Post Buy Requirement

Industrial Machinery

We are leaders in the market for providing best range of Hydrostatic Pressure Testing Machine, Electronic Torsion Testing Machine, RASN Hardness Testing Machine, Electronic Universal Testing Machine and Vickers Hardness Testing Machine

Hydrostatic Pressure Testing Machine

We have substantial warehouse that is well-equipped with the cutting-edge technologies and upgraded machines; thus, we are capable of entertaining the voluminous requirements with super ease. We have a dedicated staff that ensures the quality of material used for designing and production. The inspection is done on the initial stages to make the final product free from defect. Hydrostatic Pressure Testing Machine has a shiny finish on the surface and is available in a quality packaging.  

View Complete Details

Electronic Torsion Testing Machine

We keep the globally accepted packaging guidelines in consideration so that the products that we deliver are packed well and are safe from the external environmental factors such as shock, compression, temperature. By guaranteeing complete security of the products, we make sure that our buyers remain satisfied with us. For this, we store the entire lot in our state-of-the-art warehouse.

Features :

  • Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials Torque measurement is by torque transducer system.
  • Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist.
  • The accuracy of torque indication is + 1, of the true torque.


The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features :

  • Front panel membrane type key board for test setup.
  • 7 seg digital display of load displacement/extension.
  • Printer port interface.
  • Serial port for communication with PC.
  • Storage of important parameters such as peak load & maximum displacement after test.
  • Preload selection to take care of initial slippage.
  • Optional real time graph 8 PC software.

Technical Data


Download Detail File : Click Here
View Complete Details

RASN Hardness Testing Machine

We have a team of efficient personnel who sternly check the raw materials before final procurement. Thus, we ensure a qualitative array of products at customer's end. We work with an aim of fulfilling variegated requirements of the clients. And, for this, we have developed a large facility wherein we keep our products.

Details :

  • Principal - Rockwell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.
  • Operation - For Rockwell Test - In case of 'RASN' series machines for Rockwell tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator.
  • Rockwell Hardness Tester Model - RASN Suitable for Rockwell Tests. Manually Operated. Preliminary Test Force - 98.07 N (10kgf). Additional Test Force - 490.3, 882.6, 1373 (50.90, 140 kgf). otal Test Force - 588.4, 980.7, 1471N (60, 100, 150 kgf). Test Force Selection by external dialing. Auto zero setting dial gauge.


Optional Accessories :

  • Steel Ball Indentor 1/8", 1/4", 1/2"
  • Testing Table 200mm dia.
  • Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia.
  • Vari-rest to support odd shaped jobs.
  • Jominy test fixture for end quench test.
  • Gooseneck Adopter No.1
  • Special Diamond Indentor suitable for Gooseneck Adopter No.1
  • Short nib diamond indentor suitable for Gooseneck Adopter No. 1
  • Gooseneck Adopter No. 2

Specifications

Model RASN
Testing Table 50mm dia. 1
Testing Table 38mm dia. with'V' groove for round jobs 6-45 mm dia. 1
Diamond indentor – Rockwell 1
Steel Ball Indentor 1/16" with 5 spare balls 1
Test Block Rockwell 'C' 1
Test Block Rockwell 'B' 1
Allen Spanners 5
Screw Drivers 1
Clamping Device 1
Dash Pot Oil  1 Bottle
Wooden Box for Std. Accessories 1
Telescopic Sleeves for Elevating screw protection 1 Set
Machine Cover 1
Instruction Manual 1

Technical Data

Model Unit RASN
Major Load N   (kgf) 588.4, 980.7, 1471 
(60, 100, 150)
Minor Load N   (kgf) 98.07   10
Max. Test Height  mm 222
Depth of Throat mm  130
Net wt. Approx. kg. 65
Machine  Dimension   (Approx.) mm L-450,  W-265,  H-627

View Complete Details

Electronic Universal Testing Machine

We are known for providing only flawless range of products as we store the entire lot under safe environment in our spacious warehouse. Moreover, the lot is regularly checked by our experts. We assure you to deliver goods to the desired place, as we have strong distribution network and shipping facilities. Electronic Universal Testing Machine is made of the finest quality material with high precision and durability.  

View Complete Details

Vickers Hardness Testing Machine

With well-connected and substantial warehouse, we arrange the extensive range systematically to deal with urgent deliveries and orders. Our remarkably superior warehouse system helps us in keeping the range safe until the final send off. We assure you to deliver goods to the desired place, as we have strong distribution network and shipping facilities.

Features :

  • Testing range is very wide, from soft metal such as lead, upto the hardest. like hardness steel. Same hardness numberis obtained on the same specimen, regardless of the load applied.
  • The indication is tiny and allows testing of a precision finished part.
  • Loading and unloading cycle is motorised.
  • Thin sheet metal is perfectly tested because the load applied very small.
  • Built-in projection screen to get accurate results.


Specifications : FIE' Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation These testers are suitable for measuring the hardness Of precision metallic parts with wide testing range' from soft to hard and their accurate results are Widely acclaimed. These testers strictly conform to IS 1754 and ISO 6507-2.

Construction : The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse of time, the load is removed automatically. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen. The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen.

Standard Accessories


Download Detail File : Click Here

Technical Data


Download Detail File : Click Here

Graph Image


Download Detail File : Click Here
View Complete Details

Brinell Hardness Testing Machine

Headquartered in Delhi(India), we are a renowned name presenting a huge gamut of products. We store the entire range of products in our capacious warehouse and we follow the automated warehousing system for the safe assembling as well as storage of the products.

Details :

  • Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation.
  • A dial gauge in front measure depth of ball penetration. This facilites production testing within tolerance limits by compression method.
  • SAROJ Hardness Testers, Model B-3000 (H) & Model 3000 (O) are precision engineered confirming to IS : 22281 1968, BS : 240 and ASTM - E 10, however B-3000 (H) & B-3000 (O) are most suitable for production testing. These machines are designed to measure hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape

Technical Data

Model B - 3000 [ H ]
Loads kgf 250 to 3000 in stages of 250
Initial Load kgf 250
Max. test height mm 410
Dept of throat mm 200
Max. depth of elevating screw below
base ( approx. ) mm
180
Machine height ( approx ) mm 1127
Net Wight ( approx ) kg. 450
Drive motor HP 0.33
Mains supply V/cy/ph 415 / 50 / 3
Optical Device NIL

Standard Accessories

Model B - 3000 ( H )
Testing Table 200mm dia 1 pc.
Testing table 70mm dia with 'V' groove for round jobs 10 to 80mm dia. 1 pc.
Ball holder 5mm 1 pc.
Ball holder 10mm 1 pc.
Test Block HB-5/750 1 pc.
Test Block HB-10/3000 1 pc.
Brinell Microscope 1 pc.
Allen Spanner 7 pcs.
Telescopic Cover for elevating screw protection. 1 Set
Instruction manual 1 Book
View Complete Details

Impact Testing Machine

With our streamlined packaging system, we are capable of meeting standard as well as tailored packaging needs of the patrons. And, we make use of premium material for packaging. We have segregated units for each process and to ensure that raw materials used are up to the international quality norms, our professionals carry out stern checks beforehand.

Details :

  • Charpy test - The Charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.
  • Izod Test - The Izod Test piece is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.
  • Optional Accessories For It-30 I It 30 D Caliper gauge checking V notch for Izod & Charpy. Izod support for 0.450" dia Izod round specimen. Templates for checking 10 x10 mm. cross section of Izod/Charpy test specimen. Self centering tong for quick and accurate setting of Charpy test specimen. Depth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radius. notch milling cutter.

Specifications


Download Detail File : Click Here
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Industrial Machinery from Gautam Buddha Nagar, Uttar Pradesh by Shakya Testing Solution
Post Buy Requirement

Industrial Machinery

We offer the best product range of Hydrostatic Pressure Testing Machine, Electronic Torsion Testing Machine, RASN Hardness Testing Machine, Electronic Universal Testing Machine and Vickers Hardness Testing Machine.

Hydrostatic Pressure Testing Machine

We have substantial warehouse that is well-equipped with the cutting-edge technologies and upgraded machines; thus, we are capable of entertaining the voluminous requirements with super ease. We have a dedicated staff that ensures the quality of material used for designing and production. The inspection is done on the initial stages to make the final product free from defect. Hydrostatic Pressure Testing Machine has a shiny finish on the surface and is available in a quality packaging.  

View Complete Details

Electronic Torsion Testing Machine

We keep the globally accepted packaging guidelines in consideration so that the products that we deliver are packed well and are safe from the external environmental factors such as shock, compression, temperature. By guaranteeing complete security of the products, we make sure that our buyers remain satisfied with us. For this, we store the entire lot in our state-of-the-art warehouse.

Features :

  • Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials Torque measurement is by torque transducer system.
  • Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist.
  • The accuracy of torque indication is + 1, of the true torque.


The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features :

  • Front panel membrane type key board for test setup.
  • 7 seg digital display of load displacement/extension.
  • Printer port interface.
  • Serial port for communication with PC.
  • Storage of important parameters such as peak load & maximum displacement after test.
  • Preload selection to take care of initial slippage.
  • Optional real time graph 8 PC software.

Technical Data


Download Detail File : Click Here
View Complete Details

RASN Hardness Testing Machine

We have a team of efficient personnel who sternly check the raw materials before final procurement. Thus, we ensure a qualitative array of products at customer's end. We work with an aim of fulfilling variegated requirements of the clients. And, for this, we have developed a large facility wherein we keep our products.

Details :

  • Principal - Rockwell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.
  • Operation - For Rockwell Test - In case of 'RASN' series machines for Rockwell tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator.
  • Rockwell Hardness Tester Model - RASN Suitable for Rockwell Tests. Manually Operated. Preliminary Test Force - 98.07 N (10kgf). Additional Test Force - 490.3, 882.6, 1373 (50.90, 140 kgf). otal Test Force - 588.4, 980.7, 1471N (60, 100, 150 kgf). Test Force Selection by external dialing. Auto zero setting dial gauge.


Optional Accessories :

  • Steel Ball Indentor 1/8", 1/4", 1/2"
  • Testing Table 200mm dia.
  • Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia.
  • Vari-rest to support odd shaped jobs.
  • Jominy test fixture for end quench test.
  • Gooseneck Adopter No.1
  • Special Diamond Indentor suitable for Gooseneck Adopter No.1
  • Short nib diamond indentor suitable for Gooseneck Adopter No. 1
  • Gooseneck Adopter No. 2

Specifications

Model RASN
Testing Table 50mm dia. 1
Testing Table 38mm dia. with'V' groove for round jobs 6-45 mm dia. 1
Diamond indentor – Rockwell 1
Steel Ball Indentor 1/16" with 5 spare balls 1
Test Block Rockwell 'C' 1
Test Block Rockwell 'B' 1
Allen Spanners 5
Screw Drivers 1
Clamping Device 1
Dash Pot Oil  1 Bottle
Wooden Box for Std. Accessories 1
Telescopic Sleeves for Elevating screw protection 1 Set
Machine Cover 1
Instruction Manual 1

Technical Data

Model Unit RASN
Major Load N   (kgf) 588.4, 980.7, 1471 
(60, 100, 150)
Minor Load N   (kgf) 98.07   10
Max. Test Height  mm 222
Depth of Throat mm  130
Net wt. Approx. kg. 65
Machine  Dimension   (Approx.) mm L-450,  W-265,  H-627

View Complete Details

Electronic Universal Testing Machine

We are known for providing only flawless range of products as we store the entire lot under safe environment in our spacious warehouse. Moreover, the lot is regularly checked by our experts. We assure you to deliver goods to the desired place, as we have strong distribution network and shipping facilities. Electronic Universal Testing Machine is made of the finest quality material with high precision and durability.  

View Complete Details

Vickers Hardness Testing Machine

With well-connected and substantial warehouse, we arrange the extensive range systematically to deal with urgent deliveries and orders. Our remarkably superior warehouse system helps us in keeping the range safe until the final send off. We assure you to deliver goods to the desired place, as we have strong distribution network and shipping facilities.

Features :

  • Testing range is very wide, from soft metal such as lead, upto the hardest. like hardness steel. Same hardness numberis obtained on the same specimen, regardless of the load applied.
  • The indication is tiny and allows testing of a precision finished part.
  • Loading and unloading cycle is motorised.
  • Thin sheet metal is perfectly tested because the load applied very small.
  • Built-in projection screen to get accurate results.


Specifications : FIE' Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation These testers are suitable for measuring the hardness Of precision metallic parts with wide testing range' from soft to hard and their accurate results are Widely acclaimed. These testers strictly conform to IS 1754 and ISO 6507-2.

Construction : The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse of time, the load is removed automatically. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen. The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen.

Standard Accessories


Download Detail File : Click Here

Technical Data


Download Detail File : Click Here

Graph Image


Download Detail File : Click Here
View Complete Details

Brinell Hardness Testing Machine

Headquartered in Delhi(India), we are a renowned name presenting a huge gamut of products. We store the entire range of products in our capacious warehouse and we follow the automated warehousing system for the safe assembling as well as storage of the products.

Details :

  • Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation.
  • A dial gauge in front measure depth of ball penetration. This facilites production testing within tolerance limits by compression method.
  • SAROJ Hardness Testers, Model B-3000 (H) & Model 3000 (O) are precision engineered confirming to IS : 22281 1968, BS : 240 and ASTM - E 10, however B-3000 (H) & B-3000 (O) are most suitable for production testing. These machines are designed to measure hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape

Technical Data

Model B - 3000 [ H ]
Loads kgf 250 to 3000 in stages of 250
Initial Load kgf 250
Max. test height mm 410
Dept of throat mm 200
Max. depth of elevating screw below
base ( approx. ) mm
180
Machine height ( approx ) mm 1127
Net Wight ( approx ) kg. 450
Drive motor HP 0.33
Mains supply V/cy/ph 415 / 50 / 3
Optical Device NIL

Standard Accessories

Model B - 3000 ( H )
Testing Table 200mm dia 1 pc.
Testing table 70mm dia with 'V' groove for round jobs 10 to 80mm dia. 1 pc.
Ball holder 5mm 1 pc.
Ball holder 10mm 1 pc.
Test Block HB-5/750 1 pc.
Test Block HB-10/3000 1 pc.
Brinell Microscope 1 pc.
Allen Spanner 7 pcs.
Telescopic Cover for elevating screw protection. 1 Set
Instruction manual 1 Book
View Complete Details

Impact Testing Machine

With our streamlined packaging system, we are capable of meeting standard as well as tailored packaging needs of the patrons. And, we make use of premium material for packaging. We have segregated units for each process and to ensure that raw materials used are up to the international quality norms, our professionals carry out stern checks beforehand.

Details :

  • Charpy test - The Charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.
  • Izod Test - The Izod Test piece is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.
  • Optional Accessories For It-30 I It 30 D Caliper gauge checking V notch for Izod & Charpy. Izod support for 0.450" dia Izod round specimen. Templates for checking 10 x10 mm. cross section of Izod/Charpy test specimen. Self centering tong for quick and accurate setting of Charpy test specimen. Depth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radius. notch milling cutter.

Specifications


Download Detail File : Click Here
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us