Jaipur, Rajasthan, India
Verified
Add Review
Our Products
Machines And Equipments
2 Products availableWire Making & Cabling Machines
2 Products availableBusbar System
1 Products availableSpinning Machines
1 Products availableWe offer the best product range of 37 Bobbin Stranding Machine, 61 Bobbin Stranding Machine, Fork Type Stranding Machine, Rigid Stranding Machine and 19 Bobbin Stranding Machine.
Technical Specifcations For (1+6) Skip Machine
| Suitable For Bobbin Size | 630mm |
|---|---|
| Barral Die | 275mm |
| Traverse | 400mm |
| OAW | 475mm |
| Bore Size | 127mm |
| Pay off Stand | 1 – Nos Size 630mm |
| Capstan | gear box 1 Nos |
| Machine Guard | 1 Nos |
| Die Holder | 1 Nos |
| Shaping Head | 1 Nos |
| Counter Meter Stand | 1 Nos |
| Traverse unit | 1 Nos |
| Pillar Type Take up | 1 Nos |
| Up Down | 2hp gear motor = 2- Nos |
| Reverse Forward | 1.5hp gear motor = 2 Nos |
| Traverse | 1hp 1440RPM gear motor = 1 Nos |
| Main motor | 40hp 1440RPM motor = 1 Nos |
| Capstan motor | 10hp 1440RPM motor = 1 Nos |
| Panel | AC Drive Control Panel = 1 Nos |
| Reduction | Gear box 1/30ratio |
Technical Specifcations For 1+6 Tubular Stranding Machine
| Objectives | The Machine Will Be able to make 7 wire strands |
|---|---|
| Nurnber of Bobbins | 1+6 |
| Bobbins | Flange Diameter 630mm Overall Width 475mm Bore 127mm Barel 250mm Traverse 400mm |
| Minimum Speed of cage | 500 RPM |
| Stranding Pitch | 50mm to 300mm limited |
| Machine Center Height | 1000mm |
| Operating direction | Left to Right as your requarment |
| Closing die holding | A quick Clamping closing die holder to hold the closing die distance between Lay Plate and closing holder is adjustable by a hand wheel. |
| Measuring unit | The measuring unit consists of counter – meter and measuring pulley to measure accurately the length of wore produced |
|---|---|
| Haul off device | 1000 mm grooved type dual capstan will be provided the haul off consists finely polished dual grooved capstan wheel driven by means of gear box left and right hand lays can be obtained lay change is effected by means of change gears Lay – 50mm to 300mm limited |
| Lay Change Gear Box & Speed | Lay Will be 50mm to 300mm Lay Change through 10hp gearmotor & A/C Drive Panel (fully automatic) |
| Traverse | The unit will be driven by separately 1 hp Geared motor |
| Take up unit | The Take up Stand suitable for 2000 mm die drum and traverse 1000 mm ,Pillar Type Take up |
| Drum Size | Flange Diameter 2000mm Traverse 1000mm Overall width 1600 mm Barrel Diameter 600 mm to 800mm Bore Diameter 80 mm |
| Line Description | |
|---|---|
| PAY OFF Unit | |
| Pay off Stand For Bobbin | Suitable For 630 mm Flange Dia Bobbins. |
| Bobbin Holding | Pintle Type clamping and loosen bobbins ,Lifting By manual operation |
| Stranding Machine | |
| Stranding | The machine will be able to make 7 wire strands |
| No . of Bobbin | 1+6 |
| Tube for Bobbins | Rotating type on under roller. The under rollers are of Hylem Material. The revolution of the will be 500RPM to ,with 30hp AC motor. With frequency drive and the tube cage will be balanced. Pneumatic brake will be provided fixed type. |
| Rotor | M.S Tube are accurately machined and coupled together to form the rotor, which is supported on under – rollers. All the cradles are M S Fabricated in the tube and are provided with bobbin shaft locking arrangement and wire tensioning device. |
| Bobbin Holding | The bobbins are placed between steel pintles which are fixed with safety locking device (spring type ) as well as with tension device. |
| Guide Pulleys | Anti-frictional bearings and guide nipples will be provided for free path to lead off wire. |
| Brake | Conventional caliper type disk brakes frictional pneumatic brakes on both the ends of the rotor. |
| Safety Guards | We will provide protective guards of the rotor with doors. (Sliding Type) |
