Our Products
Food Additives
2 Products availableMasterbatches
2 Products availableOur offered Product range includes 28150 LG EVA Copolymer, Pilcure TMT, 1316 Hanwha EVA Copolymer, 430 Lotte EVA Copolymer and 2518 Sipchem EVA Copolymer.
Ethylene-vinyl acetate, also known as poly, is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene.
Performance
Storage and handling RecommendationsEthylene Vinyl Acetate Copolymers are available in free-flowing pelletized form designed for use in conventional polymer fabrication systems. Ethylene Vinyl Acetate Copolymer storage and handling of these product is extremely important for the products to remain flowable for transport and processing without pellet blocking.
Additional Information:
Payment Terms : T/T
Pilcure TMT as a primary accelerator and as a secondary accelerator in combination with sulfonamide / thiazoles, etc. is extensively used in NR, SBR, NR-SBR/BR blends, NBR, IIR, EPDM and other synthetic rubber based compounds for the manufacture of auto tyres and tubes, cycle tyres and tubes, conveyor / transmission beltings, retreading materials, footwear, hot air cured products and miscellaneous molded and extruded rubber products.
Pilflex 13 and its combinations with other antioxidants / antiozonants is used in the manufacture of Truck and Bus, OTR, LCV, Passenger Car, Motorcycle, Scooter, Industrial & Farm Tyres and Tubes, Bicycle Tyres & Tubes, Conveyor belts, V & Fan Belts, Power Transmission Belts, Cables, Hoses, Tubings and other miscellaneous Molded and Extruded rubber products based on NR, NR-BR, SBR, SBR-BR, NBR, IR, IIR, CR, EPDM, etc.
Pilnox TDQ is widely used in the manufacture of Truck & Bus, Passenger, OTR tyres, Two-three wheeler auto tyres, Cycle Tyres and Tubes, Retreading and Tyre Repair materials, conveyor beltings, V- belts and fan belts, transmission belts, tyre Flaps, Hoses, Cables, Oil seals, Gaskets, miscellaneous molded and extruded goods, Latex foam, Rice dehusking rollers, etc.
Acrolite Fast Violet KBLR Paint is a high tinctorial, reddish pigment with good light and weathering fastness. It is suitable for all types of paints, shading the greenish phthalocyanine blue pigment to the redder side and tinting white paints.
Si-69 is a kind of silane coupling agent with multiple functional groups successfully used in rubber industry to improve modulus and tensile strength of rubber, to reduce the compound viscosity and save process energy consumption.
Bis ( triethoxysilylpropyl ) tetra sulfide Crosile-69 has been widely used in the rubber industry.It is used to improve the reinforcing capability of fillers with silanol group on their surface, and also as an integral part of curing systems to improve cross linking network properties. It has cross linking and accelerator activity in rubber compounds as a silane coupling agent.
WACKER SILICONE HS emulsion is a water dilutable release agent having 20% dimethyl polysiloxane to-gether with non-fugitive, essentially non-ionic emulsi-fier. It is an effective and widely used release agent for rubber.
WACKER SILICONE HS provides following advan-tages over conventional dimethyl polysiloxane emulsions :
Storage and Shelf Life WACKER SILICONE HS must be used within one year from the date of manufacturing. To preserve all the properties of METROARK HS, the following condi-tions must be met -
Applications
Shining of rubber surface
As a Release Agent
Product SafetyWhen considering use of any Metroark product in a particular application, you should review our latest Material Safety Data Sheets and ensure that the use you intend can be accomplished safely. For Material Safety Data Sheets and other product safety informa-tion, contact Metroark Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.
Notes :
High strength silicone moldmaking rubber suited for the detailed reproduction of figures, art objects and similar items.
Features & Benefits
Applications - SILASTIC™ RTV-3483 Mould-Making Base and SILASTIC™ RTV-3083 Mould-Making Curing Agent is suited or the detailed reproduction of figures, art objects and similar items.
Complex plastic and polymer manufacturing use sodium bicarbonate as a purifier and catalyst. The breakdown of sodium bicarbonate releases carbon dioxide, which features prominently in the manufacturing of rubber and plastic
Precipitated Silica is used in Tyre industry to improve the tear resistance of truck and heavy equipment tyres and also to enhance adhesion between the metallic reinforcement and the rubber of radial tyres.
This information and our technical advice-whether verbal, in writing or by way of trials are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for he intended processes and uses.
The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sales and Delivery.
Precipitated Silica is used in Tyre industry to improve the tear resistance of truck and heavy equipment tyres and also to enhance adhesion between the metallic reinforcement and the rubber of radial tyres.
Uses and Benefits
Ethylene-vinyl acetate, also known as poly, is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene.
Ethylene-vinyl acetate, also known as poly, is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene.
Ethylene-vinyl acetate, also known as poly, is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene.
Ethylene-vinyl acetate, also known as poly, is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene.
<p>Ethylene-vinyl acetate, also known as poly, is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene.</p> <p> </p> <p><strong>Performance</strong></p> <ul> <li>Uniform VA Contents and MI</li> <li>Excellent compatibility with other raw material of HMA</li> <li>Good organoleptic property</li> </ul> <p> </p> <p><strong>Storage and handling Recommendations</strong><br />Ethylene Vinyl Acetate Copolymers are available in free-flowing pelletized form designed for use in conventional polymer fabrication systems. Ethylene Vinyl Acetate Copolymer storage and handling of these product is extremely important for the products to remain flowable for transport and processing without pellet blocking.</p> <ul> <li>To prevent pellet blocking</li> <li>To minimize static load, do not double stack pallets.</li> <li>Keeping storage and handling temperature between 10 25°C.</li> <li>Store the resins in the warehouse to protect from exposure to elevated temperature which is not to exceed 35°C.</li> <li>Consume the resins on a first in, first out basis.</li> </ul>
Additional Information:
Payment Terms : T/T
EVATANE® 42-60 is a soft, flexible ethylene vinyl acetate (EVA) random copolymer grade made by high pressure radicalar polymerization process. Possesses high VA content, high solubility and good polarity. It is soluble in aromatic solvents such as toluene up to 35%, benzene up to 25% at room temperature & partially soluble up to 15% in MEK, MIBK & DIBK and insoluble in alcohols. EVATANE® 42-60 is recommended for inks or solvent-base adhesive formulations.
Additional Information:
Payment Terms : T/T
Packaging Details : 25Kg Bag
Delivery Time : +1 Day
An infrared thermometer is a thermometer which infers temperature from a portion of the thermal radiation sometimes called black-body radiation emitted by the object being measured.
Additional Information:
Payment Terms : T/T
Packaging Details : 1X1 Piece in Box (excludes battery)
Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene. It was the first grade of polyethylene, produced in 1933 by Imperial Chemical Industries (ICI) using a high pressure process via free radical polymerization. Its manufacture employs the same method today.
Handling : Consult material safety data sheet (MSDS) for additional handling information for Zincolet–RN 44.
Uses and Benefits
Uses and Benefits
Uses and Benefits
Advantages
Improves flow of compound in transfer, compression and injection moulding. Gives good mould flow and improves viscosity. Prevents sticking of compounds to mill rolls.
Uses and Benefits
Recommended for - NR, SBR, EPDM, EVA, As well as thermoplastic Elastomers.