SHARDA INDUSTRIAL CORPORATION

Fort, Mumbai, Maharashtra

STANDARD DUTY-PPG

Standard Duty multichem chemical composite are designed for handling wide range of very aggressive Chemicals where additional chemical resistance is needed with PTFE inner layers.

APPLICATION

Theassembly are recommended for Tank to process Chemical Handling, Storage tank transfer & Rail wagon loading and unloading of chemicals. The spiral wound Polypropylene coated galvanized iron outer wire for providing strength & the flexibility to maintain hose integrity under stress and strain

COMPLIANCE

Standard Duty Multichem Chemical composite hose are manufactured in accordance to BSE EN 13765/2010 Type2.

PRODUCT HANDLE

Highly corrosive acid and alkalis, aldehydes, amines, aromatic fuels, chlorinated hydrocarbon, alcohols, ketones, lacquers and petroleum products. Not suitable for service for many bromide, chloride or fluoride compounds. Refer to the chemical compatibility chart for specific recommendations.

FEATURES

1. Polypropylene liner with heavy duty polypropylene carcass for maximum chemical resistance.
2. Tough PVC outer cover resists to dragging wear, abrasion, UV and ozone resistance having maximum durability and safety.
3. Double end to end electrical continuity prevents static electricity build up and internal arcing.
4. Choice of Galvanized Iron / Stainless Steel 304 / 316 outer wire for maximum durability depending on external environment.
5. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : Stainless Steel 304 / 316 or PVDF Coated
• OUTER WIRE : High tensile strength galvanized steel or Stainless Steel 304 / 316
• CARCASS : Multiple layers of PTFE, polypropylene fabric, film and polyester barrier layers
• COVER : Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE : -30C to +80C
• FOR CHEMICAL HOSE : Please refer chemical resistance compatibility chart
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash

STANDARD DUTY-SPG

Standard Duty Aviation Fuel Suction and Discharge composite hoses are design for handling Aviation fuel, lubricant where light weight and high flexibility is required.

APPLICATION

hoses and hose assemblies are recommended for Rail Tank Wagon, Tank Truck Loading and Unloading, Storage tanks transfers and other standard duty applications.

COMPLIANCE

Standard Duty Aviation fuel suction and discharge composite hoses are manufactured in accordance to EN13765/2010 Type 2.

PRODUCT HANDLE

Specially for Aviation Fuel, Superior Kerosene & also can be used for gasoline, diesel fuel, paraffin, kerosene, lubricating oils and 100% aromatics as well as black oils and heavy lubricants and solvent not recommended for corrosive and aggressive chemicals.

FEATURES

1. Complete product compatibility for safe handling of Aviation Fuel & Superior Kerosene.
2. Light Weight & Highly Flexible makes it easy to handle in loading and delivery.
3. Tough PVC outer cover resists to dragging, wear, abrasion, UV and ozone resistance having maximum durability and safety.
4. Double end to end electrical continuity prevents static electricity build up and internal arcing.
5. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : Stainless steel 304 / 316
• OUTER WIRE : High tensile strength galvanized steel
• CARCASS : Multiple layers of polypropylene fabric, film and polyester barrier layers
• COVER : Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE : -30C to +80C
• END FITTING : As per client requirement which will be externally crimped or swaged

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765.
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

HEAVY DUTY-STG

Heavy Duty multichem PTFE dock chemical composite hose are ideal for marine services handling wide range of very aggressive Chemicals where additional chemical resistance is needed with PTFE inner layers.

APPLICATION

Theassembly are recommended for typical loading and unloading barges, ocean tanker and bunkering services also recommended for the other dock side operation at port installation. The spiral wound high tensile Stainless Steel 316 inner wire and Galvanized Iron or Stainless Steel under outer wire for providing strength & flexibility to maintain hose integrity under stress and strain of the ship and barge movement.

COMPLIANCE

Heavy Duty Multichem PTFE Dock Chemical composite hose are manufactured and tested EN13765 Type 3.

PRODUCT HANDLE

Very Aggressive or corrosive acid and alkalis, MTBE, Chlorinated hydrocarbons, aromatic fuels, alcohols where PTFE lining is mandatory. Refer to the chemical compatibility chart for specific recommendations.

FEATURES

1. Complete product compatibility for safe handling of all types very aggressive Chemicals, solvent, and acids including chloride and fluoride compounds.
2. PTFE Liner with polypropylene and polyester barrier layers for maximum chemical resistance.
3. Tough PVC outer cover resists to dragging, wear, abrasion, UV and ozone resistance having maximum durability and safety.
4. Choice of Galvanized Iron / Stainless Steel 304 / 316 outer wire for maximum durability depending on external environment.
5. Double end to end electrical continuity prevents static electricity build up and internal arcing.
6. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : Stainless Steel 340/ 316 or PVDF Coated
• OUTER WIRE : High tensile strength galvanized steel or Stainless Steel 340 / 316
• CARCASS : Multiple layers of PTFE, polypropylene fabric, film and polyester barrier layers
• COVER : Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE : -30C to +100C
• FOR CHEMICAL HOSE : Please refer chemical resistance compatibility chart
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765 type 3.
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

HEAVY DUTY-PPG

Heavy Duty multichem dock chemical composite hose are ideal for marine services handling wide range of Inorganic & Organic liquids, Chemicals & cargo at port installation.

APPLICATION

Theassembly are recommended for loading and unloading barges, ocean tanker and bunkering services also recommended for the other dock side operation at port installation. The spiral wound high tensile polypropylene coated galvanized iron inner wire and Galvanized Iron under outer wire for providing strength & flexibility to maintain hose integrity under stress and strain of the ship and barge movement.

COMPLIANCE

Heavy Duty Multichem Dock Chemical composite hose are manufactured and tested EN13765 Type 3.

PRODUCT HANDLE

Highly corrosive acid and alkalis, aldehydes, amines, aromatic fuels, chlorinated hydrocarbons, alcohols, ketones, lacquers and petroleum products. Not suitable for service for many bromides, chloride or fluoride compounds. Refer to the chemical compatibility chart for specific recommendations.

FEATURES

1. Complete product compatibility for safe handling of all types of Inorganic / organic liquids & other aggressive chemicals in dockside operations.
2. Tough PVC outer cover resists to dragging, wear, abrasion, UV and ozone resistance having maximum durability and safety.
3. Choice of High tensile strength galvanized steel / Stainless Steel 304 / 316 outer wire for maximum durability depending on external environment.
4. Double end to end electrical continuity prevents static electricity build up and internal arcing.
5. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : Polypropylene coated galvanized steel or Stainless Steel 304 / 316
• OUTER WIRE : High tensile strength galvanized steel or Stainless Steel 304 / 316
• CARCASS : Multiple layers of polypropylene fabric, film and polyester barrier layers
• COVER : Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE : -30C to +80C
• FOR CHEMICAL HOSE : Please refer chemical resistance compatibility chart
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765.
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

HEAVY DUTY

Heavy duty Gas hose are designed especially for transfer of fully refrigerated convey ants like LPG, LNG and their related convey ants in Gas group 4, 5, 7.

APPLICATION

Theassembly are recommended for fully refrigerated liquefied petroleum gasses and related conveyants in Gas group 4, 5, 7. The spiral wound Stainless Steel 316 inner wire and Stainless Steel 316 under wire for providing strength & the flexibility to maintain hose integrity under stress and strain.

COMPLIANCE

Gas hose are manufactured and tested in accordance EN 13766 Class A Type 1.

PRODUCT HANDLE

Gas hoses are suitable for transfer Ammonia, LPG, LNG, CNG, Liquid Nitrogen, Propane, Butadiene, Butylenes, Dimethylamide, Ethylamine, Ethyl Chloride, Methyl Acetylene, Methyl Bromide Propane Propadiene, Propylene, Vinyl Chloride, Refrigerant Gases. LPG While Composite hose are suitable for : Liquid Ethylene at -105C, Liquid Ethane at -88C

FEATURES

1. Maximum compatibility handles a wide range of low temperature and cryogenic conveyants.
2. Reliability Tested to industry standards 1 time the rated working pressure.
3. Durability Heavy duty Stainless Steel 316 inner and outer wire for maximum chemical and wear resistance.
4. Double end to end electrical continuity prevents static electricity build up and internal arcing.
5. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : Stainless steel 316 / 304
• OUTER WIRE : Stainless steel 316 / 304
• CARCASS : Multiple layers of Polyamide fabric, film and polyester barrier layers
• COVER : Polyamide fabric
• TEMPERATURE RANGE : -196C to +50C
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability.
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

These Polyurethane hose suspension saddles provides perfect hose support during fitting and operations for all types and sizes of hoses from 1 up to8

External rope lagging can be provided to protect from abrasion as well as acts as natural bending support. The rope also offers good insulation properties, particularly useful in the cryogenic applications.

RANGE OF HOSE COUPLINGS

SHARDA INDUSTRIAL CORPORATIONoffers a complete range of fittings for their hoses. Many of them are specified in the list of this guide, but virtually and type, for any use application can be supplied after consulting with our technical department. Adaptors, accessories, such as blank caps, dust plugs and delivery / filling nozzles are available.

MATERIALS

All the hose fittings may be obtained in a variety of materials according to the compatibility with various media, including Stainless Steel, Brass, Aluminum, Carbon steel, Polypropylene, PTFE, and for special application, metal fittings can be coated with special PTFE coating.

METHOD OF ATTACHMENT

hoses are generally supplied with factory end connections to customer requirements, from our factory. All metal components, including end fitting, are electrically bonded to give full end to end electrical continuity. On Specific request, electrically discontinuous hose assemblies can be provided. For all type of end fitting that enters the hoses and forms the mean by which the fittings is connected to the hose, is provided with scroll on the surface, that correspond to the pitch of the internal helix wire of the hose. Then, the end fittings will be attached to the hose by the use of a special designed lip seal, made from elastomeric materials depending on the chemical resistance to the product conveyed, and a material from elastomeric materials depending on the chemical resistance to the product conveyed, and an metal ferrule which can be externally swaged or crimped. This system guarantees a great safety to the complete assembly.