• Integrated Compact unit.
• Totally mounted on common base frames.
• The waste water coming out of the waste heat boiler is treated and reused in the cooling tower as make up water.
• No shut down required for the installation.
• Treatment based on physiochemical method.
• Very valuable for water scarcity locations.
• Less pollution problem.
• Sharpenn offers packaged exclusive water recycling system for solvent extraction plant.

Sharpenn offers packaged sewage treatment plant (STP) for small establishments, small communities, housing colonies and societies.

• Compact unit
• Easy to install
• Treatment based on biological process followed by filtration.
• The treated water can be reused for plantation and cultivation.
• Easy to manage and maintain.

Sharpenn also offers conventional sewage treatment plants for various capacities and for different discharge options. Water Recycling Plant for all plants, port and others. ETP Plants WITH ZERO LIQUID DISCHARGE at economical operating cost. Return of investment in two years.

Sharpenn offers complete Industrial Waste Water Treatment Solutions based on Dissolved Air Floatation (DAF) technique for Primary Treatment followed by secondary and tertiary treatment to meet the stringent parameters. Also MBBR and MBR are offered for advanced treatment in place of conventional treatment systems. Advantages of Dissolved Air Floatation (DAF) Technique compared to Conventional Treatment System.

• Very fast Protein, Fats & Oils Separation.
• Byproduct recovery.
• High BOD and Suspended Solids removal.
• High sludge concentration.
• Fast sludge separation.
• High Dissolved Oxygen Enrichment.
• Low space requirement.
• Adaptability.
• Recycling Facility.
• Simple handling.

this is a high-speed industrial centrifuge filter that is primarily used for separating two liquids and is a culmination of the latest technology with perfect designing.

Standard Material
TheHigh Speed Centrifuge Filterhas a prominent frame and a high-speed tubular bowl of CS/SS 304/SS 316 and is made of centrifugal casting.

A slow acceleration special motor and starter operates this machine. The slurry is fed through the bottom of the bowl and the separation takes place inside the bowl by centrifugal force created by high speed. It creates separate circle of layers and comes out continuously through the bowl top and further separate discharges through covers.

The Rotary Drum Flaker consists of a cylindrical drum, having provision for cooling drum surface. One end of the drum shaft is connected to a gear box which is driven by a motor. The heating cooling media will be circulated in drum during operations, the drum rotates at a slow speed. A thin layer of the product to be dried cooled, adheres to the outside of the rotating, drum and internally cooled drum. The product gets solidified and is after an almost complete rotation, scrapped off drum surface and at the same instant granulated in the form of flakes, falls on screw conveyor. At the bottom of conveyor, filling point is provided to fill the bag. The entire process is continuous operation, does not require manpower except bag filling. Pneumatic hydraulic operation of scraper assemblies can be provided.

Micro Bag filteris certainly the choice of millions of buyers from all across the globe for its phenomenal benefits.

Themicro bag filteris equipped with open & close lid, eye bolts, devit and devit arm. During cake discharge, open the lid, clean filter bags and dislodge the cake. The liquid filter bags are supported by stainless steel perforated baskets.

Standard Material
This verticalmicro bag filtervessel in CS/ SS 304/ SS 316 comes with flange lock closure and standard seal in Neoprene/ Vitron/ Nitrile.

Available Range
0.15 sq. meter to 7 sq. meter

The Rotary Drum Flaker consists of a cylindrical drum, having provision for cooling drum surface. One end of the drum shaft is connected to a gear box which is driven by a motor. The heating cooling media will be circulated in drum during operations, the drum rotates at a slow speed. A thin layer of the product to be dried / cooled, adheres to the outside of the rotating, drum and internally cooled drum. The product gets solidified and is after an almost complete rotation, scrapped off drum surface and at the same instant granulated in the form of flakes, falls on screw conveyor. At the bottom of conveyor, filling point is provided to fill the bag. The entire process is continuous operation, does not require manpower except bag filling. Pneumatic / hydraulic operation of scraper assemblies can be provided.

• Integrated Compact unit.
• Totally mounted on common base frames.
• The waste water coming out of the waste heat boiler is treated and reused in the cooling tower as make up water.
• No shut down required for the installation.
• Treatment based on physiochemical method.
• Very valuable for water scarcity locations.
• Less pollution problem.
• Sharpenn offers packaged exclusive water recycling system for solvent extraction plant.

Sharpenn offers packaged sewage treatment plant (STP) for small establishments, small communities, housing colonies and societies.

• Compact unit
• Easy to install
• Treatment based on biological process followed by filtration.
• The treated water can be reused for plantation and cultivation.
• Easy to manage and maintain.

Sharpenn also offers conventional sewage treatment plants for various capacities and for different discharge options. Water Recycling Plant for all plants, port and others. ETP Plants WITH ZERO LIQUID DISCHARGE at economical operating cost. Return of investment in two years.

Sharpenn offers complete Industrial Waste Water Treatment Solutions based on Dissolved Air Floatation (DAF) technique for Primary Treatment followed by secondary and tertiary treatment to meet the stringent parameters. Also MBBR and MBR are offered for advanced treatment in place of conventional treatment systems. Advantages of Dissolved Air Floatation (DAF) Technique compared to Conventional Treatment System.

• Very fast Protein, Fats & Oils Separation.
• Byproduct recovery.
• High BOD and Suspended Solids removal.
• High sludge concentration.
• Fast sludge separation.
• High Dissolved Oxygen Enrichment.
• Low space requirement.
• Adaptability.
• Recycling Facility.
• Simple handling.

this is a high-speed industrial centrifuge filter that is primarily used for separating two liquids and is a culmination of the latest technology with perfect designing.

Standard Material
TheHigh Speed Centrifuge Filterhas a prominent frame and a high-speed tubular bowl of CS/SS 304/SS 316 and is made of centrifugal casting.

A slow acceleration special motor and starter operates this machine. The slurry is fed through the bottom of the bowl and the separation takes place inside the bowl by centrifugal force created by high speed. It creates separate circle of layers and comes out continuously through the bowl top and further separate discharges through covers.

The Rotary Drum Flaker consists of a cylindrical drum, having provision for cooling drum surface. One end of the drum shaft is connected to a gear box which is driven by a motor. The heating cooling media will be circulated in drum during operations, the drum rotates at a slow speed. A thin layer of the product to be dried cooled, adheres to the outside of the rotating, drum and internally cooled drum. The product gets solidified and is after an almost complete rotation, scrapped off drum surface and at the same instant granulated in the form of flakes, falls on screw conveyor. At the bottom of conveyor, filling point is provided to fill the bag. The entire process is continuous operation, does not require manpower except bag filling. Pneumatic hydraulic operation of scraper assemblies can be provided.

Micro Bag filteris certainly the choice of millions of buyers from all across the globe for its phenomenal benefits.

Themicro bag filteris equipped with open & close lid, eye bolts, devit and devit arm. During cake discharge, open the lid, clean filter bags and dislodge the cake. The liquid filter bags are supported by stainless steel perforated baskets.

Standard Material
This verticalmicro bag filtervessel in CS/ SS 304/ SS 316 comes with flange lock closure and standard seal in Neoprene/ Vitron/ Nitrile.

Available Range
0.15 sq. meter to 7 sq. meter

The Rotary Drum Flaker consists of a cylindrical drum, having provision for cooling drum surface. One end of the drum shaft is connected to a gear box which is driven by a motor. The heating cooling media will be circulated in drum during operations, the drum rotates at a slow speed. A thin layer of the product to be dried / cooled, adheres to the outside of the rotating, drum and internally cooled drum. The product gets solidified and is after an almost complete rotation, scrapped off drum surface and at the same instant granulated in the form of flakes, falls on screw conveyor. At the bottom of conveyor, filling point is provided to fill the bag. The entire process is continuous operation, does not require manpower except bag filling. Pneumatic / hydraulic operation of scraper assemblies can be provided.