Features :

• Purge economizer, an energy saving device reduces purge loss to as low as 50%.
• Programmable Controller, with clear functional displays, ensures uninterrupted operation even while tower changeover.
• Automatic drain valves in pre and oil filter to reduce moisture load and to ensure life of desiccant at no extra cost.
• All new Microprocessor based controller has a unique purge economizer. The dryer load can be manually set. It can also accept up to 3 compressor load/unload contact and compute dryer load dynamically. The purge is set accordingly. The controller also accepts a pressure input and purge air is controlled accordingly.

Operations Prefilteration: The moisture laden compressed air passes through the pre filter. Here moisture load is reduced through coalesence. Condensation is removed through the drain valve ADV1. At the oil filter (2) oil vapors are removed completely, small levels of oil/water condensation are purged through the valve ADV2. Compressed air is then passed through a 3 way valve into Tower. 

Drying :The Towers are filled with Activated Alumina as desiccant (Molecular sieve available as option). When air passes through Tower 1 which consists of "DRY" Dessicant, it gets completely dried, and passes through check valve and After Filter(3). At the after filter, Desiccant fines are removed. Therefore dry compressed air passes out at the outlet.

Regeneration : Regeneration takes place in 2 stages a) De-pressurisation b) By passing Dry air. Tower II consists of fully moist desiccant at pressure. This is suddenly De-pressurised by opening the purge valve. Water molecules weep out of the desiccant and appear on the surface. "Super Dry" purge air passes through the Regeneration "Nozzle" and the desiccant bed thereby completely carrying away the water molecules. Tower 2 gets regenerated and is ready for the next drying cycle.

Application :

• Instruments
• Machines
• Paint shop
• Textile Machines
• Pharma

Features :

• Guaranteed dew point performance
• No refrigerants used
• Desiccant immobilized to eliminate dusting
• Design simplicity
• Purge saving control
• CO & Dewpoint monitor
• Air quality mandated by NFPA 99

Application :

• Hospitals
• Rescue Operations
• Highly Polluted Project Areas

 

Other Details:

• Dryspell medical dryers delivers a dewpoint of +2^oC as mandated by NFPA 99. The dryspell medical dryers operates in the principle of pressure swing adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.
• Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Optional purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Optional dewpoint and Co monitor enables to monitor dewpoint and Co levels as mandated by NFPA 99.

We ensure that the products we deliver will remain completely damage free as we make use of the finest quality packing material. Moreover, the entire process is supervised by the experts. As we give utmost importance to the quality of the products, we produce them in accordance to the quality standards.

We package the entire range of products with industrial-grade wrapping supplies that are environment friendly and safe. Furthermore, the packaging is sturdy to protect against damage and to make sure the product is kept quality assured. With our inventory management system, we are capable to undertake urgent and massive requirements of the buyers at a time.

The packaging process commences under the vigil eye of the management and expert packaging material. They ensure that only experts certified packaging material is used to evade loss during transit. We have developed a large storage facility that is equipped with modern facilities for loading and unloading goods. Also, it assist us in meeting bulk requirements at a time.

Features :

• Purge economizer, an energy saving device reduces purge loss to as low as 50%.
• Programmable Controller, with clear functional displays, ensures uninterrupted operation even while tower changeover.
• Automatic drain valves in pre and oil filter to reduce moisture load and to ensure life of desiccant at no extra cost.
• All new Microprocessor based controller has a unique purge economizer. The dryer load can be manually set. It can also accept up to 3 compressor load/unload contact and compute dryer load dynamically. The purge is set accordingly. The controller also accepts a pressure input and purge air is controlled accordingly.

Operations Prefilteration: The moisture laden compressed air passes through the pre filter. Here moisture load is reduced through coalesence. Condensation is removed through the drain valve ADV1. At the oil filter (2) oil vapors are removed completely, small levels of oil/water condensation are purged through the valve ADV2. Compressed air is then passed through a 3 way valve into Tower. 

Drying :The Towers are filled with Activated Alumina as desiccant (Molecular sieve available as option). When air passes through Tower 1 which consists of "DRY" Dessicant, it gets completely dried, and passes through check valve and After Filter(3). At the after filter, Desiccant fines are removed. Therefore dry compressed air passes out at the outlet.

Regeneration : Regeneration takes place in 2 stages a) De-pressurisation b) By passing Dry air. Tower II consists of fully moist desiccant at pressure. This is suddenly De-pressurised by opening the purge valve. Water molecules weep out of the desiccant and appear on the surface. "Super Dry" purge air passes through the Regeneration "Nozzle" and the desiccant bed thereby completely carrying away the water molecules. Tower 2 gets regenerated and is ready for the next drying cycle.

Application :

• Instruments
• Machines
• Paint shop
• Textile Machines
• Pharma

Features :

• Guaranteed dew point performance
• No refrigerants used
• Desiccant immobilized to eliminate dusting
• Design simplicity
• Purge saving control
• CO & Dewpoint monitor
• Air quality mandated by NFPA 99

Application :

• Hospitals
• Rescue Operations
• Highly Polluted Project Areas

 

Other Details:

• Dryspell medical dryers delivers a dewpoint of +2^oC as mandated by NFPA 99. The dryspell medical dryers operates in the principle of pressure swing adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.
• Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Optional purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Optional dewpoint and Co monitor enables to monitor dewpoint and Co levels as mandated by NFPA 99.

We ensure that the products we deliver will remain completely damage free as we make use of the finest quality packing material. Moreover, the entire process is supervised by the experts. As we give utmost importance to the quality of the products, we produce them in accordance to the quality standards.

We package the entire range of products with industrial-grade wrapping supplies that are environment friendly and safe. Furthermore, the packaging is sturdy to protect against damage and to make sure the product is kept quality assured. With our inventory management system, we are capable to undertake urgent and massive requirements of the buyers at a time.

The packaging process commences under the vigil eye of the management and expert packaging material. They ensure that only experts certified packaging material is used to evade loss during transit. We have developed a large storage facility that is equipped with modern facilities for loading and unloading goods. Also, it assist us in meeting bulk requirements at a time.