Post Buy Requirement
SC
Delhi, India
Add Review

Other Products / Services #1513260

Surge Arrestor

  • Frequency Range 0.8GHz~2.5GHz
  • VSWR ≤1.1@800-2500 MHz
  • Insertion Loss ≤ 0.1dB
  • Power(Max) 1000W
  • Insulation ≥1x104MΩ
  • Impedance 50Ω
  • Current (KA@8/2µS)
  • Connector 7/16 Din(F), 7/16 Din(M)
Dealing in Surge Arrestor.
View Complete Details

Wiring Harness

Wiring Harness for each vertical of automotive Industry, as small as 2 wheeler to as big as Commercial vehicle harness, Shilpi Cable gives solutions to wiring connectivity of a vehicle from modular to complete assembly from head to tail

  • Harness for 2/3 Wheelers
  • Harness for Commercial Vehicles
  • Harness for Utility Vehicles
  • Harness for Tractors

Note:Values typical, guaranteed within 5 % Any dimension could be changed without prior information under the organization's continual

View Complete Details

Telephone Cords

Telephone cords is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house.
View Complete Details

RF CABLE CLAMP

Each Cable Clamp product conforms to most or all brands coaxial cable and are designed to ulimately ease the installation process. Without additional adapters. these clamps can provide sturdy, reliable long term support to system by means of tough and UV material.

Notice:

Please be careful to protect the surface of C-Frame and hardware. Shilpi disclaims any resposibility for the result of improper usage.

Regulatory Compliances RoHS Compliant (S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007

Material And Surface Treatment

Clamp PLastic cable clamp Polypropylene
C-Frame C-Frame Stainless steel SUS304
Hardware Bolt, hex hut, flat washer, bowl washer, threaded rod Stainless steel SUS304
View Complete Details

Cable Entry

Application:

Cable entry gives you convenience to install more cables in less space, consists of an entry frame and entry seal modules. Each seal module consists of two halves of flexible material matching the different type cable. The seal module is tighened, sealing the entry, that marks the result cable definitely should be compact, watertight, and operation can be opened and resealed as necessary to upgrade system, so it supports your future growth, changes configurations, or perform maintenance.

View Complete Details

Weatherproofing Kit

  • UV Resistance Test Method Butyl test method in QUV weatherometer cycle of 8 hours UV at 150 °F then 4 hrs of condensation at 104 °F| PVC tape test method UL 510, ASTM D1000
  • UV Resistance, minimum with no degradation ≥ 1000 hours
  • Weather Resistance Test Method 04AS00 03.6.0 | MIL STD 1344A, Method 1002
  • Insulation resistance >10 Megohms
  • Flammability: Pass

Weatherproofing kit for connectors and splices, include butyl rubber tape and PVC tape . It provides a multi-layer, long-term environmental seal over multiple connections.This specially designed kit is made to give a longer life to the wires and connections.

It includes:
  1. Six rolls of 2-1/2'' butyl rubber tape
  2. Two rolls of 3/4'' (19mm) PVC Electrical tape.
  3. One roll of 2'' (51 mm) PVC Electrical Tape.
Features
  • The application of sealing materials to antenna, cable and grounding connections
  • The application of sealing materials to antenna, cable and grounding connections, protecting them from weather conditions
  • These prevent moisture penetration and loosening of connections from vibrations caused by strong winds
Electrical Tape

Electrical tape used in Shilpi weatherproofing kits is a high quality insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid, copper corrosion and varying weather conditions (including sunlight).

Advantages
  • Excellent self amalgamating and high adhesiveness
  • Good compatibility with other material
  • Easy to match various shaped surface
  • Good water-proof property
  • UV- and ozone-resistant
Butyl Tape

Butyl tape used in Shilpi weatherproofing kits is an elastomeric butyl rubber-based extruded sealant on silicon release paper, designed for sealing a variety of construction joints.This product is very resistant to ultraviolet light.

Application
  • Repairing outer sheath of telecom cable
  • For water-proof protection of joint of telecom equipment antenna and feeder
  • For water-proof protection of joint of aerial insulation conductor
Notice:

Please be careful to protect the surface of C-Frame and hardware. Shilpi disclaims any resposibility for the result of improper usage.

Regulatory Compliances RoHS Compliant (S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007
View Complete Details

Din Female- N Male Adapter

  • Color Straight
  • Device Type 7/16 DIN Female
  • Interface N Male
View Complete Details

Ceiling Mount Omni Antenna

  • Device Type Tetra GSM Omni Antenna
  • Interface N Female
  • Radome Color White/Grey
  • Radome Material ABS UV Resistant
  • Reflector Material Aluminium Alloy
  • Mounting Clamp would be provided
  • Dimension 264 x 145 mm
  • Weight 540gms
View Complete Details

CAVITY COUPLER

  • Application Indoor and Outdoor, IP65
  • Frequency Range 800-960MHz, 1700-2500MHz
  • Impedence 50Ω
  • Input VSWR 1.35:1 maximum
  • Power Rating 200 W
  • Temperature Range -40 °C~+80 °C
  • Connectors N Female
We are offering cavity coupler

Coupling SARCCP05 SARCCP06 SARCCP07 SARCCP10
Output VSWR 1.35:1 maximum      
Attenuation 5±0.6dB 6±0.6dB 7±0.6dB 10±0.8dB
Insetion Loss ≤2.0dB ≤1.5dB ≤1.3dB ≤0.7dB

Coupling SARCCP15 SARCCP20 SARCCP25 SARCCP30
Output VSWR        
Attenuation 15±1.2dB 20±1.5dB 25±1.6dB 30±2dB
Insetion Loss ≤0.25dB ≤0.25dB ≤0.25dB ≤2.5dB
View Complete Details

Power Cord

Electrical equipment and appliances came with a power cord, which connects them to mains via an electric plug mounted on a wall. Some of these power cords are fixed whereas, others are detachable. Detachable power cords come with a socket at one end and a pin at the other. Fixed power cords are attached with the appliance. Some of these cords, which are attached with sensitive instruments or audio/video equipment contain a shield in order to, minimize electromagnetic interference. Same power cord can be used with multiple devices and appliances depending upon the socket or the pin. Power cords sets are available in market and they come with few accessories such as leakage current detector, pilot lamp and fuses for over-current protection. We manufacture high quality power cords, duly tested and checked by our experts. These cords are safe to use and ensure high performance of the appliance attached with.

View Complete Details

Grounding Kit

This product is used for mobile network and telecommunication equipment. Grounding kit is a coaxial cable accessory, protecting the coaxial cable system from the damaging effects of lightning, by offering a quick Return path to ground.It is recommended to provide Grounding kit on the RF feeder cable at the top and bottom of the Antenna tower and at the entrance of the transmitter / Receiver.

Features
  • Quick and easy installation
  • No loose part
  • No damage to feeder cable
  • Low Contact Resistance (
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by Shilpi Cable Technologies Ltd from Delhi, Delhi.
Post Buy Requirement
SC

Shilpi Cable Technologies Ltd

Add Review

Our Products

  1. Wires 16 Products available
  2. Rope

    2 Products available
  3. Earthing Equipment

    1 Products available
  4. Router, Cables & Networking Devices

    1 Products available
  5. Electrical & Signaling Contractors

    1 Products available
  6. Wiring Harness

    1 Products available
  7. Adapter

    1 Products available
  8. Antenna

    1 Products available
  9. Fuses, Circuit Breakers & Components

    1 Products available
  10. Clamps

    1 Products available
  11. Others Products 3 Products available

Other Products / Services

We are leaders in the market for providing best range of cable entry

Surge Arrestor

  • Frequency Range 0.8GHz~2.5GHz
  • VSWR ≤1.1@800-2500 MHz
  • Insertion Loss ≤ 0.1dB
  • Power(Max) 1000W
  • Insulation ≥1x104MΩ
  • Impedance 50Ω
  • Current (KA@8/2µS)
  • Connector 7/16 Din(F), 7/16 Din(M)
Dealing in Surge Arrestor.
View Complete Details

Wiring Harness

Wiring Harness for each vertical of automotive Industry, as small as 2 wheeler to as big as Commercial vehicle harness, Shilpi Cable gives solutions to wiring connectivity of a vehicle from modular to complete assembly from head to tail

  • Harness for 2/3 Wheelers
  • Harness for Commercial Vehicles
  • Harness for Utility Vehicles
  • Harness for Tractors

Note:Values typical, guaranteed within 5 % Any dimension could be changed without prior information under the organization's continual

View Complete Details

Telephone Cords

Telephone cords is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house.
View Complete Details

RF CABLE CLAMP

Each Cable Clamp product conforms to most or all brands coaxial cable and are designed to ulimately ease the installation process. Without additional adapters. these clamps can provide sturdy, reliable long term support to system by means of tough and UV material.

Notice:

Please be careful to protect the surface of C-Frame and hardware. Shilpi disclaims any resposibility for the result of improper usage.

Regulatory Compliances RoHS Compliant (S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007

Material And Surface Treatment

Clamp PLastic cable clamp Polypropylene
C-Frame C-Frame Stainless steel SUS304
Hardware Bolt, hex hut, flat washer, bowl washer, threaded rod Stainless steel SUS304
View Complete Details

Cable Entry

Application:

Cable entry gives you convenience to install more cables in less space, consists of an entry frame and entry seal modules. Each seal module consists of two halves of flexible material matching the different type cable. The seal module is tighened, sealing the entry, that marks the result cable definitely should be compact, watertight, and operation can be opened and resealed as necessary to upgrade system, so it supports your future growth, changes configurations, or perform maintenance.

View Complete Details

Weatherproofing Kit

  • UV Resistance Test Method Butyl test method in QUV weatherometer cycle of 8 hours UV at 150 °F then 4 hrs of condensation at 104 °F| PVC tape test method UL 510, ASTM D1000
  • UV Resistance, minimum with no degradation ≥ 1000 hours
  • Weather Resistance Test Method 04AS00 03.6.0 | MIL STD 1344A, Method 1002
  • Insulation resistance >10 Megohms
  • Flammability: Pass

Weatherproofing kit for connectors and splices, include butyl rubber tape and PVC tape . It provides a multi-layer, long-term environmental seal over multiple connections.This specially designed kit is made to give a longer life to the wires and connections.

It includes:
  1. Six rolls of 2-1/2'' butyl rubber tape
  2. Two rolls of 3/4'' (19mm) PVC Electrical tape.
  3. One roll of 2'' (51 mm) PVC Electrical Tape.
Features
  • The application of sealing materials to antenna, cable and grounding connections
  • The application of sealing materials to antenna, cable and grounding connections, protecting them from weather conditions
  • These prevent moisture penetration and loosening of connections from vibrations caused by strong winds
Electrical Tape

Electrical tape used in Shilpi weatherproofing kits is a high quality insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid, copper corrosion and varying weather conditions (including sunlight).

Advantages
  • Excellent self amalgamating and high adhesiveness
  • Good compatibility with other material
  • Easy to match various shaped surface
  • Good water-proof property
  • UV- and ozone-resistant
Butyl Tape

Butyl tape used in Shilpi weatherproofing kits is an elastomeric butyl rubber-based extruded sealant on silicon release paper, designed for sealing a variety of construction joints.This product is very resistant to ultraviolet light.

Application
  • Repairing outer sheath of telecom cable
  • For water-proof protection of joint of telecom equipment antenna and feeder
  • For water-proof protection of joint of aerial insulation conductor
Notice:

Please be careful to protect the surface of C-Frame and hardware. Shilpi disclaims any resposibility for the result of improper usage.

Regulatory Compliances RoHS Compliant (S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007
View Complete Details

Din Female- N Male Adapter

  • Color Straight
  • Device Type 7/16 DIN Female
  • Interface N Male
View Complete Details

Ceiling Mount Omni Antenna

  • Device Type Tetra GSM Omni Antenna
  • Interface N Female
  • Radome Color White/Grey
  • Radome Material ABS UV Resistant
  • Reflector Material Aluminium Alloy
  • Mounting Clamp would be provided
  • Dimension 264 x 145 mm
  • Weight 540gms
View Complete Details

CAVITY COUPLER

  • Application Indoor and Outdoor, IP65
  • Frequency Range 800-960MHz, 1700-2500MHz
  • Impedence 50Ω
  • Input VSWR 1.35:1 maximum
  • Power Rating 200 W
  • Temperature Range -40 °C~+80 °C
  • Connectors N Female
We are offering cavity coupler

Coupling SARCCP05 SARCCP06 SARCCP07 SARCCP10
Output VSWR 1.35:1 maximum      
Attenuation 5±0.6dB 6±0.6dB 7±0.6dB 10±0.8dB
Insetion Loss ≤2.0dB ≤1.5dB ≤1.3dB ≤0.7dB

Coupling SARCCP15 SARCCP20 SARCCP25 SARCCP30
Output VSWR        
Attenuation 15±1.2dB 20±1.5dB 25±1.6dB 30±2dB
Insetion Loss ≤0.25dB ≤0.25dB ≤0.25dB ≤2.5dB
View Complete Details

Power Cord

Electrical equipment and appliances came with a power cord, which connects them to mains via an electric plug mounted on a wall. Some of these power cords are fixed whereas, others are detachable. Detachable power cords come with a socket at one end and a pin at the other. Fixed power cords are attached with the appliance. Some of these cords, which are attached with sensitive instruments or audio/video equipment contain a shield in order to, minimize electromagnetic interference. Same power cord can be used with multiple devices and appliances depending upon the socket or the pin. Power cords sets are available in market and they come with few accessories such as leakage current detector, pilot lamp and fuses for over-current protection. We manufacture high quality power cords, duly tested and checked by our experts. These cords are safe to use and ensure high performance of the appliance attached with.

View Complete Details

Grounding Kit

This product is used for mobile network and telecommunication equipment. Grounding kit is a coaxial cable accessory, protecting the coaxial cable system from the damaging effects of lightning, by offering a quick Return path to ground.It is recommended to provide Grounding kit on the RF feeder cable at the top and bottom of the Antenna tower and at the entrance of the transmitter / Receiver.

Features
  • Quick and easy installation
  • No loose part
  • No damage to feeder cable
  • Low Contact Resistance (
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us