Ambala, Haryana, India
Our Products
Measurement Gauges & Fittings
2 Products availableSoil Testing Equipment
2 Products availableLaboratory Equipments
2 Products availableConstruction Machinery & Equipment
2 Products availableTables
1 Products availableWe offer the best product range of HYDRAULIC COMPUTERIZED VERSION UTM, Torsion Testing Machine, Los Angeles Abrasion Testing Machine, Tile Abrasion Testing Machine and Flexure Testing Machine.
1.Peak load along with on line load
2.Maximum elongation with online elongation
3.Ultimate Tensile Strength
4.Graphical Display of Load vs. Time
5.Graphical Display of Elongation vs. Time
6.Graphic Display of Load vs. Elongation
7.Graphic Display of Stress vs. Strain
8.Complete Statistical Analysis
9.Data Report Management
Loading accuracy as high as 1% Straining at variable speeds to suit a wide range of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head to facilitate rapid fixing of test specimen Continuous roll autographic recorder supplied as standard to enable study of the behaviour of materials High reading accuracy due to large size and design of dial Large effective clearance between columns enables testing of standard specimens as well as structures Easy change from plain to threaded and screwed specimens Robust staining frame of an extremely rigid construction Fully enclosed and protected pendulum Simple controls for ease of operation operation ensured by means of safety devices Wide range of standard and optional accessories, including load stabilizer Chrome Plated Metal Components Plain & threaded columns. are hard chrome-plated to give the machine a perpetual new look
It is designed for conducting Torsion and Twist Tests on various metal wires, tubes sheet materials. Torque measurement is by Pendulum dynamometer System. Torque ranges can be adjusted. Torque is applied to specimen by geared motor through gear box. Autographic recorder can be provided to know the relation between torque and angle of twist on specific request. The Accuracy of the torque indication is 1% of the true torque. The complete system is hydraulicly damped for vibration free Loading
BIS-2386. For determination of resistance to wear of coarse aggtregate by abrasion. A rolled steel drum totally closed except for removable dust-tight cover is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. The drum is rotated by one h.p. electric motor. A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 r.p.m. inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests. Supplied with 12 abrasive charges 48 mm. dia and Revolution Counter fitted to rotating shaft.
BIS-1237, 1706. The tile sample is pressed under a specified load against a grinding path, strewn evenly with an abrasive powder revolving at the rate of 30 1 revolutions per minute. The wear of the tile is measured using a thickness gauge.
The abrasion machine consists of a replaceable grinding path fitted on a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder.
Supplied complete with automatic pre-set revolution counter and one 7.5 kg. weight but without abrasive powder and thickness gauge. Suitable for operation on 415 Volts, 50 Cycles, 3 Phase A.C. supply.
A.100 KN Flexure Testing Machine Hand Operated.BIS-516. For Flexure Strength Test on moulded concrete flexure test specimens of 15 cm x 15 cm x 70 cm or 10 cm x 10 x 50 cm. size by third point loading method.
The machine consists of a welded steel frame. The hydraulic jack of 100 KN. Capacity is fitted with the top plate and its ram moves down words for load application. To the ram of the jack is attached to top loading beam with two 38 mm diameter rollers which can be placed at 133 mm or 200 mm centres for loading 10 cm or 15 cm beam respectively. The retaining springs are provided for the rollers and two retaining springs for the loading ram. A supporting beam with two 38 mm dia rollers is placed on the base of the machine. These rollers are also held with retaining springs and their centre distance can be set either at 400 mm or 600 mm for 10 cm x 10 cm x 50 cm and 15 cm x 15 cm x 70 cm beams respectively.
A hand operated double action hydraulic pump with oil reservoir is attached to the right side of the machine. A 15 cm pressure gauge calibrated from 0 100 KN in 1 KN division is also supplied which can be fitted to an adaptor at the top of the machine. Supplied complete with an operating handle.
Maximum Daylight 175 mmMaximum Ram Travel 75 mm
The pumping unit is of double plunger type. All the moving parts of the pumping unit are housed in the oil reservoir, which ensures positive lubrication. The drive from the motor to the pump is through a V-belt. A separate single plunger hand operated pump is also incorporated in the unit for operation in case of power breakdown.
A 20 cm dia pressure gauge is fitted in the console at an angle for easy of reading and a maximum red pointer is provided on the gauge to record the load at failure.
A micro-switch to protect against overloads and a relay to avoid the accidental self starting of the machine, after a power breakdown on subsequent restoration of power, are incorporated in the electrical control circuit.Suitable for operation on 220 Volts, 50 Hz., Single phase.
