Woodworking Tools And Machines

We are leaders in the market for providing best range of LOG DEBARKER MACHINE, Plywood Dipping Machine, plywood machinery, plywood policing machine and Seasoning Chamber

LOG DEBARKER MACHINE

Model no. SEC-LDM 108″(2750mm)
Branded Power Motors 3 no. 20 hp, 15 hp, 5 hp for power pack
No. of rollers 3 EN Material
Rollers length 116″(2950mm)
Rollers diameter 230mm
Maximum Working diameter 15″(380mm)
Minimum working diameter 3″(76mm)
Over all dimensions 3800mm x 2440mm x 1220mm

Log Debarker Machineare widely used in the all types of plywood (panel), veneer making and woodworking industries for log bark discharger, wood discharger. This machine is hydraulically operated and can work continuously in whole process. In conventional method log bark used to discharge by man power result low production and costly, so for prevent this problem we discovered a new technology machine for discharge (remove) bark of wood log. This is the new generation wood debarking machine, this machine method is very better as compare to conventional method.

We are manufacturing this machine with the use of discovered engineered technology of internationalstandard level to increasing your production capacity at smaller time without any man power. Productions about this machine much more, rapidly, no wearing tearing, less expensive & working without any men power. This machine simple in working and is fitted with leading quality 3 rollers made from EN 8 materials. We have manufacturing this machine on the scientific way with leading services and technical support forever.

We have manufacturing this Debarking machine in two models; SEC-LDM 56 (1400mm), SEC-LDM 108 (2750mm) and other also can design according to our customers requirement such as working length & working diameter etc

LOG DEBARKER MACHINE : MODEL NO. SEC-LDM 56(1400mm) MACHINES FEATURES:-

Heavy duty m.s. fabricated body
Easy to operate and used friendly
Low vibration and noise
Low maintenance
Low failure rate
Leading quality
Leading services
Reducing labor & labor cost
Increasing production
Market competitive price

TECHNICAL SPECIFICATIONS:

Model no. SEC-LDM 56(1400mm)
Body and Base Frame of the Machine heavy duty M.S. sheet
Branded Power Motors : 3 no. 10 hp, 7.5 hp, 5 hp for power pack
No. of rollers : 3 EN Material
Rollers length : 60(1525mm)
Rollers diameter : 150mm
Maximum Working diameter : 15(380mm)
Minimum working diameter : 3(76mm)
Leading quality operating panel
Over all dimensions : 2286mm x 2286mm x 915mm

LOG DEBARKER MACHINE : MODEL NO. SEC-LDM 108(2750mm) MACHINES FEATURES:-

Heavy duty m.s. fabricated body
Easy to operate and used friendly
Low vibration and noise
Low maintenance
Low failure rate
Leading quality
Leading services
Reducing labor & labor cost
Increasing production
Market competitive price

View Complete Details

Ask Latest Price & Details

Plywood Dipping Machine

Gear box heavy duty 2 no. 3″ center
Branded Power Motors 2 no. 3 hp
No. of Rubber rollers 12
Knife stock length 2750mm
Maximum log length 2750mm
Maximum log diameter 1300mm
Minimum end core diameter 70mm
Spindle diameter 130mm
Maximum spindle rpm 125
Veneer thickness 0.25mm – 3.70mm

Dipping Machine for plywoodare widely used in the all types of plywood (panel), block board and woodworking industries for chemical coating on plywood, flush-door, skin-door ply, board (panel) through rubber rollers. This machine is also known as plywood policing machine. In conventional method generally chemical coating on plywood, doors & block boards with the use of brush or cloth, in this method there are slow production and lining of different shades on plywood, doors & boards always seen. This is the new generation chemical coating/ policing machine, this machine coating method is much better than the conventional method.

We are manufacturing this machine with the use of discovered engineered technology of international standard level for increasing your chemical utilization, perfectly spreading and coating, minimum chemical consumption and prevent wastages. Evenly this machine helps the plywood coating rigidly precise, because we are using leading quality rubber rollers. This machine simple in working and machine is fitted with 10 to 12 rubber rollers. Rubber rollers are fitted with double ball bearing brackets.

We have manufacturing this machine on the scientific way with leading services and technical support.

We have manufacturing this Dipping machine in three models; SEC-CDM 12 Rubber rollers, SEC-CDM 12 Rubber Rollers fully automatic, SEC-CDM 12 Rubber Rollers semi-automatic and other according to our customers requirement.

WORKING OF MACHINE:- This Dipping machine works through Neoprene Rubber rollers, Heavy duty gear box and pump, Temperature meter, Heavy duty chemical tank, Heavy gauge, Remote control board, Electrical starter or panel and also whipper.

MACHINES FEATURES:

Heavy duty m.s. fabricated frame and body
Easy to operate and used friendly
Smoothly running
Vibration less
Much chemical saving
Low maintenance
Leading quality
Leading services
Reducing labor & labor cost
Increasing production
Market competitive price

TECHNICAL SPECIFICATIONS:

Body and Base Frame of Machine heavy duty M.S. sheet
Chemical tank heavy duty M.S. sheet
Gear box heavy duty : 2 no. 3 center
Branded Power Motors : 2 no. 3 hp
No. of Rubber rollers : 12
Fitter are fitted in machine for filter the chemical
Steam coil : One no. steam coil for heating chemical
One number 1 hp Pump for chemical lift from tank to on rollers
Guiders are both sides fitted for straight movement of plywood, flush-door, ply, board (panel)

View Complete Details

Ask Latest Price & Details

Plywood Machinery

Buyers can approach us for acquiring top-of-the-line quality plywood machinery at coffer-friendly prices! We have garnered wide acclaim for bringing forth cost-effective product range that is available at Haryana(India).

View Complete Details

Ask Latest Price & Details