We are offeringESD Safe Crateto our clients.

Features:

• ESD Crate Partitions
• Welded Crate Partitions
• Slotted Crate Partitions

We are offering Dry cabinet.

we are counted among the leaders in supplying premium grade ofcomponent organizersto the customers. Procured from reliable vendors of the industry, these products are made up of high-quality raw material which keeps them in line with the pre-set quality standards of the organization.

specifications:

• size of drawers: 150mm * 75mm * 35mm
• art no: aco 25 with drawers
• cabinet size: 400mm * 250mm * 160mm

Description:

• Strong rear lip for use with louvered panels.
• Strong heavy duty, with reinforced base side & stacking rim.
• Resistant to most industrial solvents.
• Clear access to contents.
• All bins with identification card holder slots.

Technical Information:

• Governing Specifications: BS 2050 / 1978IS 3462 / 1986

Electrical Properties:

• Surface Resistivity: 10⁸ 10¹⁰ohms / sq.
• Decay Time: Less than 2 seconds.

Resistance to Chemicals:

• Offers above average resistance from mild and diluted acids alkalis.
• The surface has to be cleaned immediately is case concentrated acid or alkalis spill.

Installation:

• Ensure sub floors are smooth, dry, clean structurally sound.
• We recommend FEVICOL SR 998 / SR 505 or any equivalent rubber based adhesive for laying.
• For clean room conditions, Thermo Welding is recommended.

Maintenance:

• The surface should be cleaned daily with the damp mop and weekly or fortnightly with Antistatic Floor Cleaners.
• To remove stubborn stains rub the affected area with coir brush or fine steel wool NO.000 soaked in warm soap solution. Use water to remove chemical spillage on the flooring.
• Do not throw lighted butts or match sticks on the floor.
• Avoid dragging heavy furniture or objects so as to avoid scratches on the floor.

Features:

• Strain-free bi-ocular view for comfortable, long work hours
• Aesthetically pleasing and lasting powder coat surface finishes for the land. The concealed spring mechanism allows easy cleaning. Better for work in clean rooms.
• Electronic ballast makes the unit run even at a low voltage of 190 V A robust model with a design that conceals the balancing mechanism. Easier to clean.

Features :

• Common type and heat resistance type are available.
• The top and bottom boards are made of metal.
• Stationary type.
• Adjustable through screws.

• Surface Resistivity Meteroffered to comprise battery operated meters that provide functioning as the portable instrument for measuring the surface resistivity of flat surfaces.
• These find use in the circuit industry for checking products like component storage bags, workbench surfaces, conveyor belts and others which come with resistance values and require meeting stringent specifications.

Features :

• Micro processor based pid control Digital Soldering Station.
• Digital display for temperature reading.
• Japanese ceramic heater with quick heat recovery.
• Wide range of inter changeble soldering bits & nozzels.
• Long life soldering iron bit with oxygen free copper & 300 micron iron plating covered with nickel & chrome.
• Micro control system, digital display, easy to work with
• Pulses heating method, protect heating element, hot air blower from over heating, thus prolongs the machines service life.
• Automatic cool off system, protect the heater from over heating.
• Sleek and light weight Soldering iron & Hot air handle.

Features:

• Advance PID Type Dual Display Temperature Controller with settable Overshoot Alarm.
• Specially designed fins type Air Immersion Heaters
• Heavy Duty Solid State Relay For Heater Supply
• Door Sealed with Silicon Rubber Gasket
• Air Circulation System to maintain uniform temperature inside the chamber
• Safety Thermostat ( In GMP Models only)
• Various Sizes are available.

features:1. Lens material : glass2.

leans size : 43.

diopter : 3 diopter +12 diopter4.

voltage : 110v 120v / 22v 240v5.

light source : 12w circular fluorescent lamp6.

supplied with : electronic ballast7.

standard mount : table base8.

colour available : white & black

• ESD Safe Work Stationoffered to find extensive use in the electronic manufacturing sector where these provide support in safeguarding sensitive electronic components from harmful static discharges.
• For safe working, the workstation is provided with proper grounding that allows superior dissipation of discharge safely.
• Some of its features include featuring the use of static dissipative table top made of special ESD, available in different size options, coming with illumination support for work area and others.

Micro supersonics offers a wide range ofUltrasonic Cleanersas well as the selection of cleaning chemical for achieving the required cleaning results.
Features:

• Powerful Ultrasonic oscillations produced by a solid state generation or SMPS based generator are converted into mechanical vibrations by PZT Transducers. These vibrations produce intense scrubbing action throughout the liquid media which intern pulls out the contaminants from hidden recess and crevices of complicated assemblies. Ultrasonic also accelerates the chemical action of cleaning media (water and solvents).
• Features:

High purity alloy that is composed of 60% Tin and 40% Lead from virgin metals.
1. Applies at hand or feed soldering processes in Electronics & Electrical assemblies.
2. Non-corrosive and no impact of flux residues forming at post soldering which means of passing in pin probe & flying probe tests for No Clean solder wires.
3. If required, flux residues shall be cleaned with appropriate liquid application.
4. Prcised amount of flux cored from state-of the-art-technology manufacturing process.

Features :

• Compact design & light weight hot air blower meet various soldering demands and remove kinds of chips in repair work
• Hot air temperature and volume adjustable, ideal for QTF, SOP, PLLCC, and SOJ chips removing
• Micro control system, digital display, easy to work with
• Pulses heating method to protect heating element, hot air blower from overheating, thus prolongs the machines service life.
• Automatic cool off system to protect the heater from overheating

Features

• Useful tool to strip off the toughest PTEE (Teflon) insulation on wire with ease
• Low voltage operation from an isolated transformer
• Notched replaceable blades for perfection grip on wire having long life
• Handset with flat blades also available
• Variable temperature from 100 - 500 C

features:

• machine for 2 wires at a time, of upto1.5 mm²
• high speed machine
• upto 2 mid-marking (for middle strippings) possible
• machine and controls in a single housing

salient feature:-

• machine controlled with plc.
• touch panel display having easy to use graphic interface
• fully automatic machine. The setting is completely digitized and mostly automatic.
• machines for both side stripping.
• (can also do single side stripping and also only cutting).
• "microprocessor controlled machines with the smart display.
• fully automatic machine. The setting is completely digitized and mostly automatic.
• compressor not required, silent operation.

ESD Tilesoffered is designed to provide the necessary safeguard from static electricity that can be a major problem area in the electronic manufacturing environment. Here, these flooring tiles provide effective support in draining of electrostatic charge. Some of its features include superior dimensional stability and compressive strength, available with the static conductive range of

Features:

• Standard Type- 2pcs, single-side flash board+2pc double - side flashboard
• Each column could insert 100 pcs PCB, three columns can keep in 300 pcs
• The extra double sideboard can be added
• Sideboard material: ABS, carbon steel shelf

Adjustable trolley designed for the safe storage & transportation of SMD Reels & assemblies within the shop floor. Frame is Semi conductive epoxy powder coated, gap between shelves is adjustable, conductive lockable castor wheels for easy movement.

Features :

1. Static disipative leather upholstery.
2. Surface Resistivity of leather

what it does:

the ion air gun along with its hv power supply and air compressor forms a system which is designed to neutralize static charges up to a distance of 1m. (air compressor and air hose not supplied by us) it removes static, contaminants and dust from flat surfaces as well as solid objects prior to assembly, packaging, painting, and finishing. This makes the gs4000 an effective local area cleaner.

it gives aself-balanced ion outputwhich is suitable even if the air is to be blown onto critical electronic components, open pcbs or assemblies. This ensures that no residual charge of either polarity is left over.

how it works:

the gs4000 incorporates a high-velocity air jet and electrically charged emitter points. The compressed air passing through the gun gets ionized and this ion rich air is capable of neutralizing static charges very rapidly. The air flow can be easily controlled and regulated from a gentle breeze to a high blast, by squeezing the trigger.

We are offeringESD Safe Crateto our clients.

Features:

• ESD Crate Partitions
• Welded Crate Partitions
• Slotted Crate Partitions

We are offering Dry cabinet.

we are counted among the leaders in supplying premium grade ofcomponent organizersto the customers. Procured from reliable vendors of the industry, these products are made up of high-quality raw material which keeps them in line with the pre-set quality standards of the organization.

specifications:

• size of drawers: 150mm * 75mm * 35mm
• art no: aco 25 with drawers
• cabinet size: 400mm * 250mm * 160mm

Description:

• Strong rear lip for use with louvered panels.
• Strong heavy duty, with reinforced base side & stacking rim.
• Resistant to most industrial solvents.
• Clear access to contents.
• All bins with identification card holder slots.

Technical Information:

• Governing Specifications: BS 2050 / 1978IS 3462 / 1986

Electrical Properties:

• Surface Resistivity: 10⁸ 10¹⁰ohms / sq.
• Decay Time: Less than 2 seconds.

Resistance to Chemicals:

• Offers above average resistance from mild and diluted acids alkalis.
• The surface has to be cleaned immediately is case concentrated acid or alkalis spill.

Installation:

• Ensure sub floors are smooth, dry, clean structurally sound.
• We recommend FEVICOL SR 998 / SR 505 or any equivalent rubber based adhesive for laying.
• For clean room conditions, Thermo Welding is recommended.

Maintenance:

• The surface should be cleaned daily with the damp mop and weekly or fortnightly with Antistatic Floor Cleaners.
• To remove stubborn stains rub the affected area with coir brush or fine steel wool NO.000 soaked in warm soap solution. Use water to remove chemical spillage on the flooring.
• Do not throw lighted butts or match sticks on the floor.
• Avoid dragging heavy furniture or objects so as to avoid scratches on the floor.

Features:

• Strain-free bi-ocular view for comfortable, long work hours
• Aesthetically pleasing and lasting powder coat surface finishes for the land. The concealed spring mechanism allows easy cleaning. Better for work in clean rooms.
• Electronic ballast makes the unit run even at a low voltage of 190 V A robust model with a design that conceals the balancing mechanism. Easier to clean.

Features :

• Common type and heat resistance type are available.
• The top and bottom boards are made of metal.
• Stationary type.
• Adjustable through screws.

• Surface Resistivity Meteroffered to comprise battery operated meters that provide functioning as the portable instrument for measuring the surface resistivity of flat surfaces.
• These find use in the circuit industry for checking products like component storage bags, workbench surfaces, conveyor belts and others which come with resistance values and require meeting stringent specifications.

Features :

• Micro processor based pid control Digital Soldering Station.
• Digital display for temperature reading.
• Japanese ceramic heater with quick heat recovery.
• Wide range of inter changeble soldering bits & nozzels.
• Long life soldering iron bit with oxygen free copper & 300 micron iron plating covered with nickel & chrome.
• Micro control system, digital display, easy to work with
• Pulses heating method, protect heating element, hot air blower from over heating, thus prolongs the machines service life.
• Automatic cool off system, protect the heater from over heating.
• Sleek and light weight Soldering iron & Hot air handle.

Features:

• Advance PID Type Dual Display Temperature Controller with settable Overshoot Alarm.
• Specially designed fins type Air Immersion Heaters
• Heavy Duty Solid State Relay For Heater Supply
• Door Sealed with Silicon Rubber Gasket
• Air Circulation System to maintain uniform temperature inside the chamber
• Safety Thermostat ( In GMP Models only)
• Various Sizes are available.

features:1. Lens material : glass2.

leans size : 43.

diopter : 3 diopter +12 diopter4.

voltage : 110v 120v / 22v 240v5.

light source : 12w circular fluorescent lamp6.

supplied with : electronic ballast7.

standard mount : table base8.

colour available : white & black

• ESD Safe Work Stationoffered to find extensive use in the electronic manufacturing sector where these provide support in safeguarding sensitive electronic components from harmful static discharges.
• For safe working, the workstation is provided with proper grounding that allows superior dissipation of discharge safely.
• Some of its features include featuring the use of static dissipative table top made of special ESD, available in different size options, coming with illumination support for work area and others.

Micro supersonics offers a wide range ofUltrasonic Cleanersas well as the selection of cleaning chemical for achieving the required cleaning results.
Features:

• Powerful Ultrasonic oscillations produced by a solid state generation or SMPS based generator are converted into mechanical vibrations by PZT Transducers. These vibrations produce intense scrubbing action throughout the liquid media which intern pulls out the contaminants from hidden recess and crevices of complicated assemblies. Ultrasonic also accelerates the chemical action of cleaning media (water and solvents).
• Features:

High purity alloy that is composed of 60% Tin and 40% Lead from virgin metals.
1. Applies at hand or feed soldering processes in Electronics & Electrical assemblies.
2. Non-corrosive and no impact of flux residues forming at post soldering which means of passing in pin probe & flying probe tests for No Clean solder wires.
3. If required, flux residues shall be cleaned with appropriate liquid application.
4. Prcised amount of flux cored from state-of the-art-technology manufacturing process.

Features :

• Compact design & light weight hot air blower meet various soldering demands and remove kinds of chips in repair work
• Hot air temperature and volume adjustable, ideal for QTF, SOP, PLLCC, and SOJ chips removing
• Micro control system, digital display, easy to work with
• Pulses heating method to protect heating element, hot air blower from overheating, thus prolongs the machines service life.
• Automatic cool off system to protect the heater from overheating

Features

• Useful tool to strip off the toughest PTEE (Teflon) insulation on wire with ease
• Low voltage operation from an isolated transformer
• Notched replaceable blades for perfection grip on wire having long life
• Handset with flat blades also available
• Variable temperature from 100 - 500 C

features:

• machine for 2 wires at a time, of upto1.5 mm²
• high speed machine
• upto 2 mid-marking (for middle strippings) possible
• machine and controls in a single housing

salient feature:-

• machine controlled with plc.
• touch panel display having easy to use graphic interface
• fully automatic machine. The setting is completely digitized and mostly automatic.
• machines for both side stripping.
• (can also do single side stripping and also only cutting).
• "microprocessor controlled machines with the smart display.
• fully automatic machine. The setting is completely digitized and mostly automatic.
• compressor not required, silent operation.

ESD Tilesoffered is designed to provide the necessary safeguard from static electricity that can be a major problem area in the electronic manufacturing environment. Here, these flooring tiles provide effective support in draining of electrostatic charge. Some of its features include superior dimensional stability and compressive strength, available with the static conductive range of

Features:

• Standard Type- 2pcs, single-side flash board+2pc double - side flashboard
• Each column could insert 100 pcs PCB, three columns can keep in 300 pcs
• The extra double sideboard can be added
• Sideboard material: ABS, carbon steel shelf

Adjustable trolley designed for the safe storage & transportation of SMD Reels & assemblies within the shop floor. Frame is Semi conductive epoxy powder coated, gap between shelves is adjustable, conductive lockable castor wheels for easy movement.

Features :

1. Static disipative leather upholstery.
2. Surface Resistivity of leather

what it does:

the ion air gun along with its hv power supply and air compressor forms a system which is designed to neutralize static charges up to a distance of 1m. (air compressor and air hose not supplied by us) it removes static, contaminants and dust from flat surfaces as well as solid objects prior to assembly, packaging, painting, and finishing. This makes the gs4000 an effective local area cleaner.

it gives aself-balanced ion outputwhich is suitable even if the air is to be blown onto critical electronic components, open pcbs or assemblies. This ensures that no residual charge of either polarity is left over.

how it works:

the gs4000 incorporates a high-velocity air jet and electrically charged emitter points. The compressed air passing through the gun gets ionized and this ion rich air is capable of neutralizing static charges very rapidly. The air flow can be easily controlled and regulated from a gentle breeze to a high blast, by squeezing the trigger.