GST : 24ALDPS4196B1Z6
Verified
Write a Review
Our Products
Petrochemicals & Petroleum Products
1 Products available
Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners.
Fuel Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates.
Additional Information:
Payment Terms : L/C, D/A
Packaging Details : Barrel And Tanker Load Only.
Delivery Time : 24 Hour Or As Per Location And Distance
Specification
| Parameter / Characterstics | Test Method | Specifiction Limit & Unit | Test Results |
| Specific Gravity @ 30 C | SP/TM/003 | g/ml 0.9 to 0.92 | 0.9 |
| Flash Point | SP/TM/004 | g/ml 50 to 60 | 52.5 |
| Kinematic Viscocity & 30 C | SP/TM/005 | g/ml 2.5 to 15.7 | 4960 CST |
| Pure Point | SP/TM/006 | g/ml < = 12 | 1 C |
| Rams Bottom Carbon Residue | SP/TM/007 | g/ml < = 0.50 | 0.90% W |
| Ash content | SP/TM/008 | g/ml < = 0.02 | 0.002% wt |
| Total Sulpher | SP/TM/009 | g/ml < = 1.8 | 1.49% wt |
| Water Content | SP/TM/010 | g/ml < = 0.25 | 0% vol |
| Calerific Value | SP/TM/011 | g/ml 9000 to 10500 kgs | 9600 kgs |
Uses : Aromatic solvent C10 is a high boiling point (181-205 °C) aromatic hydrocarbon solvent used mainly in paints and coatings, printing inks, and the agrochemical industry. It has a flash point and evaporation rate higher than that of Xylene and therefore imparts better flow and film formation making it useful in the paint and coatings industry. It also has no ethyl-benzene content and is therefore desired for environmentally friendly agrochemical and pesticide formulations.
Aromatic solvent C10 is a resin blendstock for foundries and has down hole applications in oilfields. It is also ideal for use in process additive fluids such as chloro-rubber formulations, synthetic resins, and oil-modified alkyds.
Uses : The products will serve a broad range of industries and applications like Paints and Coatings, Printing Inks and Reducers, Offset inks, Agro-chemicals, Surfactants, Emulsifiers, Oil Field Chemicals, Foundry Chemicals, Water Treatment Chemicals, Disinfectants, Wash Oils, , etc. The emphasis is on significant value addition through development of specialty chemicals and niche products.
Additional Information:
Payment Terms : L/C, D/A
Packaging Details : Barrel And Tanker Load Only.
Specification
| Parameter / Charactersticts | Test Method | Specifiction Limit & Unit | Test Result |
| Specific Gravity @ 15.6 C | ASTM D1298 | NA 0.8900 to 0.8950 | 0.91 |
| Flast Point | ASTM D93 | C 32 to 66 | 42 |
| Distilition IBP | ASTM D86 | C 150 Min. | 156 |
| Distilition FBP | ASTM D86 | C 270 Max | 229 |
| Ash Content | IS3321 | Wt. % PpM to Max | 18 |
| Total Aromatics | UOP 915 | Wt. % 75.0 Min. | 98.73 |
| Total Non Aromatics | UPO 915 | Wt % 25.00 Max | 1.27 |
| Gross Calorfic Value | - | Kcal / Kg 10500 to 12000 | 10571 |
Uses : The products will serve a broad range of industries and applications like Paints and Coatings, Printing Inks and Reducers, Offset inks, Agro-chemicals, Surfactants, Emulsifiers, Oil Field Chemicals, Foundry Chemicals, Water Treatment Chemicals, Disinfectants, Wash Oils, , etc. The emphasis is on significant value addition through development of specialty chemicals and niche products.
Additional Information:
Payment Terms :
Packaging Details : Barrel And Tanker Load Only.
Delivery Time : 24 Hour Or As Per Location And Distance
Specification
| Parameter / Charactersticts | Test Method | Specifiction Limit & Unit | Test Result |
| Specific Gravity @ 15.6 C | ASTM D1298 | NA 0.8900 to 0.8950 | 0.91 |
| Flast Point | ASTM D93 | C 32 to 66 | 42 |
| Distilition IBP | ASTM D86 | C 150 Min. | 162 |
| Distilition FBP | ASTM D86 | C 270 Max | 234 |
| Ash Content | IS3321 | Wt. % PpM to Max | 18 |
| Total Aromatics | UOP 915 | Wt. % 75.0 Min. | 76 |
| Total Non Aromatics | UPO 915 | Wt % 25.00 Max | 61 |
| Gross Calorfic Value | - | Kcal / Kg 10500 to 12000 | 11327 |
Mr. Vahid Shaikh (Shaikh Petroleum)
13, Old Colony, Near Valia Crossing, GIDC, Ankleshwar Gidc, Gujarat - 393002
https://www.shaikhpetroleum.co.in
Share us via
View Contact Number 
