Hose Pipes #5861462

STANDARD DUTY

Multihigh Temp composite hose is designed for handling hot viscous petroleum by products and where high temperature upto +180C are requirement.

APPLICATION

Theassembly are recommended for handling hot viscous petroleum by products and where high temperature upto +180C are requirement. The Spiral wound high tensile galvanized iron / Stainless Steel inner wire and outer wire for providing strength & the flexibility to maintain hose integrity under stress and strain.

COMPLIANCE

Multihigh Temperature composite hose are manufactured to suite High Temperature requirement.

PRODUCT HANDLE

Hot viscous petroleum by-product such as Tar and Bitumen.

FEATURES

1. Complete product compatibility for safe handling of all types Hot viscous petroleum by-products such as Tar and Bitumen.
2. Heat Resistant Fiberglass fabric outer cover.
3. Double end to end electrical continuity prevents static electricity build up and internal arcing.
4. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : High tensile strength galvanized steel or Stainless Steel
• OUTER WIRE : High tensile strength galvanized steel or Stainless Steel
• CARCASS : Multiple layers of polyamide fabric, film
• COVER : Heat Resistant Fiberglass fabric
• TEMPERATURE RANGE : -30C to +180C (However pressure rating will reduce by 50% when temperature exceed 100C)
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765.
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

HEAVY DUTY-STG

Standard Duty Multichem PTFE Chemical hoses are designed for handling wide range of aggressive chemicals, solvents and acids including chloride and fluoride compounds. PTFE inner layers and other special barrier layers assure maximum product life in application and clean transfer are critical. Electrical continuity is achieved by two wires bonded to end fittings, this helps dissipate accumulated charges to avoid static flash.

APPLICATION

Theassembly are recommended and designed for in plant transfers. Tank to process Chemical Handling, Storage tank transfer & Rail Wagon loading and unloading of many Aggressive Chemicals, solvents and acids including chloride and fluoride compounds. The spiral wound Stainless Steel 304 / 316 inner wire and Galvanized iron outer wire for providing strength and the flexibility to maintain hose integrity under stress and strain.

COMPLIANCE

Standard Duty Multichem PTFE Dock Chemical composite hoses are manufactured in accordance to EN13765/2010 Type2.

PRODUCT HANDLE

Very Aggressive or corrosive acid and alkalis, MTBE, Chlorinated hydrocarbons, aromatic fuels, alcohols where PTFE lining is mandatory.

FEATURES

1. Complete product compatibility for safe handling of all types very aggressive Chemicals, solvent, and acids including chloride and fluoride compounds.
2. PTFE Liner with polypropylene and polyester barrier layers for maximum chemical resistance.
3. Tough PVC outer cover resists to dragging, wear, abrasion, UV and ozone resistance having maximum durability and safety.
4. Choice of Galvanized Iron / Stainless Steel 304 / 316 outer wire for maximum durability depending on external environment.
5. Double end to end electrical continuity prevents static electricity build up and internal arcing.
6. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE : Stainless Steel 304 / 316 or PVDF Coated
• OUTER WIRE : High tensile strength galvanized steel or Stainless Steel 304 / 316
• CARCASS : Multiple layers of PTFE, polypropylene fabric, film and polyester barrier layers
• COVER : Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE : -30C to +100C
• FOR CHEMICAL HOSE : Please refer chemical resistance compatibility chart
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

STANDARD DUTY-GPG

Standard Duty Oil Suction and Discharge Composite hoses are designed for handling wide range of fuel, lubricant where light weight and high flexibility is required.

APPLICATION

hoses and hose assemblies are recommended for Rail Tank Wagons, Tank Truck Loading and Unloading, Storage tanks transfers and other standard duty applications.

COMPLIANCE

Standard Duty Multi oil suction and discharge composite hoses and manufactured in accordance to EN 13765 / 2010 Type 2.

PRODUCT HANDLE

Gasoline, high speed diesel, paraffin, kerosene, lubricating oil and 100% aromatics as well as black oils and heavy lubricants and solvents.

FEATURES

1. Complete product compatibility for safe handling of all types of oil based 100% aromatic content and other non aggressive chemicals.
2. Light Weight & Highly Flexible makes it easy to handle in loading and unloading.
3. Tough PVC outer cover resists to dragging, wear, abrasion, UV and ozone resistance having maximum durability and safety.
4. Double end to end electrical continuity prevents static electricity build up and internal arcing.
5. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE: High tensile strength galvanized steel
• OUTER WIRE: High tensile strength galvanized steel
• CARCASS: Multiple layers of polypropylene fabric, film and polyester barrier layers
• COVER: Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE: -30C to +80C
• FOR CHEMICAL HOSE: Please refer chemical resistance compatibility chart
• END FITTING: As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with BSEN 13765.
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.

HEAVY DUTY-GPG

Heavy duty oil marine hose are designed for handling fuel, lubricant and 100% aromatics at requireddischarge pressure or suction at port installation.

APPLICATION

Theassembly are recommended for loading and unloading barges, ocean tanker and bunkering services also recommended for the other dock side operation at port installation. The spiral woung high tensile galvanized iron inner wire and outer wire for providing strength and the flexibility to maintain hose integrity under stress and strain of the ship and barge movement.

COMPLIANCE

Heavy Duty Marine hoses are manufactured and tested in accordance to EN 13765 type 3

PRODUCT HANDLE

Gasoline, Diesel fuel, paraffin, kerosene, lubricaring oils and 100% aromatics as well as black oils and heavy lubricants and solvents.

FEATURES

1. Complete product compatibility for safe handling of all types of oil based 100% aeromatic.
2. Tough PVC outer cover resists to dragging wear, abrasion, UV and ozone resistance having maximum durability and safety.
3. Double end to end electrical continuity prevents static electricity build up and internal arcing.
4. Suitable for 0.9 Bar Vacuum rating.

CONSTRUCTIONS

• INNER WIRE :High tensile strength galvanized steel
• OUTER WIRE : High tensile strength galvanized steel
• CARCASS : Multiple layers of polypropylene fabric, film and polyester barrier layers
• COVER : Abrasion resistant PVC impregnated fabric
• TEMPERATURE RANGE : -30C to +80C
• FOR CHEMICAL HOSE : Please refer chemical resistance compatibility chart
• END FITTING : As per client requirement which will be externally crimped or swaged

SAFETY

• assemblies are tested at 1.5 times rated W.P for safety & reliability in accordance with EN 13765
• Manufacturer test certificate will be provided with the supply.
• Burst pressure Indicated is at ambient temperature.
• Electrically continuity is achieved by the two wire bonded to the end fitting, this helps dissipate accumulated charge and to avoid static flash.