Shenzhen Farctrl Technology Co. Ltd.

Shenzhen, Guangdong, China

We are offering ring type mobile phone display anti-theft device. Basic specification size 4cm*1cm*1cm material abs operating voltage 3v bi tone output 885db at 1 ft stand-by current consumption 1.0ua (typical) activation current consumption 28ma (typical) alarm modes sound and light alarm stand-by battery life over 1 year tone bi tone host size 4cm * 1.5cm * 1.5cm cord length about 50cm before tensile, tensile maximum length 150cm wire diameter 0.2cm color black/white featuresthe sound and light alarm, high-decibel alarm sound to deter thieves. Independent built-in power supply, no external power cord. Easy to install, simple to operate, one minute can be installed into defence state. Paste head 3m adhesive paper will not be in the product surface residualtraces of nasty glue. Alarms is not disturb by neighboring electric waves and other signalinterference for anti-shoplifting purposes - the simplest, most convenient devices for protecting the goods on display. one side with an alarm and tamper switch; the other side with tamper switch only.

We are offering security and protection 8 ports mobile accessories display device, security & protection 8 ports mobile accessories display device: supply multiple interfaces alarm display holders for mobile basic specification operating voltage 912vdc stand-by current consumption 10.0ma activation current consumption 250ma bi tone output 120 db (inner alarm), optional: external alarm or speaker induction method contact separation alarm, disconnection alarm, usb jack separation alarm multi targets mx-364 (4 targets), mx-366 (6 targets) , mx-368 (8 targets) 3 different display selectable a.metal display frame with usb demo-sensor b.acrylic display frame with usb demo-sensor c.usb demo-sensor alone package included: 1.fc165c(remote control smart alarm). 2.fc165u(usb mini end cable, length 6 feet). 3.sm-0222 (universal adaptor 12vdc 1, 000ma). 4.fc165r (remote control) optional. 5.fc165pmd(smart phone metal display) optional. 6.fc165cmd (camera metal display) optional. 7.fc165tad(tablet acrylic display) optional. function: 1.a disconnect alarm function: two contacts separated alarm, disconnect alarm, usb jack, unplug the alarm. 2.fortification solution and defense: auto fortification; solution of anti-manually or remote control anti-solution. 3.remote control: wireless remote disarm. features: 1.quick reaction speed, pull or cut the usb cable, the alarm warning. 2.with self-test function design, the factory settings to default the port is turned off, the alarm power usb port to connect the device host to detect the port, and take the initiative to close the idle port (idle port will automatically turn off, not man-made blockage), access device port detected automatically in the security state3.once the alarm has been triggered, restitution ca not disarm, the alarm must be reset by host key to disarm the alarm (press remote control red key 2 seconds to relief). With very higher safety factor, it can protect customers property. 4.built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host, so you can avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line, greatly improving security. (if necessary, user can add an external speaker on the wall or easy to hear the alarm sound, the external speaker jack plug into the rear side host). 5.with remote function, easy to use (can order extra remote controller, if necessary). 6.led light display each port current status. 7.usb interface, ring type, mini end selectable, the cable length can be requested. 8.wide range application: digital store, electronics stores or exhibition in notebook, tablet pc, cameras, smart phone, mp3, mp4 and the gps and other exhibits anti-theft and reusable. operating step: 1.connect one end of the cable to the alarm (usb port), the other end connected to the object. 2.the adaptor jack plug into the alarm (on rear side). 3.the power supply plug into ac outlet, the alarm horn chirping sound, the power is on, the alarm panel turn on indicator led corresponding port, the host is already in the security state (in active position). 4.press red key on remote control to relief alarm, the alarm panel led turns off. 5.if the installation of equipment to port which way the light does not illuminate, indicating which way is not connected, reconnect until the led lights on. 6.when the anti-theft device was break, or off line, the host immediately chirping alarm, while the corresponding port indicator light flashes, the staff on duty should be checked in the equipment of the ports and pay attention to whether there is "theft" by. Need to disarm the alarm status; you can press the reset button (or remote button) to lift alarm. caution: 1.the host of the alarm should be placed in a more hidden and usually do not often encounter while on the other articles below, to avoid the alarm sound to be concealed. 2.open daily alarm and be sure to check the connection is connected, just open for the proposed increase in security should be reset once to do self-inspection, self-test and observe the corresponding port light is lit.

We are offering 10 ports mobile/camera/ipad/tablet/mp3/mp5 security holder controller. basic specification size 16cm*10cm*3cm material abs operating voltage 912vdc stand-by current consumption 10.0ma activation current consumption 250ma bi tone output 120 db (inner alarm), optional: external alarm or speaker induction method contact separation alarm, disconnection alarm, usb jack separation alarm multi targets mx-364 (4 targets), mx-366 (6 targets) , mx-368 (8 targets) 3 different display selectable a.metal display frame with usb demo-sensor b.acrylic display frame with usb demo-sensor c.usb demo-sensor alone 10 ports mobile/camera/ipad/tablet/mp3/mp5 security holder controller package included: 1.fc165d(remote control smart alarm). 2.fc165u(usb mini end cable, length 6 feet). 3.sm-0222 (universal adaptor 12vdc 1, 000ma). 4.fc165r (remote control) optional. 5.fc165pmd(smart phone metal display) optional. 6.fc165cmd (camera metal display) optional. 7.fc165tad(tablet acrylic display) optional. function: 1.a disconnect alarm function: two contacts separated alarm, disconnect alarm, usb jack, unplug the alarm. 2.fortification solution and defense: auto fortification; solution of anti-manually or remote control anti-solution. 3.remote control: wireless remote disarm. features: 1.quick reaction speed, pull or cut the usb cable, the alarm warning. 2.with self-test function design, the factory settings to default the port is turned off, the alarm power usb port to connect the device host to detect the port, and take the initiative to close the idle port (idle port will automatically turn off, not man-made blockage), access device port detected automatically in the security state3.once the alarm has been triggered, restitution ca not disarm, the alarm must be reset by host key to disarm the alarm (press remote control red key 2 seconds to relief). With very higher safety factor, it can protect customers property. 4.built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host, so you can avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line, greatly improving security. (if necessary, user can add an external speaker on the wall or easy to hear the alarm sound, the external speaker jack plug into the rear side host). 5.with remote function, easy to use (can order extra remote controller, if necessary). 6.led light display each port current status. 7.usb interface, ring type, mini end selectable, the cable length can be requested. 8.wide range application: digital store, electronics stores or exhibition in notebook, tablet pc, cameras, smart phone, mp3, mp4 and the gps and other exhibits anti-theft and reusable. caution: 1.the host of the alarm should be placed in a more hidden and usually do not often encounter while on the other articles below, to avoid the alarm sound to be concealed. 2.open daily alarm and be sure to check the connection is connected, just open for the proposed increase in security should be reset once to do self-inspection, self-test and observe the corresponding port light is lit.

We are offering mini & simplest anti-theft alarm of counter exhibits samples. basic specificationoperating voltage 3v bi tone output 885db at 1 ft stand-by current consumption 1.0ua (typical) activation current consumption 28ma (typical) alarm modes sound and light alarm stand-by battery life over 1 year tone bi tone host size 4cm * 1.5cm * 1.5cm cord length about 50cm before tensile, tensile maximum length 150cm wire diameter 0.2cm color black/white features: independent built-in power supply, no external power cord. traces of nasty glue. alarms is not disturb by neighboring electric waves and other signalinterference for anti-shoplifting purposes - the simplest, most convenient devices for protecting the goods on display. one side with an alarm and tamper switch; the other side with tamper switch only. the sound and light alarm, high-decibel alarm sound to deter thieves. easy to install, simple to operate, one minute can be installed into defence state. paste head 3m adhesive paper will not be in the product surface residual

We are offering phone secure anti theft device. Size 16cm*10cm*3cm material abs operating voltage 912vdc stand-by current consumption 10.0ma activation current consumption 250ma bi tone output 120 db (inner alarm), optional: external alarm or speaker induction method contact separation alarm, disconnection alarm, usb jack separation alarm multi targets mx-364 (4 targets), mx-366 (6 targets) , mx-368 (8 targets) 3 different display selectable a.metal display frame with usb demo-sensor b.acrylic display frame with usb demo-sensor c.usb demo-sensor alone package included: 1.fc165a (remote control smart alarm). 2.fc165u(usb mini end cable, length 6 feet). 3.sm-0222 (universal adaptor 12vdc 1, 000ma). 4.fc165 r (remote control) optional. 5.fc165pmd(smart phone metal display) optional. 6.fc165cmd (camera metal display) optional. 7.fc165tad(tablet acrylic display) optional. function: 1.a disconnect alarm function: two contacts separated alarm, disconnect alarm, usb jack, unplug the alarm. 2.fortification solution and defense: auto fortification; solution of anti-manually or remote control anti-solution. 3.remote control: wireless remote disarm. features: 1.quick reaction speed, pull or cut the usb cable, the alarm warning. 2.with self-test function design, the factory settings to default the port is turned off, the alarm power usb port to connect the device host to detect the port, and take the initiative to close the idle port (idle port will automatically turn off, not man-made blockage), access device port detected automatically in the security state3.once the alarm has been triggered, restitution ca not disarm, the alarm must be reset by host key to disarm the alarm (press remote control red key 2 seconds to relief). With very higher safety factor, it can protect customers property. 4.built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host, so you can avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line, greatly improving security. (if necessary, user can add an external speaker on the wall or easy to hear the alarm sound, the external speaker jack plug into the rear side host). 5.with remote function, easy to use (can order extra remote controller, if necessary). 6.led light display each port current status. 7.usb interface, ring type, mini end selectable, the cable length can be requested. 8.wide range application: digital store, electronics stores or exhibition in notebook, tablet pc, cameras, smart phone, mp3, mp4 and the gps and other exhibits anti-theft and reusable. operating step: 1.connect one end of the cable to the alarm (usb port), the other end connected to the object. 2.the adaptor jack plug into the alarm (on rear side). 3.the power supply plug into ac outlet, the alarm horn chirping sound, the power is on, the alarm panel turn on indicator led corresponding port, the host is already in the security state (in active position). 4.press red key on remote control to relief alarm, the alarm panel led turns off. 5.if the installation of equipment to port which way the light does not illuminate, indicating which way is not connected, reconnect until the led lights on. 6.when the anti-theft device was break, or off line, the host immediately chirping alarm, while the corresponding port indicator light flashes, the staff on duty should be checked in the equipment of the ports and pay attention to whether there is "theft" by. Need to disarm the alarm status; you can press the reset button (or remote button) to lift alarm. caution: 1.the host of the alarm should be placed in a more hidden and usually do not often encounter while on the other articles below, to avoid the alarm sound to be concealed. 2.open daily alarm and be sure to check the connection is connected, just open for the proposed increase in security should be reset once to do self-inspection, self-test and observe the corresponding port light is lit.

We are offering noble plastic paper display holder. Feature list: anti-shoplifting display stand for cell phone 1) anti-shoplifting display stand for cell phone is convenient for the customers to see the phone, camera, mp5, psp when display device was used in mobile phone exhibition hall, exclusive shops, etc. material/color: material:abs color option:white mobile phone standmobile phone security product packing 1).nw/pc :160g 2).gw/pc:330g 3).nw/ctn: 5.3kg 4).gw/ctn :6.1kg 1)the anti-shoplifting display stand for cell phone without alarm is fixed on the exhibition counter with 3m paper. 2) the phone installation: remove the adhesive tap, paste the phone. Finally paste the small touch. port: we can also make it according to customer's requirement trade information: modelmoq payment delivery packing production capability price fc159b100 pcs t/t /l/c3-5 days after paymentwell-packed export cartoon30000 pcs/month please contact

We are offering eas alarm system . Features:1.quick reaction speed, pull or cut the usb cable, the alarm warning. Once the alarm has been triggered, restitution cannot disarm, the alarm must be reset by remote control off key to disarm (press remote control off key to relief). 2. With high safety factor, it can protect customers property. 3.built-in alarm horn, high-volume alarm on the bottom, can avoid destruction of the thief. 4.with remote control function, easy to use. 5.led light display current status. 6.wide range application: retail chain store or exhibition center for tablet pc, camera, smart phone, gps and other exhibits anti-theft and reusable . alarm funtion: 1.break or short circuit resistacne, it will alarm 2.pry and cut spring wire , it will alarm 3.remove the sensor, it will alarm 4.pull out the connector , it will alarm.