Shanghai Yakoon Intelligent Instrument Company

Delhi Cantt, Delhi

Vibration Transmitter YKFB-YB40

ZMFB-YB40 is a vibration transmitter used for real-time monitoring of vibration of rotating machinery bearing, also known as integrated vibration sensor, with explosion-proof structure. It is a kind of absolute vibration measurement of the machine, which can be installed on the bearing seat or housing of the machine to monitor the machine in real time. At the same time, the two-wire system outputs 4-20 mA current signal, which can be directly supplied to PLC or DCS and other control systems in the control room. If there is a machine fault caused by bearing wear, bearing cracking, poor dynamic balance and no medium factors, the integrated vibration transmitter can detect the fault in advance and send an alarm to prevent the machine from continuing to work under bad conditions and damage. This type of integrated vibration transmitter is a vibration transmitter integrating vibration sensor and signal regulating circuit, which can directly transform the vibration signal collected in the field into 4 20mA current signal output. The output signal can be directly transmitted to PLC, DCS monitor, collector, recorder or other monitoring equipment.

Technical Specs:

Input: DC12v-dc28v (power supply by two-wire loop)

Measuring range: 0 10/20*/50/100mm/s (range optional: vibration velocity value/vibration intensity) Default range: 0-20mm/s Or 0 100/200 * / 500/1000um (Range optional: vibration displacement/vibration amplitude) Default range: 0-200 microns

Output: 4 20mA (or 1-5v / 2-10v)

Output Impedance:

YK-CL20 vibration transmitter combined vibration sensor and transmission module together.It is for real-time monitoring of vibration of rotating mechanical bearings, also known as integrated vibration sensor. It integrates the vibration sensor and the signal conditioning circuit. It can directly convert the collected vibration signal into a 420mA current signal or the RS485 digital output, then transmit to control system.

It is widely used in bearing vibration measurement and real-time monitoring of rotary machinery such as submersible pumps, pumps, fans, steam turbines, coal mills, oxygen generators, generators, centrifuges, compressors, motors, etc. It can also be applied to low-frequency vibration measurement of the impact of environmental vibration values on equipment such as underground pipelines, and automotive industry.

Technical Specs:

Input: +DC24V

Measuring range: 010/20*/50/100mm/s or 0100/200*/500/1000um

Output: 4-20mA (or 1-5V/1-10V or RS485)

Output Impedance :

piezoelectric vibration accelerometer yk-yd20

yk-yd20 piezoelectric vibration sensor is widely used in bearing vibration measurement and real-time monitoring of rotary machinery such as submersible pumps, pumps, fans, steam turbines, coal mills, oxygen generators, generators, centrifuges, compressors, motors, etc. It can also be applied to low-frequency vibration measurement of the impact of environmental vibration values on equipment such as underground pipelines, and automotive industry.

technical parameters:

• input: dc 15-36v
• measuring range: 0-10mm/s (+-5%)
• output: 4-20 ma
• frequency range: 4-2000hz
• maximum shock level: 2000g
• working temperature-4085
• output: two-wire
• sealing: laser welding
• weight: 130g
• size: 2254mm
• case material: 304 stainless steel
• mounting method: m6 or customized

Magnetic Vibration Transmitter YKT-YB40

YKT-YB40 vibration transmitter combined vibration sensor and transmission module together.It is for real-time monitoring of vibration of rotating mechanical bearings, also known as integrated vibration sensor. It integrates the vibration sensor and the signal conditioning circuit. It can directly convert the collected vibration signal into a 420mA current signal or the RS485 digital output, then transmit to control system.

It is widely used in bearing vibration measurement and real-time monitoring of rotary machinery such as submersible pumps, pumps, fans, steam turbines, coal mills, oxygen generators, generators, centrifuges, compressors, motors, etc. It can also be applied to low-frequency vibration measurement of the impact of environmental vibration values on equipment such as underground pipelines, and automotive industry.

Technical Specs:

Input: +DC24V

Measuring range: 010/20*/50/100mm/s or 0100/200*/500um

Output: 4-20mA (or 1-5V/1-10V or RS485)

Output Impedance :

Piezoelectric Vibration transmitter, 0-100mm/s; 0-1000UM; 4-20mA, M12, C5015 connector, different length cable available.