Shanti Boilers & Pressure Vessels Pvt. Ltd.

Nacharam, Hyderabad, Telangana

Shanti agro flame husk fired boiler is specially designed for husk as fuel . It is ideally suited for rice mill and industries where husk is easily available as fuel. The boiler is packaged and is skid mounted.

Optimum EfficiencyDesigned on Low RPM for durabilityLow NoiseDimensioal AccuracyLess Power consumption

Shanti Boilers brings with its vast experience in heating solution a efficiency and compact range of Hot Water Generators. The design of Hot Water Generators are much superior than conventional coil type designs . Shanti Hot Water Generators are skid mounted Shell and Tube Two & three pass designs. Due to the design our hot water boilers are efficient and durable. Our range of hot water generator comes in multiple fuels like solid , liquid & gaseous fuels . Theses are generally suitable for Dairies, Hotels, Hospitals applications . Available in Vertical and Horizontal Smoke Tube Types, their ability to ensure high recovery rates, makes them an economical heating system. For the best quality HotWater Generators, Shanti Boilers is the best choice. Shanti Boilers offers compact designed Hot Water Generators with specialized features shell and tube type integral combustion chamber . It is fully automatic powered by a temperature sensing device installed which controls the burner at pre-set temperature.

Model Name : Shanti Staids Hot Water Generators

Model No : SB-HWG Series Fuels : Oil / Gas / Coal / Wood / Biomass Briquettes.

Capacities

Heat Outpuat Capacity : 50, 000 Kilo calories to 10, 00, 000 Kilo Calories

Firing Mode : Fully Automatic in case of Oil / Gas fired systems ; Manual in case of Solid fuels.

Features

• Shell & Smoke tubes Multiple pass design ensures efficiency , reliability & durability

• Fully automatic in case of Oil & gas ensure smooth operation.

• Out side the perview of IBR / 3^rd Party Inspections & registrations

• Negligible maintenance downtime

• More efficient than conventonal coil type designs

Applications

Shanti Hot Water Generators are usually used in hotels, hospitals, hostels and other process where only hot water is needed

Shanti Boilers with its wast experience in quality fabrications and a state of art infrastructure , we take up heavy fabrication jobs like Economizer coils , Bed coils , Chimneys , Steam Accumulators , Steam Autoclaves , Bulk Storage Silos , Storage Vessels , Columns and Kettles , Air Receivers etc., .

We take up customized fabrication jobs approved as per ASME , IBR , APE , BS , DIN , IS regulations and with 3^rd party inspection like TATA Projects , Llyods , TUV and other international agencies.

We have a fabrication shop of 20000 SFT floor area with 20 Tons capacity materials handling facility and fully automatic CNC cutting machine for plate cutting up to 100 mm, Radial Drilling Machines , Plate Bending Machines upto 50 mm Thickness plate, Pipe Bending Machines , 250 Tons Hydraulic Press to name a few.

We follow high standard in our manufacturing practices, in compliance to world renowned 3^rd party inspection agencies and our stringent quality assurance checks which ensures reliability and quality

n present scenario of rising fuel prices Shanti Boilers offers wide range of efficient energy conservation products like Air Pre Heaters , Water Pre Heaters , Condensate Recovery Pumps , Pressure Regulating Stations , Thermo Static Steam Trap

Air / Water Pre Heaters :Shanti Boilers Air Pre Heater / Waer pre Heater are design to utilize the high temperature flue gases and recover it, by either pre- heating combustion air going to the furnace or to heat the water at the ambient temperature to 75-80 deg c . The objective is to harness fully the available heat from flue gases and increase the over all efficiency of Boiler by optimally designing the Heat Recovery Units there by it results in fuel saving for the industry.

Model : SB-APH & SB-WPH Series

Type: Vertical / Horizontal design

In present scenario of rising fuel prices Shanti Boilers offers wide range of efficient energy conservation products like Air Pre Heaters , Water Pre Heaters , Condensate Recovery Pumps , Pressure Regulating Stations , Thermo Static Steam Trap

Air / Water Pre Heaters :Shanti Boilers Air Pre Heater / Waer pre Heater are design to utilize the high temperature flue gases and recover it, by either pre- heating combustion air going to the furnace or to heat the water at the ambient temperature to 75-80 deg c . The objective is to harness fully the available heat from flue gases and increase the over all efficiency of Boiler by optimally designing the Heat Recovery Units there by it results in fuel saving for the industry.

Model : SB-APH & SB-WPH Series

Type: Vertical / Horizontal design

Shanti- Thermic Fluid Heater is a forced circulation system, where oil is heated in radiant and convective coils which is circulated through a pump to the process and back . The same oil is reheated, The thermic oil flows in close circuit . These are used generally where the process temperature required in high . The thermic fluid heater is manufactured as per latest technology to ensure optimum thermal & combustion efficiency. These units are deisgned for cleaner fuels like Oil / Gas the higher heat flux ensures better heat transfer. Its valves and controls are designed for smooth and safe operations. These units are fully automatic with use of one of the best combustion systems avaliable like Bentone , Oilon , Riello as per the clients preference .

Construction:Shanti Solid fuel fired Thermic Fluid Heater assembly consists of concentric helical coils housed in a sturdy shell. The coils are manufactured out of superier BS: 3059-68/PART-II / Seamless Pipes . The plates are cut to close tolerance on automatic flame cutting machines and are welded as per standard codes.

Model Name : Shanti Therm

Model No : STF-OF/GF Series Fuels : Oil / Gas.

Capacities

Heat Outpuat Capacity : 100000 Kilo calories to 40, 00, 000 Kilo Calories

Firing Mode : Fully Automatic

Features

• Use of superier Boiler grade raw materials like Pipes / Tubes ensure durability and long life

• Fully automatic ensure smooth operation.

• Out side the perview of IBR / 3^rd Party Inspections & registrations

• More grate area & volume & heat transfer area ensures rated output

• Air pre-heater provided for higher efficiency

• Temperature as high as 280C

• No corrosion or scaling & Water require

• Negligible maintenance downtime
  

Applications

Shanti Thermic Fluid heaters are ideally suited for processes where higher temperature is required like Food process industries , solvent plants , pharmaceuticals etc.

Shanti Air Handling (AH) Division was established in 2006 to serve the needs of industries requiring Air Pollution Control System. We manufacture Pollution Control Equipments , right from Single cyclone dust collection systems, Multi Cone Cyclone Dust Collectors , Pulse Jet Bag filter, Reverse Air Bag House, Wet Settling Chambers, Wet Scrubber .We intend to be One Stop Shop our clients requirements right from Boilers to balance of plants including pollution control equipment, which in todays scenario is become utmost importance.

Types of Pollution Control Equipment:

Pulse Jet bag Filters

Multi Cone Dust Collectors

Wet Scrubbers

Pulse Jet Bag Filter

Shanti pulse jet bag filters are one of the most efficient and cost effective solution for pollution control emmiting of Boilers . Its a online pulse jet bag filter, where the dust /ash from the industrial boilers gets trapped in specially installed high temperature bags through which flue gas is allowed to pass. Such dust and ash is cleaned row by row and this sequence is controlled through a controller. The dust particulars are deposited at the outer surface of the bag and are removed in a pre-timed cycle by a pulse jet of high pressure air sourced from an air compressor. This highly advanced process streamlines the dust particulars into the RAV with the help of hopper and ensures that only clean air moves out from the center of the bag & escapes out of flue gas outlet. Our bag filters are designed with optimal air to cloth ratio ensuring efficient performance.

Shanti uses superior raw materials like high temperature fiber glass bags for reliability and durability.

Single Cyclone Dust Collectors

Shanti Single Cyclone Dust Collectors are designed on Vertex separation science . The dust collectors are designed so to provide cyclonic and rotation effect to separate dense particulate matter in the flue gases . A high circulating air flow is allowed to travel in a helical pattern from the top of the dust collector . This creates higher inertia and follow tight curve this ideal rotation effect will force the dense particulate mater to settle at the bottom of the cone , which in turn is removed manually or mechanically. Single Cone dust collectors are more suitable for biomass fuels like Wood , Briquettes only.

In present scenario of rising fuel prices Shanti Boilers offers wide range of efficient energy conservation products like Air Pre Heaters , Water Pre Heaters , Condensate Recovery Pumps , Pressure Regulating Stations , Thermo Static Steam Trap

Air / Water Pre Heaters : Shanti Boilers Air Pre Heater / Waer pre Heater are design to utilize the high temperature flue gases and recover it, by either pre- heating combustion air going to the furnace or to heat the water at the ambient temperature to 75-80 deg c . The objective is to harness fully the available heat from flue gases and increase the over all efficiency of Boiler by optimally designing the Heat Recovery Units there by it results in fuel saving for the industry.

Model : SB-APH & SB-WPH Series

Type: Vertical / Horizontal design

Shanti Boilers offers Pressure Regulating Station where the process requires high volume of steam at a consistent low or high pressure. Installing a Pressure Regulating Station popularly known as PRS ensures the optimal and efficient running of the Boiler there by resulting in fuel saving.

Our Pressure Regulating Stations consist of superior quality of valves and pressure regulating valves with onsite service support.

Features Fully automaticHigh thermal efficiencyHigh combustion efficiencyAir pre-heater provided for higher efficiencyTemperature as high as 300 CNo corrosion or scalingFlame monitoring sensor providedNegligible maintenance downtimePrompt pre & after sales service.

Mechanical Collectors are particulate mater control devices that use gravity settling inertia, dry impaction processes to collect pollutants. Mechanical collectors are reasonably tolerant of high dust loadings. Cyclones force incoming gas streams to abruptly change direction in tight, spiral pattern. Large Particulars entering with the gas stream cannot turn with the gas because of their momentum (or inertia). As a result, these particulars "break out" of the gas stream and hit the wall of the cyclone. The particles then fall down the wall and collected in hopper.

We are offering cogen plants. Range:evaporation capacity varies from2000 kghr-15000 kghr working pressure:10.54 kg to 26 kgsq.cmconversion of existing non fbc boiler into fbc system with lesscapital investment can be done easily.

We are offering boilers erector. Range:evaporation capacity varies from2000 kghr-15000 kghr working pressure:10.54 kg to 26 kgsq.cmconversion of existing non fbc boiler into fbc system with lesscapital investment can be done easily.

SHANTI Electrode Generator series is fully automatic Electrode Steam Boiler which is a steam packaged unit. It comprises of boiler, feed-pump and the controls together with the feed tank, all housed on a heavy MS Platform. The finish is Elegant.

'STAIDS' Generators brings about a central Hot water system, for continuous supply of Hot water in your hotel and 'STAIDS' Generators are robust in construction and are designed to be the most efficient in heat transfer to give you years and years of efficient service.

SHANTI-THERM is constructed with a Heater assembly which consists of concentric helical coils housed in a sturdy shell. Coils are manufactured out of BS: 3059-68PART-ICEWST -33 which are tested to 1000 PSI. The plates are cut to close tolerance on automatic flame cutting machines, and are welded as per standard codes.

SHANTI BOILERS are the pioneers in manufacturing Boilers in A.P and have over 50 years of experience in the boiler industry. This has enabled Shanti Boilers to invest considerable effort to understand impurities in water and its treatment. Our water treatment and chemical division has given rise to solutions to manage water to ensure that both you and the ecology profit.

BOILERS are the pioneers in manufacturing Boilers in A.P and have over 50 years of experience in the boiler industry. This has enabled Shanti Boilers to invest considerable effort to understand impurities in water and its treatment. Our water treatment and chemical division has given rise to solutions to manage water to ensure that both you and the ecology profit.

We are dealing best Pressure Vessels supplying company.

Shanti Enviro Division, Industrial Blowers Industrial Fans has been solving Air and Dust Pollution Problems and offers wide range of Types of Pollution Control Equipments Bag FiltersPulse Jet bag FiltersSingle Cone Dust CollectorsMulti Cone Dust CollectorsWet ScrubbersConveying Systems