)
Additional Information:
Delivery Time : As per the Area
the break is sufficiently slow to allow mixing with aggregate containing fine material of relatively high surface area. The slow setting emulsion is further subdivided into ss-1 and ss-2 types.
Additional Information:
Delivery Time : AS per the area
it is the most common grade of bitumen which is using in worldwide bitumen market as an adhesive, sealant, waterproofing agent, damp-proof construction and maintenance of the road, airfields and pool lining, soundproof and acoustic, pipe coating and paving along with other thousands application with below technical specification.
this grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.
penetration grade bitumen supplied by and is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air.
the bitumen supplied is produced from remain of crude oil after cracking and removing hydrocarbon.
the penetration grade bitumen 60/70 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled.
this grade of bitumen 60/70 has very strong viscosity compare to other grades.
.
Additional Information:
Packaging Details : barrels
Delivery Time : As per the area
Bitumen. Thebitumengrade85/25means the softening point is 85c and penetration is 25 desi millimetre is produced in compliance and conformity with ASTM standard and meets the followingspecification.
Additional Information:
Packaging Details : Barrels
Delivery Time : As per the area
Additional Information:
Delivery Time : According to the area
This board is a resilient closed cell polyethylene joint filler. It is suitable for use as joint filler in buildings and other concrete structures where a readily compressible joint filler is required.
Advantage