Verified
Write a Review
Our Products
Dryers
2 Products availableSeparating Machines
2 Products availableStorage Tanks
2 Products availableHeat Exchangers
2 Products availableFilters
1 Products availableDomestic Fans, AC & Coolers
1 Products availableRotary Switches
1 Products availableOur Complete range of products are Crystallizer equipment and Dust Collection System Bag-House.
Rotary Dryers are used for drying wet powders, chemical, cakes, etc, which are easily breakable and dispersible. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.
| Agitators in simple terms are used for mixing or stirring of liquid/liquid or solid/liquid. Agitators with impellers of propeller, turbine, paddle, helical or anchor type configuration. Our agitators utilize commercially available components such as motors, couplings, reducers and shaft seals. |
| Some of our manufactured Agitators are installed at | ||||||
|
| Though called by different names (Evaporators/Pre-Heater/Condensers) for various applications but operating principle are almost similar. They are used for concentration or crystallization of liquids. In most of the cases they are used to increase the solid contents of the liquid product prior to drying. This is a cost effective method of removal of moisture. | ||||||
| Some of our manufactured Evaporators/Pre-Heater/Condensers are installed at | ||||||
| ||||||
| Crystallizer equipment is used for the evaporation and successive cooling/heating of the saturated solution to form solid i.e. in crystal form. Various type of crystallization equipments are used for the different product at different operating conditions | ||||||
| Types of Crystallizers: | ||||||
| ||||||
| Some of our manufactured Crystallizers are installed at | ||||||
|
As the name suggest, it is used as storage device. They are available in different shapes viz. elliptical, dished, flat or conical head as per the requirements of clients.
| Some of our manufactured Storage Tanks/ Vessels are installed at | ||||
|
| Avapor-liquid separatoris a vertical vessel used in several industrial applications to separate a vapor-liquid mixture. Gravity causes the liquid to settle to the bottom of the vessel, where it is withdrawn and the vapor moves upwards When used to remove suspended water droplets from streams of air, a vapor-liquid separator is often called a demister. | ||||
| Some of our manufactured VLS are installed at | ||||
|
| Duct Collection System is commonly known as bag-house. They are one of the most efficient and cost effective types of dust collectors available and can achieve a collection efficiency of more than 99% for very fine particulates.Dust-laden gases enter the bag-house and pass through fabric bags that act as filters. The bags can be of woven or felted cotton, synthetic, or glass-fiber material in either a tube or envelope shape. The high efficiency of these collectors is due to the dust cake formed on the surfaces of the bags. | ||||
| Some of our manufactured Dust Collection Systems are installed at | ||||
|
| The Flaking surface of the drum is duly ground and hard chromed with superior finish for fast and uniform formation of Flakes and prevention of dried material being stuck on the drum surface after scrapping. The drum is provided with a Hollow shaft for entry of Cooling medium. Rotary joint is provided on the hollow shaft at the Intel and Mist of Cooling medium. | ||||
| Some of our manufactured Flakers are installed at | ||||
|
| Nutsche Filter is a filtration technique used for waste water treatment. It is used because certain solvent evaporation causes safety and environmental hazards. Here filtration is carried under vacuum or pressure closed vessel, even solids can be discharged straightaway into drier. | ||||
| Some of our manufactured Nutsche Filters are installed at | ||||
|
Rotary Calciner is useful for providing indirect high temperature processing under oxidizing, reducing, or inert atmospheric conditions. Construction and working principle is similar to that of a Rotary Kiln Rotary Calciners provide a highly reliable and effective means of processing a wide variety of fine powders, granular materials, pellets and extrudates that require retention times ranging from a few minutes up to several hours, non-contact with products of combustion, special purge or reactant gases and bed temperature profiling.
| A spray dryer is a device which takes a liquid stream and separates the solute or suspension as a solid and the solvent into a vapour. The solid is usually collected in a cyclone. Spray dryers can dry a product very quickly compared to other methods of drying. They also turn a solution or slurry into a dried powder in a single step, which can be advantageous for profit maximization and process simplification. | ||||
| Some of our manufactured Spray Driers are installed at | ||||
|
We are the main supplier of this product.
| Achimneyis a structure for venting hot fuel gases or smoke from a boiler, furnace, processes or any other source generating gas that is supposed to be dispersed into the outside atmosphere. | ||||
| Some of our manufactured Chimneys are installed at | ||||
|
| Hoppers are basically temporary storage equipments. The bottom of the hopper typically has a mechanism to control the flow of materials, thus allowing them to be metered out at the desired rate. | ||||
| Some of our manufactured Hoppers are installed at | ||||
|
Hiren Patel (Shihisa Engineering P Ltd)
Mira Road - East, Mumbai, Maharashtra - 401104, India
Share us via
View Contact Number 
