Svm Agro Processor Nagpur, Maharashtra

Biodiesel is a renewable fuel substitute that can be made by chemically combining any natural oil or fat with an alcohol such as methanol or ethanol. Biodiesel can be made after transesterification from virgin or used vegetable oils (both edible and non-edible). Biodiesel is biodegradable, nontoxic, and essentially free of sulfur and aromatics. It is a renewable resource, based on jatropha and other oil crops. click here for more details biodiesel as a fuel biodiesel can be used in place of petroleum diesel fuel for vehicles or heating oil for buildings. Unlike petroleum diesel, biodiesel is a renewable resource, and it creates less pollution than petroleum diesel. It can be used alone or in combination with petroleum diesel, or with heating oil. Generally, no expensive modifications to the engines are required. This makes it easier to integrate biodiesel into current systems than other alternative energy sources, which often require new equipment. features 75% cleaner than conventional diesel fuel reduces unburned hydrocarbons, carbon monoxide and particulate matter in exhaust fumes contains no sulphur emissions are nearly 5upercentage less than conventional diesel fuel doesn't cause eye irritation vlore biodegradable than sugar and less toxic than table salt fuel economy is the same as conventional diesel fuel much better lubricant than conventional diesel fuel and extends engine life high cetane rating, which improves engine performance 1% biodiesel will increase iubricity by 65% biodiesel can be produced from any fat or vegetable oil, including waste cooking oil how is biodiesel is made? biodiesel fuel is made from oils or fats, which are both hydrocarbons. These hydrocarbons are filtered and then mixed with an alcohol, which is usually methanol, and a catalyst (sodium or potassium hydroxide). The major products of this reaction are the biodiesel fuel, which is an ester, and glycerol, which has commercial uses, such as in cosmetics. strength biodiesel fuel is a renewable energy source that can be made from tbo's i.e. Tree born oil seeds or from cooking oils recycled from restaurants. This means it is a renewable resource unlike petroleum-based diesel. biodiesel is less polluting than petroleum diesel. Compared to petroleum diesel, biodiesel produces less soot (particulate matter), carbon monoxide, unburned hydrocarbons, and sulfur dioxide. the absence of sulfur in 100% biodiesel should extend the life of catalytic converters. Biodiesel fuel can also be used in combination with heating oil to heat residential and industrial buildings. This can reduce dependence on non-renewable and increasingly expensive heating oil. Biodiesel fuel can generally be used in existing oil heating systems and diesel engines without modification, and it can be distributed through existing diesel fuel pumps. This is an advantage over other alternative fuels, which can be expensive to use initially due to high cost of equipment modifications or new purchases. Biodiesel provides almost the same energy per gallon as petroleum diesel. The lubricating effects of the biodiesel will extend the lifetime of engines. biodiesel can also fetch many rewards in terms of carbon credits under " kyoto protocol" up to 21 years .an agency like ernest & young can do the necessary registration for this. Theoretically, 1 ltr of biodiesel can replace around 0.9 ltr of diesel and thus, will help in emission reduction of around 2.4 kg c02 equivalent.

• MOQ 250 Gallon

We are offering Fatty Acid Methyl Ester, Biodiesel. the product is derived from vegetable oil and can be used as fuel additive and many application relatated to lubricants.

We are offering edible oil refining plant. Svm agro processor is a leading manufacturer, exporter & supplier of edible oil refining plant. The edible oil refining plant is a unique industrial equipment, which is highly efficient in refining edible oil. The edible oil refining plant has a robust construction and employs a number of processes. The processes have been explained in detail below : process continuous neutralizing process the shortmix plant is built up as an entirely closed system and is designed to handle vegetable oils in thefollowing operations: degumming water degumming gum conditioning with concentrated phosphoric acid water washingvacuum dryingthe above mentioned operations form stages of continuous degumming and alkali refining process and the dry neutralized oil is obtained continuously from the plant. gum conditioning stage the degummed oil from intermediate storage tank is heated to the required temperature for refining by heat exchanger and pumped to gum conditioning mixer, where oil is mixed with required quantity of concentrated phosphoric acid, pumped into the mixer by a metering pump. The oil is allowed to hold in gum conditioning mixer where precipitation of phosphatides and metal compounds takes place and then fed to neutralization mixer. water degumming crude oil is pumped in a continuous and constant stream by pump heated to required temperature in k, the plate heat exchanger mixed with pre-calculated quantity of water in an inline mixer and fed to a precipitation tank. Oil-water mixture is allowed sufficient residence time in the precipitation tank for the gums to agglomerate on hydration and then pumped to separator si where the oil and hydrated gums are separated and pumped to storage, disposal, or gum drying plant in case of soybean gums and degummed oil is stored in degummed oil tank. water washing stage hot water is mixed with the neutral oil from s2 in water washing mixer and this water, enriched with residual soap is removed from oil in the oil below 70 ppm. vaccum drying process washed oil is fed continuously by vacuum pump to the vacuum dryer and sprayed through specially designed nozzles. The vacuum dryer is kept under a vacuum of 70 torr. The dried oil from the vacuum chamber is continuously drawn and pumped by pump to intermediate storage tank. bleaching process the incoming oil enters the oil heater where oil is heated to the bleaching temperature. Bleaching chemicals are proportioned into the bleacher by automatically working dosing unit. The bleacher operates under vacuum of 700 mm hg or absolute pressure 70 mm of hg. The bleacher vessel is equipped with an agitator in each compartment to maintain good mixing of bleaching chemicals and oil. After bleaching, the slurry of hot oil and bleaching earth is transferred to the filter section for removing bleaching chemicals. continuous deodorizing process the preheated oil is filtered in filters and then pumped in to the deaeratorvessel (ak 801) where it is deaerated. After deaearation the oil is continuously heated in regenerative heat exchanger (e802) utilising hot oil from the deodouriser. The final deodourising temperature is achieved in a shell and tube heat exchanger by thermal oil, which is circulated through an automatically working heating unit. next the oil enters the packed column deodouriser (ak802) where it flows continuously through the packing in the stripping section of the column. The specially designed distributor ensures uniform distribution of the hot oil over the entire packing area. As the oil flows down it meets the upward flow of steam which strips away the volatile material from the oil at the given temperature, and system pressure. the packing provides sufficient mass transfer surface for effective removal of volatile material. The oil trickling down at the bottom of the stripping section is collected. Flow control system at the outlet of the deodorizer ensures maintenance of required level in the bottom of the stripping section. The steam used for "stripping off" volatile matters in the oil is distributed evenly and intensively by separate spargers installed between two baffles. The steam meets the deodorizer oil stripped of all volatile matter and rises through the stripping section, stripping off the volatile matter from the oil. the countercurrent flow of steam and oil in this manner across specially designed packing ensures lower steam consumption than conventional deodorisers. The deodouriser oil leaving the deodouriser is immediately cooled by the regenerative heat exchanger (ak803) , and then further cooled in a shell and tube heat exchanger (ak804) finally the oil is passed through two alternatively working polish filters (f 803 & f 804) before cooling in plate heat exchanger ak 805 and sending to storage.

Sharonex biodiesel is dedicatedly engaged in the manufacturing and supplying of high quality biodiesel fuels. Biodiesel alternative fuels are renewable fuel substitute that are made by chemically combining any natural oil or fat with an alcohol such as methanol or ethanol. The pure biodiesel fuels made available by us are used as alternative to petroleum fuels in generators, earth moving equipments, trucks, buses and other vehicles. The uses of biodiesels increase the efficiency of the machines. Our biodiesel fuels are 75% percent cleaner than the conventional diesel fuel and they are cost effective as well. In addition to this, we are identified as one of the reputed biodiesel fuels manufacturers and suppliers in india.

Solvent extraction is a process of diffusion of solvent into the oil bearing cells of the raw material, resulting in a solution of the oil in the solvent." Hexane" is chosen to be appropriate and the best for the use considering its viability with reference to commercial economics, edibility of various products being obtained after extraction, characteristic mainly its low boiling point and other factors. The entire process is largely divided into three main sections as follows : Preparatory Section Main Extfiaction Section Meal Bagging Section The main extraction section is again divided into following subsections Extraction of oil from prepared raw materials, Desolventisation Distillation to recover oil from solvent Condensation Final solvent recovery section The finishing section includes conveying, cooling and bagging PREPARATORY SECTION An efficient extraction would need that every oil-bearing cell of the material is in contact with solvent. In other words, the smooth preparation prior to main extraction is very vital to comply with this contact. Smaller the material size, better the penetration of the solvent into the oil bearing cells, but too fine a size will prevent the solvent from percolating through the mass. Hence an optimum size is absolutely essential for efficient extraction. The method of material preparation does vary from material depending upon its oil content and physical properties. we group them as follows: Oil cakes High OiI Content Material Floury material In the case of oil cakes, being big pieces, have to be reduced to proper size and without fail, ensuring that there are no 'fines'. Cake sizer and cake crackers are the finest to this process. In the case of high oil content seeds like sunflower, mustard, rapeseed, safflower etc. for a good extraction, it passes through the well proven expander after flaking with a squeezomatic arrangement where part of oil will be squeezed in the preparatory and balance collets will o to the plant through the latest updated drier cooler. you will find here cake cracker, cooker, flaker, expander with squeezomatic arrangement, drier cooler. In case of floury material like rice bran, etc. any of above preparation equipments are workable hence a pelletiser with conditioning screw. The prepared material is transported to the main extraction section via an chain conveyor. MAIN EXTRACTION The prepared material has above is received into extraction plant by an chain conveyor via an rotary air seal in the raw material receiver. an arrangement for controlling the level of material is fed into the extractor continuously from the receiver. The design of extractor is such that it can transport the material through the solvent spraying chambers and the speed of transportation can be varied easily. the chamber consist of number of solvent sprayer which in uniform sprays the solvent over the entire bed of raw material. The length and breadth in designed to give sufficient time for intimate contact and penetration and percolation of solvent into the raw material. To view the distribution of spray, provided on the extractor are light and sight viewing glasses. The material coming out of the spraying chamber is deoiled material, which is to recovered in the desolventising section. While the mixture of the oil and solvent called "miscella" is pumped into the miscella tank, from where it will be transported by means of a special chain conveyor to the desolventation. DESOLVENTATION The extracted material usually has a tendency for retaining the solvent with it, and this solvent has to be recovered. the retention varies from 20% to 35% weight of the material extracted. the basic principle involved in Desolventsation is indirect heating of material with the steam to a temperature well above boiling point on solvent and thus ensuring no solvent is left over with the material vapours are sent to condensers via scrubber where the solvent is condensed. As in the case of soyabean or cottonseed, an desolventiser toaster is recommended where the heating operation can be better controlled and higher rate of heating is possible to destroy unwanted enzymes present in the material. The rotary seals are provided at inlet and outlets of desolventisers to ensure an airtight arrangement. This is essential to keep the solvent loss figure down. The deoiled and desolventised meal thus obtained is then transported of finishing section with the help of a chain conveyor. A cooling arrangement consisting of meal cooler (Optional) thus ensuring proper cooling of the material for easy bagging in the finishing section and to add and hold moisture 1O to 12%. DISTILLATION Mixture of oil and solvent obtained in the extractor is known as "misceI|a" and it normally contains 12 to 18% of oil in the solvent in case of oilcakes/rice branlsoyabean and 25 to 35% in case of sunflowerseed I rapessed. During distillation, solvent evaporates first due to its low boiling point (65 to 75 degrees cen.) thus leaving clean oil behind. Distillation is performed in three stages under vacuum to ensure that no oxygen is present when the oil is heated to a high temperature. Presence of oxygen will exercise the oil making it unsuitable. First evaporation takes place in prime Miscella Flasher and concentrates in the second Flasher leaving practically only oil behind. This oil is further treated with open steam to ensure that the solvent finds its way along with the oil. The solvent vapour thus produced passes through oil vapour separator to separate out any oil particles trapped with solvent vapours and are then passed on to condensor for condensation. Vacuum in distillation is maintained with the help of evacuators. CONDENSATION Solvent vapours are formed both in desolventation section as well as in distillation section and these are to be condensed. Special floating head type condensor with tubes are provided. The floating head type condensers for complete condensation of solvent vapours. FINAL SOLVENT RECOVERY In spite of providing adequate Condensors, the air that is being injected out of the system contains traces of solvent. In order to recover the traces, a special final vent air-stripping column has been provided. It comprises of a main absorber which is fitted with stainless steel corrugated sheets to give a large surface of contact and its rotating. It is partly filled with groundnut oil being suitable absorbing media, which absorbs the solvent mixture, is distilled to recover the solvent. FINISHING SECTION The extracted and desolventised meal is transported to finishing section by means of a chain conveyor fitted with cooling arrangement. The material received has lots its inbuilt moisture, hence on a special hydrator; moisture is added to the cake thus increasing its weight.