GST : 27BRYPS1606N1ZW
Verified
Write a Review
Our Products
Hydraulic And Pneumatic Machines
2 Products availableOil Pump
2 Products availableManufacturing & Assembling Services
1 Products availableScissor Lifts
1 Products availablePressure Gauges
1 Products availableIndustrial Valves
1 Products availableBearings
1 Products availableHydraulic Press
1 Products availableOur offered Product range includes GM INDUCTION HEATER MODEL GM 12V, bearing induction heater, Induction Heater, Induction Heaters and Induction Heater for Pinion Gear Coupling Ring.
We offer gm induction heater model gm 12v vertical type.
GM Induction Heater Model GM 10M [6.0-8.5 KVA] unit with SWING ARM ARRANGEMENT 440V. 50Hz with Intelligent Micro Controller based electronics controls, suitable to heat the Jobs for mounting of the bearings id from 20 mm to 550 mm & weight upto 130 Kgs along with accessories with :-
MEMORY BACKUP FOR DIFFERENT 999 TYPES OF JOBS
REWRITABLE PROGRAMMING FOR OPERATING DATA
TURBO BOOSTER FACILITY FOR FAST HEATING.
Additional Information:
Payment Terms :
Packaging Details : BUBBLE PACKING
Delivery Time : 30 DAYS
gm induction heatersare designed to heat the bearings and other shrink-fit components prior to mounting, using latest technology intelligent microcontroller based electronic controls.
the life of bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.
gm induction heatersare available in different models for mounting, range of bearings having bore size from 10 mm and above. Fast, safe and economical heating of bearings is best features ofgm induction heaters.
gm induction heater - gm 04is light weight and portable for better performance. It has power capacity of 2 to 4.0 kva. The controls are intelligent microcontroller based programmable electronic controls. It has two operating modes, temperature mode and time mode. Both are controlled through feather touch key board. Both modes can be seen at the time of operation. It can also be used to heat bearings of larger diameter using a pair of raiser blocks size 55 x 55 x 130 mm. The unit can also be used to heat a plate of any magnetic material by placing the plate in place of the horizontal yoke across the vertical supports.
| TECHNICAL DATA SHEET | |
| Product Data | GM 04 |
| 1) Power | 2.0 to 4.0 KVA |
| 2) Voltage | 230V or 110V±10%, 50-60Hz |
| 3) Current (Max) | 10 / 18A |
| 4) Power Control | 25% 50% 75% & 100% |
| 5) Temperature Control (Range) | 0-250oC |
| Maximum Temperature | 400oC |
| Accuracy Temperature | ± 3oC |
| 6) Time-Control | 0-99 Minutes |
| 7) Residual Magnestium | <1A / cm |
| 8) Overall dimensions (wxdxh) (mm) | 300 X 270 X 330 |
| 9) Space between supports (wxh) (mm) | 140 X 130 |
| 10) Weight (Main Unit) | 27 Kg. |
| 11) Weight with Standard Yokes | 32 Kg |
| 12 ) Horizontal York Sizes (mm) | 20 X 20 X 250 for bore dia. 25 MM & above |
| 30 X 30 X250 for bore dia. 40 MM & above | |
| 55 X 55 X 250 for bore dia. 75 MM & above |
|
| 13) Colour of the Equipment | RED / BLUE & APPLE GREEN |
| Optional Accessories | |
| 1) Horizontal Yoke Sizes (mm) | 10 X 10 X 250 for bore dia. 12 MM & above |
| 15 X 15 X 250 for bore dia. 20 MM & above |
|
| 40 X 40 X 250 for bore dia. 55 MM & above |
|
| 45 X 45 X 250 for bore dia. 61 MM & above |
|
| 2) Digital Thermometer (0-500 C) | |
| 3) Roll-Sliding Model | |
| 4) Swing Arm Model | |
| 5) Riser Block (Pair) (mm) | |
| 6) Magnetic Temperature Probe | |
| 7) Equipment Trolley | |
| 8) Hydraulic Equipment Trolley | |
| GM Induction Heater Range | ||
| Induction Heater GM04 (2 to 4KVA) |
Induction Heater GM10 (6 to 10KVA) |
Induction Heater GM12 (12 to 16KVA) |
| Induction Heater GM25 (25 to 40KVA) |
Induction Heater GM50 (50 to 80KVA) |
Induction Heater GM100 (100 to 150KVA) |
| Induction Heater GMIR (25 to 150KVA) |
Motorised Bearing Extractor GM BEM 30 |
Motorised CTRB Extractor GM CTRB100 |
| GM Hydraulic Product Range | ||
| Hydraulic Puller GMP - Series | Hydraulic Puller with Separate Hand Pump GMS - Series | Hydraulic Puller with Inbuilt Pump GMM - Series |
| Hydraulic Pullerwith with Inbuilt Pump & Separator GMR - Series | Bearing Pullers GMBP - Series | Bearing Fitting Tool Kit |
| Highpressure Oil Injector GM IP - Series | Hydraulic Bearing Extractor GM BET - Series | Hydraulic Power Pack GM PC - Series |
| Hydraulic Stackers GM ST - series | Hydraulic Pallet Truck GM PT - Series | AC / DC Stackers GM ST 902 / 903 - Series |
| Hydraulic Scissor Lift GM SS 910 /909 Series | Drum Leafter cum Tilter GM DT - series | Hydraulic Press GM PP - Series |
| Hydraulic High Pressure Valves GM HV - Series | ||
A. P. Singh (G. M. Industries)
Unit No. 7, Shailesh Industrial Estate, Navghar, Vasai (east). Thane - 401 210 Maharashtra. India - 401210
Share us via
View Contact Number 
